• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4071-4075
• /
• 2016

Background: FDG PET/CT is at an equivocal stage to recommend for staging of colorectal cancer as compared to contrast-enhanced CT (ceCT). This study was intended to evaluate the value of FDG PET/ceCT in colorectal cancer staging as compared to ceCT alone. Materials and Methods: PET/ceCT was performed for 61 colorectal cancer patients who were prospectively enrolled in the study. Three patients were excluded due to loss to follow-up. PET/ceCT findings and ceCT results alone were read separately. The treatment planning was then determined by tumor board consensus. The criteria for T staging were determined by the findings of ceCT. Nodal positive by PET/ceCT imaging was determined by visual analysis of FDG uptake greater than regional background blood pool activity. The diagnostic accuracy of T and N staging was determined only in patients who received surgery without any neoadjuvant treatment. Results: Of 58 patients, there were 40 with colon cancers including sigmoid cancers and 18 with rectal cancers. PET/ceCT in pre-operative staging detected bone metastasis and metastatic inguinal lymph nodes (M1a) that were undepicted on CT in 2 patients (3%), clearly defined 19 equivocal lesions on ceCT in 18 patients (31%) and excluded 6 metastatic lesions diagnosed by ceCT in 6 patients (10%). These resulted in alteration of management plan in 15 out of the 58 cases (26%) i.e. changing from chemotherapy to surgery (4), changing extent of surgery (9) and avoidance of futile surgery (2). Forty four patients underwent surgery within 45 days after PET/CT. The diagnostic accuracy for N staging with PET/ceCT and ceCT alone was 66% and 48% with false positive rates of 24% (6/25) and 76% (19/25) and false negative rates of 47% (9/19) and 21% (4/19), respectively. All of the false negative lymph nodes from PET/ceCT were less than a centimeter in size and located in peri-lesional regions. The diagnostic accuracy for T staging was 82%. The sensitivity of the peri-lesional fat stranding sign in determining T3 stage was 94% and the specificity was 54%. Conclusions: Our study suggested promising roles of PET/ceCT in initial staging of colorectal cancer with better diagnostic accuracy facilitating management planning.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.2
• /
• pp.161-167
• /
• 2011

Proton conductors have attracted considerable attention for solid oxide fuel cell (SOFC), hydrogen pump, gas sensor, and membrane separators. Doped $SrCeO_3$ exhibits appreciable proton conductivity in hydrogen-containing atmosphere at high temperature. However commercial realization has been hampered due to the reactivity of $SrCeO_3$ with $CO_2$. The chemical stability and proton conductivity are dependent on dopant type. The purpose of this work is to investigate chemical stability of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composites in $CO_2$ and $H_2$ gases. Thermogravimetric analysis (TGA) was performed in gaseous $CO_2$ and electrical conductivity of the composites were also measured between 500 and $900^{\circ}C$ in air and $H_2$ atmosphere. $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composite membranes showed good chemical stability of in $CO_2$ atmosphere and high conductivity at hydrogen condition. The hydrogen permeation of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composite membranes was investigated as a function of volumetric content of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}$. The $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$(6:4) membrane with a thickness of 1.0 mm showed the highest hydrogen permeability with the flux reaching of 0.12 $ml/min{\cdot}cm^2$ at $800^{\circ}C$ in 100%$H_2/N_2$ as feed gas.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.232-232
• /
• 2009

