• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.186-196
• /
• 2006

The turbulent wake flow of an axisymmetric body at incidence of $10.1^{\circ}$ is investigated by commericial CFD code, Fluent 6.2. Reynolds stress turbulence model with wall function is applied for the turbulent flow computation. For the grid generation, the Gridgen V15 is used. Numerical predictions are compared with experimental data for the validation. The computed results show goof agreements with the experimental measurements, implying that the CFD analysis is a useful and efficient tool for predicting turbulent flow characteristics of wake field of an axisymmetric body at incidence.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.103-108
• /
• 2010

This article presents computational fluid dynamics (CFD) simulations of nanoparticle movements and flow characteristics in laboratory-scale electrostatic precipitator (ESP) without corona discharge, and for simulation, it uses the commercial CFD program(CFD-ACE) including electrostatic theory and Lagrangian-based equation for nanoparticle movement. For validation of CFD results, a simple cylindrical type of ESP is simulated and numerical prediction shows fairly good agreement with the analytical solution. In particular, the present study investigates the effect of particle diameter, inlet flow rate, and applied electric potential on particle collection efficiency and compares the numerical prediction with the experimental data, showing good agreement. It is found that the particle collection efficiency decreases with increasing inlet flow rate because the particle detention time becomes shorter, whereas it decreases with the increase in nanoparticle diameter and with the decrease of applied electric voltage resulting from smaller terminal electrostatic velocity.

• Wind and Structures
• /
• 제22권4호
• /
• pp.503-524
• /
• 2016

The suitability of Computational Fluid Dynamics (CFD) simulations on the built environment for the purpose of estimating average roughness characteristics and for studying wind flow patterns within the environment is assessed. Urban models of various levels of complexity are considered including an empty domain, array of obstacles arranged in regular and staggered manners, in-homogeneous roughness with multiple patches, a semi-idealized built environment, and finally a real built environment. For each of the test cases, we conducted CFD simulations using RANS turbulence closure and validated the results against appropriate methods: existing empirical formulas for the homogeneous roughness case, empirical wind speed models for the in-homogeneous roughness case, and wind tunnel tests for the semi-idealized built environment case. In general, results obtained from the CFD simulations show good agreement with the corresponding validation methods, thereby, giving further evidence to the suitability of CFD simulations for built environment studies consisting of wide-ranging roughness. This work also provides a comprehensive overview of roughness modeling in CFD-from the simplest approach of modeling roughness implicitly through wall functions to the most elaborate approach of modeling roughness explicitly for the sake of accurate wind flow simulations within the built environment.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.425-429
• /
• 2008

The present study has been conducted to improve temperature distribution in the motor housing of vacuum cleaner and reduce the development period by CFD analysis. CFD analysis is performed to investigate the thermal flow pattern in the motor housing and validated by experiments. The validation of CFD analysis is conducted by comparing the temperature distribution on motor housing cover. Through the present study the CFD analysis procedure in the motor housing of vacuum cleaner is established and various experimental materials are obtained. These analysis results can be used effectively as design factors of vacuum cleaner.

• 한국해안·해양공학회논문집
• /
• 제31권4호
• /
• pp.199-208
• /
• 2019

2차원 조파수조에서 완전반사 조건의 규칙파 조파 실험을 수행하고, 세 가지 서로 다른 CFD 모델의 성능을 검증하였다. 사용된 CFD 모델은 CADMAS-SURF, olaFlow 및 KIOSTFOAM이었다. 쇄파가 발생하지 않는 조건, 중복파의 쇄파가 발생하는 조건, 입사파의 쇄파가 발생하는 조건에서 실험 및 모델링을 수행하였다. 그 결과 세 모델 중 KIOSTFOAM이 실험결과를 가장 잘 재현하는 것으로 나타났다. CADMAS-SURF는 KIOSTFOAM에 비해 계산 시간은 줄어들지만 계산 정확도가 상대적으로 더 낮았다. olaFlow는 계산은 가장 빠르지만 조파 경계에서 반사파 흡수가 만족스럽지 않고 쇄파 발생 시 파랑에너지를 과도하게 소산시키는 것으로 나타났다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.146-146
• /
• 2002

