• Korean Journal of Environmental Agriculture
• /
• v.35 no.2
• /
• pp.152-157
• /
• 2016

BACKGROUND: Since bottom ash (BA) contains considerable amounts of CaO and MgO, it could be a useful amendment to increase soil pH and to immobilize cadmium (Cd). This study was conducted to evaluate effect of BA application in reducing Cd phytoavailability.METHODS AND RESULTS: Bottom ash was applied at the rate of 0, 20, 40, and 80 Mg/ha to Cd contaminated soil, and then lettuce was cultivated under field condition. soil pH and net negative charge increased slightly with increasing BA application; however, there was no statistical difference among the rates. Water soluble, exchangeable+acidic, reducible, and oxidizable fraction of Cd decreased with increasing bottom ash application rate, whereas residual fraction of Cd increased with increasing bottom ash application rate. Lettuce yield increased with rate of bottom ash up to 40 kg/ha. Visual evidences of cadmium toxicity and growth inhibition were not found during lettuce cultivation.CONCLUSION: Bottom ash was effective to reduce phytoextractability of Cd and to increase lettuce yield. Conclusively, BA could be a good soil amendment to reduce Cd phytoavailability in contaminated arable soil.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.357-364
• /
• 2007

This research is to set a direction on the recycle of Discarded Automotive tires reforming them into heavy metal adsorbents by developing a particular functional group inducing formation of Chelate complexes with heavy metal ion in the water, on the surface of the used tire conventionally turned into powdered form. For this purpose, through FT-IR, XRD, XRF, SEM, elution test we confirmed and analyzed the property of newly reformed scrapped tires, and functional group. Also, by Kinetics Study we produced an invariable value applying to absorption models. Conclusively the absorption preference of heavy metal is determined to be $Pb^{2+}>Cu^{2+}>Cd^{2+}$, and it reached absorption balance within first 30 minutes, also the absorption reaction time increased from 0.27 to $1.78\sim3.15(g/mg{\cdot}min)$, and showed more than 80% of removal efficiency. This result proved that the efficiency increased by 10 times compared with the conventional powdered Discarded Automotive tires, and the Discarded Automotive tire which implemented the Functional group can exhibit a great efficiency as heavy metal adsorbent.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.17-35
• /
• 2001

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single adsorption of lead, copper, zinc and cadmium on natural clays. As a result, it was found that in a single adsorption of lead and copper, about 50% of adsorption was occluded in carbonate phase, and in case of cadmium, about 80% of adsorption was occluded in exchangeable phase. At temperature below $25^{\circ}C$ about 60% of zinc was occluded in exchangeable phase but above $40^{\circ}C$ about 50% of zinc was occluded in carbonate phase. The effect of temperature on each occluded phase was largely observed in Fe-oxide, Mn-oxide and organic occluded phases. Besides, the adsorption of metals on natural clays was an endothermic reaction with the exception of exchangeable phase adsorption.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.1-8
• /
• 2014

For this study, a 160Ah Ni-MH battery is produced with parallel arranged two 80Ah Ni-MH batteries as an unit, in order to start diesel generator(engine) in place of Lead Acid battery or Ni-cd battery which contain indicated toxic pollutant of Environmental pollution, by high capacity Ni-MH battery. And the ternary electrolyte recipe is requested to develop proper electrodes of the 160Ah Ni-MH battery, and then the 160Ah battery can be tested at high rate discharging performance. Zn is added to negative electrode for the improvement of performance. 160Ah Ni-MH battery has been tested in various experiments for diesel engine starting. As the result, diesel engine starting is found successfully.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.31-36
• /
• 1999

