• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.497-502
• /
• 2013

본 논문에서는 종류가 다른 부직포가 삽입된 하이브리드 복합재료의 Mode I 층간파괴인성에 관한 연구를 수행하였다. Mode I 층간파괴인성값($J/m^2$)은 DCB실험에 의하여 얻어졌으며, 부직포를 삽입하지 않은 시편과 3종류의 부직포(8 $g/m^2$의 탄소부직포, 10 $g/m^2$의 유리부직포, 8 $g/m^2$의 폴리에스테르부직포)가 각각 삽입된 시험편에 대하여 실험을 수행하였다. 각 시험편들에 대한 Mode I 층간파괴인성값은 부직포를 삽입하지 않은 시편을 기준으로 탄소부직포를 삽입한 시편은 6.3% 감소하였고, 유리부직포를 삽입한 시편은 약 11.4% 감소한 반면 폴리에스테르부직포를 삽입한 시편은 약 69.4% 증가하였다. 폴리에스테르부직포는 탄소부직포에 비해 저렴하며 가볍고, Mode I 층간파괴인성값을 크게 증가시킴을 알 수 있었다.