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.14-16
• /
• 2007

A critical problem in the integration of stores into new and existing aircraft is the safe separation of the stores from the aircraft at a variety of flight conditions representative of the aircraft flight regime. Typically, the certification of a particular store/aircraft/flight condition combination is accomplished by a flight test. Flight tests are very expensive and do expose the pilot and aircraft to a certain amount of risk. Wind tunnel testing, although less expensive than flight testing, is still expensive. Computational Fluid Dynamics(CFD) has held out the promise of alleviating expensive and risk by simulating weapons separation computationally. The forces and moments on a store at carriage and at various points in the flow field of te aircraft can be computed using CFD applied to the full aircraft and store geometry. This study needs full dynamic characteristics study and flow analysis for securing store separation safety. Present study performs dynamic simulation of store separation with flow analysis using Chimera grid scheme which is usually used for moving simulations.

• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.259-267
• /
• 2017

본 연구에서는 카이스트에서 개발된 비정렬격자 기반의 유동 해석자를 이용하여 KARI-11-180 익형, SDM과 천음속 비행체 주변 유동장에 대한 수치해석을 수행하였다. 유동장을 해석하기 위하여 RANS가 수치적으로 풀이되었으며, Roe가 제안한 FDS 방법을 사용하여 비점성 플럭스를 계산하였다. 난류 모델은 SA 모델, SST 모델, ${\gamma}-{\widetilde{Re}}_{{\theta}t}$모델이 사용되었다. KARI-11-180 익형 유동 해석 결과 천이현상을 고려하였을 때 항력 계수가 더 작게 예측되었으며, 계산된 공력 특성은 전반적으로 실험 결과와 잘 일치하였다. SDM의 경우 날개 앞전에서 유동 박리현상이 발생하였으며, 계산된 공력 특성이 EFD 결과와 유사한 경향을 보였다. 천음속 비행체의 경우 자유류 마하수가 0.9일 때 주 날개에서 발생하는 충격파를 성공적으로 포착하였으며, 실험 결과와 해석된 결과 사이의 유사성을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.13-20
• /
• 2000

The applications of CFD in the design process of a transonic civil transport at Korea Aerospace Research Institute (KARI) are outlined. Three Navier-Stokes solvers, developed at KARI with different grid approaches, are used to predict the aerodynamic coefficients and solve the flowfield of various configurations. Multi-block, Chimera, and unstructured grids are the approaches implemented. The accuracy of the codes is verified for the transonic flow about RAE wing/fuselage configuration. The multi-block code is used to provide the detailed data on the flowfield around a wall interference model with different test section sizes which will be used in establishing the wall interference correction method. The subsonic and transonic flowfields about K100-04A, one of the configurations of a 100-seater transport developed by KARI and Korea Commercial Aircraft Development Consortium (KCDC), are computed to predict the aerodynamic coefficients. The results for the subsonic flow are compared with those of wind tunnel test, and the agreement is found to be excellent. The interference effect of nacelle installation on the wing of K100-04A is also investigated using the unstructured grid method, and about 10% reduction in wing lift is observed. The accuracy of the three developed codes is verified, and they are used as an efficient tool in the design process of a transonic transport.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.9-16
• /
• 2012

This paper presents the numerical results of a simulation of the free surface flow around a blunt bow ship model and focuses on the validation of the proposed method with a brief investigation of the relation between the resistance and free surface behavior. A finite volume method based on the Reynolds Averaged Navier-Stokes (RANS) approach is used to solve the governing flow equations, where the free surface, including wave breaking,is captured by using a two-phase Level-Set (LS) method. For turbulence closure, a two equation k-${\varepsilon}$ model with the standard wall function technique is used. Finally, the numerical results are compared with the available experimental data, showing good agreement.