The $Mg._5Zn._5SiN_2:Tb$ and $Mg._5Zn._5SiN_2:Eu$ materials were synthesized and studied to develop new phosphors for thin-film electroluminescent device application. Photoluminescence and cathodoluminescence characteristics of the synthesized phosphors were similar to general emission spectra of Eu, Tb ion, respectively. The CIE color coordinates, threshold voltage and luminance of the $Mg._8Zn._2SiN_2:Eu$ thin-film electroluminescent device fabricated by electron-beam deposition system were x=0.47, y=0.46, 47V, and 23.5 cd/$cm^2$ at 80V, respectively. The capacitance-voltage and charge-voltage characteristics of the thin film electroluminescent devices were also measured.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.45-56
• /
• 2008

This study was carried out to determine the effects of mineral composition and grain size of zeolite and bentonite from Po-hang and Kyung-ju, South Korea on the adsorption of heavy metals. Zeolite specimen consists mainly of mordenite, clinoptilolite, heulandite etc. And bentonite specimen is mainly composed of montmorillonite. Five heavy metals, Cd, Cr, Cu, Mn, and Pb were used to conduct the relevant adsorption experiments with the fixed concentrations of 10 ppm and 20 ppm, respectively. Host specimens excluding specimen for Cr resulted in the adsorption rate over average 80 percent, and over 95 percent for Pb. This study indicates that zeolite is more efficient in the adsorption of the heavy metals than bentonite, and its adsorption rate tends to decrease with increasing concentration of the heavy metals.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.305-309
• /
• 1992

Cytosine deaminase (EC 3.5.4.1) from BaciNus stc~urorhermophilus was partially purified 7.2-fold with an overall yield of 52.7%. The partially purified enzyme deiiminated cytosine only.but not 5-methylcytosine and 5-fluorocytosine. The apparent Michaclis constant. Km valuefor cytosine was 5.9 mM. The enzyme was relatively stable in the range of pH 4.0 to 7.0.furthermore extremely thermo-stable : more than 75'X) of the activity was remained afterheating at 80$^{\circ}$C for I0 min at pH 6.5. The enzyme had a pH optimum at around pH7.0 to 7.5. and temperature optimum at 35 to 31$^{\circ}$C. And the activation energ (En value)determined from an Arrhenius plot was 26 Kcal/mol. The enzyme activity was stronglyinhibited by heavy metal ions such as Cd", Hg". Cut' at 1 mM, anJ by o-phenanthroline,and p-chloromcrcuribcnzoate at I mM. But the enrymc activity was activatetl increased byGMP, and CMP at 1 mM.ased by GMP, and CMP at 1 mM.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.663-668
• /
• 2002

Cation exchange capacity of clay, white clay and zeolite was estimated by performing the powder adsorption test for 6 different heavy metal (Cd, Cr, Cu, Fe, Pb and Zn) standard solutions whose concentrations were varied by 5,10,15 and 20 ppm. The adsorption rate of heavy metals decreased with increasing the concentration of standard heavy metal solutions. The adsorption rate of the clay and the white clay showed more than 80% for the all tested heavy metals except Cr and especially above 99% for the Fe and the Pb. The Cr adsorption rate of the mixture of the clay and the white clay increased, however, that of Zn decreased. The adsorption rate of Cr and Zn showed relatively lower values as compared with those of the other heavy metals because the cation exchange H$\^$+/ ions and heavy metal ions of the clay or the white clay were in competition at low pH region.

• Solar Energy
• /
• v.20 no.2
• /
• pp.55-65
• /
• 2000

Better electrical and optical properties of ITO thin films were demanded for the window layer of CdS/CdTe solar cells. To match that demand, an ion beam sputtering system was used for the deposition of ITO thin films. The substrate temperature and ion beam energy were controlled to deposit high quality ITO thin films in two cases of Ar ion sputtering and Ar+$O_2$ ion sputtering. The microstructure changed from domain structure in ITO deposited by Ar ions to grain structure in ITO deposited by Ar+$O_2$ ions. The lowest resistivity of ITO films was $1.5\times10^{-4}{\Omega}cm$ at $100^{\circ}C$ substrate temperature in case of Ar ions sputtering. Transmittance in the visible range was over 80% above $100^{\circ}C$ substrate temperature.