• 제목/요약/키워드: CDMA communication

검색결과 960건 처리시간 0.027초

CSTR 하.폐수처리장의 국지 제어 및 원격 최적화 시스템 (Local Control and Remote Optimization for CSTR Wastewater Treatment Systems)

  • 배현;서현용;김성신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
    • /
    • pp.21-25
    • /
    • 2002
  • Activated sludge processes are widely used in biological wastewater treatment processes. The main motivation of this research is to develop an intelligent control strategy for activated sludge process (ASP). ASP is a complex and nonlinear dynamic system because of the characteristic of wastewater, the change in influent rate, weather conditions, and so on. The mathematical model of ASP also includes uncertainties which are ignored or not considered by process engineer or controller designer. The ASP model based on Matlab/Simulink is designed in this paper. The performance of the model is tested by IWA (International Water Association) and COST (European Cooperation in the filed of Scientific and Technical Research) data that include steady-state results during 14 days. In this paper, fuzzy logic control approach is applied to control the DO (dissolved oxygen) concentration. The fuzzy logic controller that includes two inputs and one output can adjust air flowrate. Also, this paper introduces the remote monitoring and control system that is applied for the CSTR (Continuously Stirred Tank Reactor) wastewater treatment system. The CSTR plant has a local control and the remote monitoring system which is contained communication parts which consist of LAN (Local Area Network) network and CDMA (Code Division Multiple Access) wireless module. Remote control and monitoring systems are constructed in the laboratory.

  • PDF

차세대 MIMO 이동통신에서 적응변조시스템의 성능분석 (Adaptive Modulation and Coding of MIMO in Next Generation Mobile Systems)

  • 강성진;장태원;유영환;황인태;강민구;강창언
    • 인터넷정보학회논문지
    • /
    • 제4권5호
    • /
    • pp.1-9
    • /
    • 2003
  • 본 논문에서는 CDMA 시스템에서 적응 변조 및 부호화 (AMC) 기법의 성능을 향상시키기 위한 방안으로서 기지국과 단말기 간에 개루프 및 폐루프 전송 다이버시티를 적용하였다. 이는 전송 다이버시티를 적용하여 수신 단의 신호 대 잡음비 (SNR)를 개선함으로써, 보다 높은 전송률을 지원하는 변조 및 부호화 레벨이 선택될 확률을 증가시키고 이에 따른 평균 전송률의 이득을 얻고자 하는 것이다. 개루프 전송 다이버시티로는 시공간 블록 부호화 기반 전송 다이버시티 (STTD) 기법을, 폐루프 전송 다이버시티로는 선택적 전송 다이버시티 (STD) 기법을 적용하였다. 모의 실험 결과, AMC 기법과 전송 다이버시티를 결합함으로써 기존 시스템에 비하여 향상된 전송률을 얻을 수 있었다. 단일 경로 레일리 페이딩 채널 환경에서 두 개의 전송 안테나를 사용한 AMC-STTD는 9dB신호 대 잡음비에 대하여 기존의 AMC 기법보다 약 250kbps의 전송률 이득을 보였다. 또한 두 개의 전송 안테나를 사용한 AMC-STD의 경우는 역시 9dB 신호 대 잡음비에서 약 420kbps의 전송률 이득이 얻어짐을 확인하였다.

  • PDF

3G 통신 시스템 응용을 위한 0.31pJ/conv-step의 13비트 100MS/s 0.13um CMOS A/D 변환기 (A 0.31pJ/conv-step 13b 100MS/s 0.13um CMOS ADC for 3G Communication Systems)