최근 WGS반응용 Pt 촉매의 성능 향상을 위한 다양한 담체 및 조촉매(Promotor) 개발에 대한 연구가 활발하게 진행되고 있다. 선행 연구결과, 입방(Cubic)구조를 가지는 $Ce_{0.8}Zr_{0.2}O_2$ 담체는 정방 입계(Tetragonal)구조를 가지는 $Ce_{0.2}Zr_{0.8}O_2$ 담체 또는 혼합산화물(Mixed oxide)구조를 가지는 $Ce_{0.5}Zr_{0.5}O_2$ 담체 보다 높은 활성과 안전성을 가진다. 이것은 촉매의 성능 향상이 Ce-$ZrO_2$의 결정구조에 의존한다는 것을 나타낸다. 따라서 WGS 반응에서 Ce/Zr 비에 따라 변화된 담체 특성이 Pt 촉매의 활성에 영향이 있을 것으로 예상되며 실험결과 1% Pt/$CeO_2$ 촉매가 가장 높은 활성을 나타내었다. 따라서 Pt/Ce-$ZrO_2$ 촉매의 성능 향상을 위해 Ce-$ZrO_2$ 담체에 조촉매인 Ni을 첨가하여 촉매적 활성을 비교하여 보았다. 촉매는 2%의 Pt과 15%의 Ni로 고정하였고 Ce/Zr 비를 제조변수로 하였다. 제조된 모든 담체는 공침법(Co-precipitation)을 사용하여 제조하였으며 $500^{\circ}C$에서 6시간 소성하였다. Pt 촉매는 함침법 (Incipient wetness impregnation)으로 담지 시켰다. 2% Pt/Ce-$ZrO_2$ 촉매와 2% Pt/15% Ni-Ce-$ZrO_2$ 촉매는 저온영역($200^{\circ}{\sim}320^{\circ}C$)에서 비슷한 CO 전환율을 나타내었으나 고온영역($360^{\circ}C{\sim}400^{\circ}C$)에서는 2% Pt/15% Ni-Ce-$ZrO_2$ 촉매가 더 높은 CO의 전환율을 나타내었다. 이것은 Ni의 영향으로 고온에서 부반응인 메탄화 반응(Methanation reaction)이 생긴 것으로 판단되어 메탄($CH_4$)의 선택도를 살펴본 결과 2% Pt/15% Ni-Ce-$ZrO_2$ 촉매가 고온영역($360^{\circ}{\sim}400^{\circ}C$)에서 급격하게 증가하는 것으로 나타나 메탄화 반응이 일어난 사실을 증명한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.876-881
• /
• 1999

Fresh onions were extracted by two methods of conventional extraction(CE) and microwave assisted extraction(MAE) under different extraction conditions. Onion extracts obtained by CE and MAE were examined in oleoresin yield and physiological activities. The optimal extraction time of MAE was about 5 minutes, whereas that of CE was 2 hours. Therefore extraction time was shortened drastically by MAE but there was no significance in oleolesin yield. The electron donating abilities also showed negligible difference between two extracts obtained by CE and MAE, and 45% level in CE and 50% level in MAE. The nitrite scavenging effect was diminished while pH was increasing, and showed a high elimination effect over 85% at pH 1.2. The tyrosinase inhibitory effect was 20% level in both CE and MAE when water was used and 40% level when ethyl alcohol was used. The angiotensin I converting enzyme inhibitory effect showed higher activity with 70% level in MAE than 60% level in CE. The pyruvic acid content was 6.8 and 6.4 moles per 1g of fresh onion by CE and MAE when water was used, and was 4.3 and 5.6 moles by CE and MAE when ethyl alcohol was used.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.321-328
• /
• 2019

The detection performances of the NaI(Tl), $LaBr_3$(Ce) and $CeBr_3$ scintillation detectors, which can be used to rapidly evaluate the major artificial radionuclides deposited on the soil surface in a nuclear accident or radiological emergency, were compared. Detection performance was assessed by calculating the minimum detectable activity (MDA). The detection efficiency of each detector for artificial radionuclides was semi-empirically determined using mathematical modelling and point-like sources having certified radioactivity. The background gamma-ray energy spectrum for MDA evaluation was obtained from relatively wide and flat grassland, and the MDA values of each detector for the major artificial radionuclides that could be released in nuclear accidents were calculated. As a result, the relative MDA values of each detector regarding surface deposition distribution at normal environmental radiation level were evaluated as high in the order of the NaI(Tl), $LaBr_3$(Ce), and $CeBr_3$ detectors. These results were compared based on each detector's intrinsic and measurement environment background, detection efficiency, and energy resolution for the gamma-ray energy region of the radionuclide of interest.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.276-279
• /
• 2009

