• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1510-1521
• /
• 1996

This paper presents acquisition algorithm and an improved detection technique for the DS/CDMA (direction sequence code division multiple access) RAKE receiver in multipath fading channel. The DS/CDMA systems use the RAKE receiver, an accurate code acquisition is required for the RAKE branches. The algorithmis able to findthe pseudonoise (PN) code delay estimates for the RAKE branches in a multipath fading channel. In this paper a numerical method and computer simulation simulation have been developed for the acquisition system. The detection probability and mean acquisition time are investigated asa performance measure of the system using the Monte Carlo method. And also in order to analyze the effect of the acquisition on the RAKE receiver this paper bring out the effect of integration time, doppler frequency, processing gain and the number of users on the acquired code phase.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.47-55
• /
• 1994

This paper presents the CDMA system using the RAKE receiver over a multipath fading channel and in multi-user environments. The interference between the propagation paths in a multipath fading causes a serious degradation in the mobile communication environment. In order to derive the path inteference and reduce the fading effect, the RAKE receiver is used. In a computer simulation, the path number of a fading channel and the branch number of the RAKE receiver are modified. As a result, the CDMA system using the RAKE receiver gives a better performance than the conventional CDMA system over a multipath fading channel and in multi-user environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.975-981
• /
• 2012

In this paper, we considered the received signal of the wideband CDMA systems using turbo code in the multipath channel environments, and analyze the performance of the system. This study is to analyze the performance for the variable system bandwidth according to the number of branches of rake receiver by passing the received signal through a rake receiver with a turbo code in Rayleigh fading channel environments. For the design of receiver in wideband CDMA systems, we presented the efficient parameters for the number of iterative decoding and the number of branches of rake receiver.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.158-163
• /
• 2006

In this paper, we considered the received signal of the wideband CDMA systems using turbo code in the multipath channel environments, and analyze the performance of the system. This study is to analyze the performance for the variable system bandwidth according to the number of branches of rake receiver by passing the received signal through a rake receiver with a turbo code in Rayleigh fading channel environments. For the design of receiver in wideband CDMA systems, we presented the efficient parameters for the number of iterative decoding and the number of branches of rake receiver.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.86-96
• /
• 2011

In this paper we propose a Pre-rake system applied with a frequency domain equalizer in TDD/CDMA multi-code transmission. The Pre-rake system has been well known technique in TDD/CDMA to make a receiver simple. However, it still has residual losses of path diversity and signal to noise ratio (SNR). However, gathering all the residual paths demands an additional hardware such as a rake combiner at the receiver. For the reason Pre/Post-rake system has already been proposed at up/downlink correlated channel conditionunder the assumption of noisier channel. There is a trade-off between the first purpose of Pre-rake that makes hardware simple at the receiver and the performance improvement. From the point the frequency domain equalizer (FDE) can be considered in Pre/Post-rake to supply the receiver with the flexible equalizing methods with rather reduced complexity compared with time domain rake combiner or equalizers. Pre-rake itself increases the number of multipath, which results from the convolution of Pre-rake filter and wireless channel, and FDE must be well matched to Pre/Post-rake, while it considers the relationship of hardware complexity and the performance. In this paper, the Pre-rake/Post-FDE system is introduced at TDD/CDMA multi-code transmission. In addition, the cyclic prefix reduction method in the proposed system is introduced, and the theoretical analysis to the proposed system is given by assuming Gaussian approximation, and finally the numerical simulation results are provided.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.591-594
• /
• 2001

In the W-CDMA system, cell search is one of the imporant functions of the mobile station searching for a cell and achieving spreading code and time synchronization to its downlink scrembling code. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. Channels for cell search are Primary Synchronization Channel (P-SCH), Secondary Synchronization Channel(S-SCH), and Common Pilot Channel (CPICH). In this paper, cell search is analyzed based on simulation. Rake receiver provides improvement of Performance as an increase of bandwidth because there are more available multipaths. In this paper, the performance of W-CDMA system employing RAKE receiver is evaluated by computer simulation over the types of ITU_R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is improved by the increase of multipath components in equal level of the received power.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.183-189
• /
• 2004

In this paper, the Eigen-RAKE receiver in wideband direct sequence code-division multiple access(DS-CDMA) systems with downlink smart antenna is analyzed for different spreading bandwidths(1.25 MHz, 5 MHz, 10 MHz) and different channel environments(macro, micro). The realistic spatio-temporal wideband multipath channel is assumed, one of which is standardized multiple-input single-output(MISO) radio channel model for WCDMA link-level simulations proposed by $3^{rd}$ generation partnership project(3GPP) contributions. We assumed spatial scattering phenomenon in which many unresolvable path signals within a limited range of spatial angle simultaneously contribute to the signals received at the receiver. Several multipaths within one chip are distinguished into each one and the first multipath components are selected as the desired signal and the others are considered self-interference. Downlink DS-CDMA system with eigenbeamformer using wider bandwidth present better performance than that using narrow bandwidth system by employing Eigen-RAKE receiver of many number of branches. It is shown that the downlink eigenbeamformer is more effective in typical urban macro cellular environments when using Eigen-RAKE receiver.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.97-100
• /
• 2001

The performance of mobile radio communication system is dependent on various factors such as channel environment. Especially, the number of multipath components of mobile radio channel and multipath delay property in CDMA system for different bandwidths are changed. Therefore, using multipath components, Rake receiver provides improvement of performance of W-CDMA system is evaluated by computer simulation over the types of ITU-R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is Improved by the increase of multipath components in equal level of the received power.