  • 이동석;이명환;권이기;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제46권3호
    • /
    • pp.75-85
    • /
    • 2009
  • 본 논문에서는 two-carrier W-CDMA 응용과 같이 고해상도, 저전력 및 소면적을 동시에 요구하는 3G 통신 시스템 응용을 위한 13비트 100MS/s 0.13um CMOS ADC를 제안한다. 제안하는 ADC는 4단 파이프라인 구조를 사용하여 고해상도와 높은 신호처리속도와 함께 전력 소로 및 면적을 최적화하였다. 입력 단 SHA 회로에는 면적 효율성을 가지멸서 고속 고해상도로 동작하는 게이트-부트스트래핑 회로를 적용하여 1.0V의 낮은 전원 전압동작에서도 신호의 왜곡없이 Nyquist 대역 이상의 입력 신호를 샘플링할 수 있도록 하였다. 입력 단 SHA 및 MDAC에는 낮은 임피던스 기반의 캐스코드 주파수 보상 기법을 적용한 2단 증폭기 회로를 사용하여 Miller 주파수 보상 기법에 비해 더욱 적은 전력을 소모하면서도 요구되는 동작 속도 및 안정적인 출력 조건을 만족시키도록 하였으며, flash ADC에 사용된 래치의 경우 비교기의 입력 단으로 전달되는 킥-백 잡음을 줄이기 위해 입력 단과 출력 노드를 클록 버퍼로 분리한 래치 회로를 사용하였다. 한편, 제안하는 시제품 ADC에는 기존의 회로와는 달리 음의 론도 계수를 갖는 3개의 전류만을 사용하는 기준 전류 및 전압 발생기를 온-칩으로 집적하여 잡음을 최소화하면서 시스템 응용에 따라 선택적으로 다른 크기의 기준 전압 값을 외부에서 인가할 수 있도록 하였다. 제안하는 시제품 ADC는 0.13um 1P8M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 13비트 해상도에서 각각 최대 0.70LSB, 1.79LSB의 수준을 보이며, 동적 성능으로는 100MS/s의 동작 속도에서 각각 최대 64.5dB의 SNDR과 78.0dB의 SFDR을 보여준다. 시제품 ADC의 칩 면적은 $1.22mm^2$이며, 1.2V 전원 전압과 100MS/s의 동작 속도에서 42.0mW의 전력을 소모하여 0.31pJ/conv-step의 FOM을 갖는다.

장파장에서 동작하는 Optical Thyristor (Optical thyristor operating at 1.55 μm)

  • 김두근;김형수;정성재;최영완;이석;우덕하;전영민;유병길
    • 한국광학회지
    • /
    • 제13권2호
    • /
    • pp.146-150
    • /
    • 2002
  • 본 연구에서는 광통신 시스템에 응용할 수 있는 장파장용 광 싸이리스터(optcal thyristor)를 제안하고, 소자를 제작하여 그 특성을 측정 분석하였다. 발광과 수광의 기능을 수행하는 광 싸이리스터는 광 네트워크 구성의 핵심 소자로서 충분한 스위칭 전압이 요구되는데, 단일 광 싸이리스터에서 충분한 스위칭 전압 4.03(V)와 홀딩 전압(holding voltage) 1.77(V)를 얻었다. 또한 입력 전류에 따른 수광에 필요한 충분한 광량을 얻을 수 있었고, 입사 광에 따른 비선형 I-V특성의 변화량을 확인 할 수 있었다. 실험적으로 얻어진 장파장용 DOT의 비선형적 특성은 일정한 진폭을 유지 시켜주는 광 하드 리미터(optical hard-limiter), ATM패킷 헤더 프로세싱을 위한 광 ATM 패킷 스위cld, 파장 분할 다중화(WDM) 광전송 시스템에서 파장 라우팅을 위한 파장 변환기 등의 많은 광통신 용용 분야에 적용할 수 있다.

WCDMA 시스템에서 Hybrid Interference Cancellation 기법을 적용한 다중사용자 검파기의 성능분석 (Performance Analysis of the Multi-User Detector Employing a Hybrid Interference Cancellation Scheme in a WCDMA System)

  • 서정욱;오창헌;장은영;조성준
    • 한국정보통신학회논문지
    • /
    • 제6권2호
    • /
    • pp.221-227
    • /
    • 2002
  • 본 논문에서는 3GPP(3rd Generation Partnership Project) 비동기(asynchronous) WCDMA(Wide-band CDMA) 시스템에 HIC(Hybrid Interference Cancellation) 기법의 MUD (Multi-User Detector)를 적용하여 Rayleigh 페이딩 채널에서 BER (Bit Error Rate) 성능을 컴퓨터 시뮬레이션을 통해 구하였다. 이 결과를 감산형 간섭제거기법의 대표적인 방식인 SIC(Successive Interference Cancellation) 기법, PIC(Parallel Interference Cancellation) 기법의 BER(Bit Error Rate) 성능과 비교 분석하였다. 분석한 결과, 전송률이 높은 사용자들은 PIC 기법이나 HIC 기법을 사용하여 간섭을 제거하는 것이 효과적이고, 전송률 이 낮은 사용자들은 SIC 기법이나 HIC 기법을 사용하는 게 효과적이라는 것을 알 수 있었다. 또한, 전송률에 의존하지 않고 모든 사용자의 성능을 고루 만족시키기 위해서는 HIC 구조를 사용하는 것이 효과적이었다. 그 이유로서는 페이딩 채널상의 이유에서 또는 원하는 서비스를 만족시키기 위해서 사용자가 전력을 높일지라도 HIC 기법에서는 전단에 사용하는 SIC에 의해 전력이 낮은 사용자들의 성능을 보장해주고 후단에 사용하는 PIC에 의해 SIC 과정에서 전력이 센 사용자가 받는, 전력이 약한 사용자로부터의 간섭이 효과적으로 제거되기 때문이다.