ITO and ITO:Ce films were deposited by DC magnetron sputtering using an ITO ($SnO_2$: 10 wt%) and $CeO_2$ doped ITO ($CeO_2$: 0.5, 3.0, 4.0 and 6.0 wt%) ceramic targets, respectively, on unheated polyethylene terephthalate (PET) substrates. The lowest resistivity $6.7{\times}10^{-4}{\Omega}cm$ was obtained from ITO:Ce film deposited using $CeO_2$ (3.0 wt%) doped ITO target. On hte other hand, ITO:Ce (0.5wt%) film has the excellent mechanical durability which was evaluated by bending test. This result was attributed to the higher binding energy of $CeO_2$ compared to $SnO_2$ and $In_2O_3$. Therefore, $CeO_2$ atoms have a small displacement caused by the bombardment of high energy particles, and it attribute to the increase in adhesion caused by decrease in internal stress. The average transmittance of the films was more than 80% in the visible region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.122-127
• /
• 2000

Microstructural evolutions in ceria-stabilized zirconia (Ce-TZP) and alumina-dispersed Ce-TZP ceramics were investigated as functions of doping and annealing conditions. All of sintered specimens showed the relative density over 99 %. Sintered specimens had linear grain boundaries and normal grain shapes, but ceria-doped specimens had irregular grain shapes and nonlinear grain boundaries due to the diffusion-induced grain boundary migration during annealing at $1650^{\circ}C$ for 2 h. Mean grain boundary length of Ce-TZP with irregular grain shapes was higher than that of normal grain shapes, and was a value of 23pm at the maximum. Alumina particles dispersed in Ce-TZP inhibited the grain growth of zirconia particles. $Al_2O_3$Ce-TZP doped with ceria and annealed at $1650^{\circ}C$ for 2 h showed irregular grain shapes as well as small grain size. Added alumina particles showed the grain growth during sintering or annealing, and they changed the position from grain boundary to inside of the grains during the annealing. The specimens with normal grain shapes showed an intergranular fracture mode, whereas the specimens with irregular grain shapes showed a transgranular fracture mode during the crack propagation.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.51-56
• /
• 2001

$CeO_2$ thin films as insulator for MFISFET (Metal-ferroelectric-insulator- semiconductor-field effect transistor) were deposited by r.f. magnetron sputtering. Ar and $O_2$ gas as the deposition gas were used and the effects of oxygen partial pressure during sputtering on texture and electrical properties of $CeO_2$ thin films were evaluated. All $CeO_2$ thin films deposited on p-type Si(100) substrate at $600^{\circ}C$ exhibited (200) preferred orientation. The films deposited with only Ar gas among various condition had highest preferred orientation but show large hysteresis characteristics in capacitance-voltage measurement due to relatively many charged paricles and roughness. Films show smooth surface state and good C-V characteristics with increasing oxygen partial pressure. It was thought that this trend in C-V characteristics was due to the amount of mobile ionic charge within $CeO_2$ films. The composition of films show oxygen excess, that is, O/$Ce_2$ ratio of films was 2.22~2.42 range and leakage current of films show $10^{-7}~10^{-8}A$order at 100 kV/cm.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.202-206
• /
• 1992

The $CeO_2$-added Y-Ba-Cu-O oxides were prepared by the partial melt process involving the peritectic reaction, liquid + 2-1-1 phase ${\rightarrow}$ 1-2-3 phase, to investigate the effect of the dopant on microstructure and superconductivity. During the peritec reaction, all the added $CeO_2$ was converted to $BaCeO_3$ particles which were finely dispersed in large 1-2-3 grains. Superconducting transition temperature($T_{c}R=0$ point) of the partial-melted samples was as high as 90K regardless of $CeO_2$ content up to 5wt%, which is owing to the separation of the second phase from the 1-2-3 superconducting phase.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.679-684
• /
• 1997

The major constituents in spent FCC catalysts are Si, Al, Fe, Ti, alkali metals and some others. The spent catalyst is also composed small amounts of rare metals such as Ce, Nd, Ni and V. The selective adsorption and concentration of Ce and Nd from the leaching solution of spent FCC catalysts with sulfuric acid($0.25mol/dm^3$) were carried out by the column method with a chelate resin having a functional group of aminophosphoric acid type. Ce and Nd were separated from eluate liquor containing Al, Nd and V by the precipitation process with oxalic acid. Vanadium is purified from chloride ion coexistance by solvent extraction, employing tri-n-octyl phosphine oxide as extractant with Al in the raffinate solution. Rare metals with the purity of 99 percent were obtained from the spent FCC catalyst.