• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2000

In this paper, organic dispersion type back light EL(Electroluminescent) devices were manufactured using Ethyl hydroxy ethyl cellulose as organic binder, ZnS:Cu as phosphor powder and $BaTiO_3$ as dielectrics by screen printing method, which are focused on as a new light source. The properties of the fabricated organic dispersion type back light EL devices were showed $1.98[mA/\m^2]$ of current density, 0.075[W] of power consumption, 7.1[nF] of capacitance at $25[^{\circ}C]$, 100[V], 400[Hz], respectively. Also brightness of the fabricated device was revealed $20~110[cd/\m^2]$ at 50~150[V] and the change of color was shoed bluish green of x=0.1711, y=0.3676 which are color coordinate by CIE.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.499-508
• /
• 2000

The purposes of this study were to evaluate the validity of 2 kinds of digital radiography techniques in evaluating the radiopacity comparison of restorative materials and to determine the relative radiopacities of several kinds of compomer and flow able resin using these techniques. After taking radiographs of an aluminum step wedge, con-elation of optical density calibration curves were evaluated between conventional radiography with transmission densitometer and CD-Dent digital radiography (storage phosphor system) and between conventional one and RVG$^{(R)}$ digital radiography (CCD system). Compomers such as Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Dyract flow$^{(R)}$, and flowable resins such as Ultraseal-XT$^{(R)}$ plus$^{TM}$, Revolution$^{TM}$, Aeliteflo$^{TM}$ and Tetric-flow$^{(R)}$ were used. Five specimens of 5mm in diameter and 2 mm thick were fabricated with each material. Radiopacities of the materials were measured using the above radiographic techniques and compared. The results were as follows: 1. When the optical density calibration curves were compared, conventional radiography and both CD-Dent and RVG$^{(R)}$ digital radiographies showed very high inverse correlations (${\gamma}$=-0.95, ${\gamma}$=-0.98 ; p<0.05). 2. All the tested restorative materials showed levels of radiopacity the same as or greater than that of dentin (p<0.05), Radiopacities of Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Tetric flow$^{(R)}$ were greater than those of Revolution$^{TM}$, Aeliteflo$^{TM}$, or dentin (p<0.05). 3. Radiopacities of Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Tetric flow$^{(R)}$ were shown to be greater than that of enamel when conventional radiography and CD-Dent digital radiography were used (p<0.05). Radiopacity of Dyract flow$^{(R)}$ was shown to be greater than that of Enamel when conventional radiography was used (p<0.05).

• Clinical and Experimental Pediatrics
• /
• v.53 no.11
• /
• pp.957-964
• /
• 2010

Purpose: Our study attempted to determine the prognostic significance of minimal residual disease (MRD) detected by a simplified flow cytometric assay during induction chemotherapy in children with B-cell acute lymphoblastic leukemia (B-ALL). Methods: A total of 98 patients were newly diagnosed with precursor B-ALL from June 2004 to December 2008 at the Asan Medical Center (Seoul, Korea). Of those, 37 were eligible for flow cytometric MRD study analysis on day 14 of their induction treatment. The flow cytometric MRD assay was based on the expression intensity of CD19/CD10/CD34 or aberrant expression of myeloid antigens by bone marrow nucleated cells. Results: Thirty-five patients (94.6%) had CD19-positive leukemic cells that also expressed CD10 and/or CD34, and 18 (48.6%) had leukemic cells with aberrant expression of myeloid antigens. Seven patients with ${\geq}1%$ leukemic cells on day 14 had a significantly lower relapse-free survival (RFS) compared to the 30 patients with lower levels (42.9 % [18.7%] vs. 92.0% [5.4%], $P$=0.004). Stratification into 3 MRD groups (${\geq}1%$, 0.1-1%, and <0.1%) also showed a statistically significant difference in RFS (42.9% [18.7%] vs. 86.9% [8.7%] vs. 100%, $P$=0.013). However, the MRD status had no significant influence on overall survival. Multivariate analysis demonstrated that the MRD level on day 14 was an independent prognostic factor with borderline significance. Conclusion: An MRD assay using simplified flow cytometry during induction chemotherapy may help to identify patients with B-ALL who have an excellent outcome and patients who are at higher risk for relapse.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.424-431
• /
• 1996

This study was carried out to provide information for establishing counter measures of soil pollution through analysis of Cd. Cu, Pb, and Zn in paddy soils and brown rice. Cadmium, Cu, Pb, and Zn contents in soils were analyzed and distribution maps for these heavy metals were prepared. Heavy metal contents in brown rice were also measured. Average contents of Cd, Cu, Pb, and Zn in surface paddy soils extracted with 0.1 N HCl were 7.4, 35.8, 98.9, and $118.8mg\;kg^{-1}$, respectively. These were 9 times (Cu) to 50 times (Cd) higher than the background level of heavy metals in unpolluted paddy soils in Korea. The contents of Pb and Zn were lower than those measured in 1980, whereas Cd content did not decrease. The levels of heavy metal contamination in paddy soils may not affect growth or yield of rice plant, however, Cd contents indicated a level of serious concern to humans. The average contents of Cd, Cu, Pb, and Zn in brown rice were 0.38, 2.38, 1.31 and $22.31mg\;kg^{-1}$, respectively.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.98-105
• /
• 1997