코드집합 분할 방식의 확장 m-시퀀스 기반 정진폭 멀티코드 대역확산 통신 시스템을 위한 개선된 패리티 검사 기반 수신기에 관한 연구 (A Study on the Improved Parity Check Receiver for the Extended m-sequence Based Multi-code Spread Spectrum System with Code Set Partitioning and Constant Amplitude Precoding)

  • 한준상;김동주;김명진
    • 대한전자공학회논문지TC
    • /
    • 제49권8호
    • /
    • pp.1-11
    • /
    • 2012
  • 직교코드를 다중화하여 데이터 비트열을 확산시켜 전송하는 멀티코드 대역확산 통신 시스템은 고속의 데이터 전송에도 높은 확산이득을 유지할 수 있다는 장점이 있다. 그러나 여러 코드의 합을 더해서 전송하는 송신기의 구조 상 송신기 출력의 진폭 변화가 커서 선형성이 좋은 증폭기가 요구된다는 단점이 있다. 이러한 단점을 극복하기 위하여 Walsh 코드를 확산코드로 사용하고 부호화 하는 방식을 사용하여 송신기 출력의 진폭을 일정하게 만드는 시스템이 제안되었으며, 최근에는 확장 m-시퀀스를 확산코드로 사용하는 정진폭 멀티코드 대역확산 통신 시스템이 제안되어 있다. 이 시스템에서 전체 코드집합을 4개로 분할하여 코드 선택을 하고 부호화하는 방식을 사용하면 송신기의 구조가 간단해지고 수신기에서 복호를 위한 연산량이 크게 감소한다. 코드집합 분할 방식을 적용한 확장 m-시퀀스 기반 시스템에서 정진폭 부호화를 위해 송신기에서 추가로 전송하는 동반 코드를 수신기에서 검출하여 다른 코드와 함께 패리티 검사를 함으로써 코드검출 오류를 보정하여 비트오율 성능을 개선시킬 수 있다. 본 논문에서는 기존에 제안된 패리티 검사 기반 수신기에 비해 비트오율 성능이 우수한 개선된 패리티 검사 기반 수신기 구조를 제안하고, 시뮬레이션을 통하여 성능을 비교 분석하였다.

다이오드 직렬 궤환을 이용한 개별 차수 혼변조 발생기 및 응용 (Individual Order Intermodulation Distortion Generator Using Series Feedback of Diode and Its Application)

  • 손강호;김승환;김일규;김영;윤영철
    • 한국전자파학회논문지
    • /
    • 제19권10호
    • /
    • pp.1096-1103
    • /
    • 2008
  • 본 논문에서는 개별 차수 혼변조 신호 발생기를 이용한 전치 왜곡 선형화기 구조를 제안하였다 혼변조 신호 발생기는 공통 에미터 증폭기의 에미터 단자에 쇼트키 다이오드를 삽입하여, 3차와 5차 혼변조 신호를 다이오드 바이어스 전압에 따라서 발생시킨다. 이렇게 만들어진 혼변조 신호는 다이오드의 직렬 궤환을 이용한 것으로, 다이오드 바이어스 제어에 따라서 혼변조 신호의 크기와 위상을 변화시킬 수 있다. 이러한 혼변조 발생기를 전치 왜곡 선형화기로 사용했을 때, 반송파 2톤 신호 인가 시 3차와 5차 혼변조 신호는 각각 13.5 dB, 0.9 dB의 개선을 보였고, 광 대역폭을 갖는 CDMA IS-95 2FA 신호를 인가하였을 경우, 중심 주파수로부터 ${\pm}0.885$ MHz, ${\pm}1.23$ MHz 떨어진 지점에서 ACLR이 각각 2.3 dB, 2.5 dB의 개선됨을 확인하였다.

차량용 FM 부가 방송 수신 전광판의 구현 (The Implementation of Sign Board Receiving DARC for Vehicle)

  • 김남두;최재석;김영길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.560-565
    • /
    • 2002
  • 본 논문은 FM 부가방송을 수신하여 다양한 정보와 사용자 문구 및 이미지를 전광판에 표시하고 GPS를 탑재하여 위치 기반의 정보를 음성 및 문구로 표시하는 시스템을 구현하였다. 기존의 전광판 시스템이 단순 광고만 반복하거나 다양한 정보를 휴대폰 망을 통해 수신하였지만 FM 부가방송을 수신하여 저렴하게 정보를 사용할 수 있다. 본 시스템은 6부분으로 구성이 되어있다. DARC는 정보의 종류, 뉴스, 증권, 기상, 시간에 따라 분류하고 분류된 데이터는 적당한 표시 시점에 표시된다. GPS는 위치정보와 방향정보 위성 정보를 수집하여 전달하고 이는 주 프로그램에서 연산되어 정보를 표출할 내용과 시점을 계산하게 된다. LED 전광판 제어를 위해 주 프로그램은 2개의 이미지 버퍼를 두고 이미지 엔진을 개발하여 여러 가지 효과 및 내용을 표시할 수 있게 했다. 외부 메모리에는 위치 기반의 정보 파일 출력될 내용의 편성 내용, 출력 방법을 저장하게 하고 이는 FAT 16방식으로 저장된다. 외부 메모리는 데이터 보관 및 시스템에 관계없이 정보를 사용할 수 있게 해준다. USB는 PC와의 통신경로로 사용되고 PC에 프로그램에 의해 본 시스템을 제어할 수 있게 해준다. 음성은 G72l의 음성 압축 방식을 사용하고 이를 소프트웨어적으로 디코딩하여 출력한다. 본 시스템은 차량에 설치되어 DARC에서 수신된 다양한 정보를 표출하고 위치에 따라 음성 및 전광판에 위치 기반 내용이 표시되는 것을 확인할 수 있었다.

  • PDF

결합계수 및 주파수 튜너블 다중대역 내장형 안테나에 관한 연구 (A Study on Coupling Coefficient and Resonant Frquency tunable Multi-band Internal Antenna)

  • 이문우;이상현
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권8호
    • /
    • pp.59-66
    • /
    • 2010
  • 본 논문은 안테나 구조체의 물리적 변화없이 안테나의 단락점에 연결되어있는 인덕터 값에 따라 급전점과 단락점 사이의 결합계수 뿐 아니라 안테나의 공진 주파수를 조절할 수 있는 이동통신용 안테나를 구현하였다. 설계된 안테나는 3중 대역 이상의 주파수 조절이 가능하고 동작 주파수 대역은 GSM(880~960MHz), GPS(1575MHz), DCS(1710~1800MHz), US-PCS(1850~1990MHz), WCDMA(1920~2170MHz) 대역을 포함한다. 제작된 안테나는 반파장 로디드 라인 안테나와 PIFA 구조를 결합한 형태이고 두 개의 단란점과 하나의 급전점을 공유한다. 두 개의 단락점 각각에 인덕터를 추가하여 하나의 인덕터는 급전점과 단락점 사이의 결합계수를 조절하고 다른 하나의 인덕터는 높은 주파수 대역의 공진 주파수를 조절한다. 안테나의 입력 임피던스 조절을 위한 인덕턴스의 범위는 0nH ~ 6.8nH 이고 이득의 변화는 GSM 대역에서는 0.15dBi, GPS 대역에서는 0.73dBi, WCDMA 대역에서는 0.29dBi 이내이다. 또한 공진 주파수 조절을 위한 인덕턴스의 범위는 0nH ~ 4.7nH의 범위에서 1640~2500 MHz (VSWR 3:1 기준)이고 이득의 변화는 GSM 대역에서는 0.46dBi, GPS 대역에서는 0.53dBi, DCS/US-PCS/WCDMA 대역에서는 0.59dBi 이내이다.