The study on the cytotoxicity of heavy metals was carried out to evaluate the cytotoxic effect of those on mouse L929 fibroblast cell in 96-well microtiter plates. The cytotoxicity was assayed by the neutral red, tetrazolium MTT, total protein, micronuclei test. The cytotoxicity of the heavy metals by neutral red and tetrazolium MTT was showed in order, cadmium > zinc > nickel for the cationic metals tested. The effect of metal-metal interaction on the cytotoxicity showed a marked reduction of cadmium toxicity by zinc, to a lesser degree, by nickel. The amount of total protein in treated group added heavy metals was less than that of the control and treated cadmium alone was less than those of combination with nickel or zinc. At midpoint cytotoxicity values of heavy metals, the frequency of micronuclei on the cell treated heavy metals was more than that of control and treated cadmium alone was more than those of combination with nickel or zinc. From those results, it could be suggested that the heavy metals decreased the viability of mouse fibroblast L929 cells in a concentration-dependent manner and have cytogenic toxic effects, but mixed group decreased the cytotoxic and cytogenic toxicity on L929 cells.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.87-98
• /
• 2004

Tailings and contaminated soils from Cheongyang mine and Seobo mine have been analysed by ICP-AES from 5-step sequential extraction method of multielement determination on extraction solutions at each step. As and Co within tailings and contaminated soils from Cheongyang mine and Seobo mine are mainly in the residual phase. In case of Cd, Cu and Zn, the most dominant fraction for tailings of Cheongyang mine is the oxidizable phase, while tailings of Seobo mine is dominated by the residual phase. In contaminated soils from Seobo mine, the predominant fraction for Cd, Cu and Zn is the Fe-Mn oxide phase. The exchangeable fraction of Pb in tailings from Cheongyang mine and Seobo mine is relatively high compared with those of other metals; whereas Pb fraction in contaminated soils from Seobo mine is largely associated with the residual fraction.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.328-331
• /
• 2003

1) PM10의 질량농도는 평균 98.21 ${\mu}g$/$m^3$로 나타났으며, 최고농도는 330.56 ${\mu}g$/$m^3$로서 연간 기준치인 80 ${\mu}g$/$m^3$를 초과하였다. 또한 K(1.23 ${\mu}g$/$m^3$)>Ca(1.12 ${\mu}g$/$m^3$)>Na(0.79 ${\mu}g$/$m^3$)>Al(0.76 )>Fe(0.75 ${\mu}g$/$m^3$) 순으로서 높은 조성을 보였으며, Cd(2.72 ng/$m^3$)이 가장 낮은 질량 농도를 보였다. 2) Cd, Ni, Pb 및 Zn은 평균 지각농축계수가 10이상의 인위적인 기원으로 봄철과 여름철에 비하여 서풍계열의 바람이 우세한 겨울철에 매우 높은 값을 보였으며, 연구 지역의 서쪽에 인접한 사상공단과 서남쪽에 위치한 신평.장림공단으로부터 서풍계열의 바람을 타고 이동되었음을 알 수 있었다. 또한 이들 중금속은 조대입자보다는 미세입자의 조성에 많은 영향을 미치는 것으로 나타났으며, 평균 토양입자의 기여율은 9.5%로 나타났다. 3) PM10의 조성에 관여하는 금속 원소들은 토양, 해양 및 인위적인 오염물질에 의한 기원을 동시에 포함하고 있으나 해양기원보다는 토양 및 인위적인 기원들 간의 상관성이 우세하게 나타났다.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Carbon letters
• /
• v.4 no.1
• /
• pp.14-20
• /
• 2003

Based on the previous results of the equilibrium and batch adsorptions, the removal efficiency of the two-step surface-modified activated carbon ($2^{nd}AC$) for heavy metal ions such as Pb, Cd, and Cr in fixed column was evaluated by comparing with that of the as-received activated carbon (AC) and the first surface-modified activated carbon ($1^{st}AC$). The order of metal removal efficiency was found as $2^{nd}AC$ > $1^{st}AC$ $\gg$ AC, and the efficiency of the $2^{nd}AC$ maintained over 98% from the each metal solution. Increase of the removal efficiency by the second surface modification was contributed to maintain favorable pH condition of bulk solution during adsorption process. The removal of the heavy metals on the $2^{nd}AC$ was selective with Pb being removed in preference to Cr and Cd in multicomponent solutions and slightly influenced by phenol as the organic material.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2023

The dye wastewater discharge from the textile industries mainly affects the aquatic environment. Hence, the treatment of this wastewater is essential for a pollutant-free environment. The purpose of this research is to optimize the dye removal efficiency for process influencing independent variables such as pH, electrolysis time (ET), and current density (CD) by using Box-Behnken design (BBD) optimization and Genetic Algorithm (GA) modelling. The electrocoagulation treatment technique was used to treat the synthetically prepared Reactive Black dye solution under batch mode potentiometric operations. The percentage of error for the BBD optimization was significantly greater than for the GA modelling results. The optimum factors determined by GA modelling were CD-59.11 mA/cm², ET-24.17 minutes, and pH-8.4. At this moment, the experimental and predicted dye removal efficiencies were found to be 96.25% and 98.26%, respectively. The most and least predominant factors found by the beta coefficient were ET and pH respectively. The outcome of this research shows GA modeling is a better tool for predicting dye removal efficiencies as well as process influencing factors.