한미간(韓美間) 정보통신분야(情報通信分野) 통상마찰예방(通商摩擦豫防)과 해소방안(解消方案)에 관한 연구(硏究) (A study on The U.S.-Korean Trade Friction Prevention and Settlement in the Fields of Information and Telecommunication Industries)

  • 정재영
    • 무역상무연구
    • /
    • 제13권
    • /
    • pp.869-895
    • /
    • 2000
  • The US supports the Information and Communication (IC) industry as a strategic one to wield a complete power over the World Market. However, several other countries are also eager to have the support for the IC industry because the industry produces a high added value and has a significant effect on other industries. Korea is not an exception. Korea recently succeeded in the commercialization of CDMA for the first time in the world, after the successful development of TDX. Hence, it is highly likely to get tracked by the US. Although the IC industry is a specific sector of IT, there is a concern that there might be a trade friction between the US and Korea due to a possible competition. It will be very important to prepare a solution in advance so that Korea could prevent the friction and at the same time increase its share domestically and globally. It will be our important task to solve the problem with the minimum cost if the conflict arises unfortunately in the IT area. The parties that have a strong influence on the US trade policy are the think tank group and the IT-related interest group. Therefore, it would be important to have a close relationship with them. We found some implications by analyzing the case of Japan, which has experienced trade frictions with the US over the long period of time in the high tech industry. In order to get rid of those conflicts with the US, the Japanese did the following things : (1) The Japanese government developed supporting theories and also resorted to international support so that the world could support the Japanese theories. (2) Through continual dialogue with the US business people, the Japanese business people sought after solutions to share profits among the Japanese and the US both in the domestic and in the worldwide markets. They focused on lobbying activities to influence the US public opinion to support the Japanese. The specific implementation plan was first to open culture lobby toward opinion leaders who were leaders about the US opinion. The institution, Japan Society, were formed to deliver a high quality lobbying activities. The second plan is economic lobby. They have established Japanese Economic Institute at Washington. They provide information about Japan regularly or irregularly to the US government, research institution, universities, etc., that are interested in Japan. The main objective behind these activities though is to advertise the validity of Japanese policy. Japanese top executives, practical interest groups on international trade, are trying to justify their position by direct contact with the US policy makers. The third one is political lobby. Japan is very careful about this political lobby. It is doing its best not to give impression that Japan is trying to shape the US policy making. It is collecting a vast amount of information to make a correct judgment on situation. It is not tilted toward one political party or the other, and is rather developing a long-term network of people who understand and support the Japanese policy. The following implications were drawn from the experience of Japan. First, the Korean government should develop a long-term plan and execute it to improve the Korean image perceived by American people. Second, the Korean government should begin public relation activities toward the US elite group. It is inevitable to make an effort to advertise Korea to this elite group because this group leads public opinion in the USA. Third, the Korean government needs the development of a relevant policy to elevate the positive atmosphere for advertising toward the US. For example, we need information about to whom and how to about lobbying activities, personnel network who immediately respond to wrong articles about Korea in the US press, and lastly the most recent data bank of Korean support group inside the USA. Fourth, the Korean government should create an atmosphere to facilitate the advertising toward the US. Examples include provision of incentives in tax on the expenses for the advertising toward the US and provision of rewards to those who significantly contribute to the advertising activities. Fifth, the Korean government should perform the role of a bridge between Korean and the US business people. Sixth, the government should promptly analyze the policy of IT industry, a strategic area, and timely distribute information to industries in Korea. Since the Korean government is the only institution that has formal contact with the US government, it is highly likely to provide information of a high quality. The followings are some implications for business institutions. First, Korean business organization should carefully analyze and observe the business policy and managerial conditions of US companies. It is very important to do so because all the trade frictions arise at the business level. Second, it is also very important that the top management of Korean firms contact the opinion leaders of the US. Third, it is critically needed that Korean business people sent to the USA do their part for PR activities. Fourth, it is very important to advertise to American employees in Korean companies. If we cannot convince our American employees, it would be a lot harder to convince regular American. Therefore, it is very important to make the American employees the support group for Korean ways. Fifth, it should try to get much information as early as possible about the US firms policy in the IT area. It should give an enormous effort on early collection of information because by doing so it has more time to respond. Sixth, it should research on the PR cases of foreign enterprise or non-American companies inside the USA. The research needs to identify the success factors and the failure factors. Finally, the business firm will get more valuable information if it analyzes and responds to, according to each medium.

  • PDF