• 한국재료학회지
• /
• 제32권7호
• /
• pp.320-325
• /
• 2022

Single OLED and tandem OLED was manufactured to analyze the electroluminescence characteristics of DC driving, AC driving, and full-wave rectification driving. The threshold voltage of OLED was the highest in DC driving, and the lowest in full-wave rectification driving due to an improvement of current injection characteristics. The luminance at a driving voltage lower than 10.5 V (8,534 cd/m²) of single OLED and 20 V (7,377 cd/m²) of a tandem OLED showed that the full-wave rectification drive is higher than that of DC drive. The luminous efficiency of OLED is higher in full-wave rectification driving than in DC driving at low voltage, but decrease at high voltage. The full-wave rectification power source may obtain higher current density, higher luminance, and higher current efficiency than the AC power source. In addition, it was confirmed that the characteristics of AC driving and full-wave rectification driving can be predicted from DC driving characteristics by comparing the measured values and calculated values of AC driving and full-wave rectification driving emission characteristics. From the above results, it can be seen that OLED lighting with improved electroluminescence characteristics compared to DC driving is possible using full-wave rectification driving and tandem OLED.

• 청정기술
• /
• 제26권4호
• /
• pp.311-320
• /
• 2020

본 연구에서는 단순 침전법으로 제조한 CdS 및 CdZnS/ZnO 광촉매를 이용하여 가시광선하에서 로다민 B, 메틸 오렌지 및 메틸렌 블루 등에 대한 광분해 반응 연구를 수행하였다. 특히 염료와 광촉매의 물리화학적 성질이 전체 광촉매 반응의 반응 경로에 미치는 영향에 대해 중점을 두고 검토하였다. X선 회절분석법, UV-vis 확산반사 분광법 그리고 X선 광전자 분광분석법 등을 이용하여 제조된 촉매들의 물리화학적 특성을 분석하였다. CdS 및 CdZnS/ZnO 광촉매 모두 자외선뿐만 아니라 가시광선 영역에 있어서도 우수한 광흡수 특성을 나타내었다. 메틸 오렌지의 경우에는 CdS 및 CdZnS/ZnO 각각의 광촉매 상에서 동일한 반응기구를 통해 반응이 진행되는 반면, 로다민 B 및 메틸렌 블루는 각각의 광촉매 상에서 서로 다른 반응 경로를 통해 광분해 반응이 진행되는 것으로 나타났다. 특히 메틸렌 블루의 광분해 반응을 보면, CdZnS/ZnO 광촉매 상에서는 주로 단일분자 형태로 전체 반응이 진행되지만, CdS 상에서는 반응 초기부터 이량체를 형성하였다. 이와 같은 결과들은 CdS 및 CdZnS/ZnO 각각의 반도체 광촉매들의 전도대의 띠끝 전위 차이와 염료들의 흡착 특성 차이에 기인한 것으로 판단된다.

• 폴리머
• /
• 제30권3호
• /
• pp.266-270
• /
• 2006

Poly [(dimethylmethylvinyl)siloxane 공중합체(PMViS)를 phosphorus oxychloride $(POCl_3)$와 반응시켜 poly [(dimethylmethylvinyl) siloxane] phosphine oxides (PMViSPO)를 제조하였다. Cadmium selenide (CdSe)는 cadmium oxide(CdO), tetradecylphosphonic acid(TDPA), trioctylphosphine oxide(TOPO)를 $300^{\circ}C$에서 반응시키고 여기에 Se를 용해시킨 tributylphosphine(TBP)과 trioctylphosphine(TOP)을 가한 다음 $320^{\circ}C$에서 반응시켜 제조하였다. 또한 CdSe 제조 용액에 PMViSPO를 가하여 CdSe-SPO adduct를 제조하였다. 백금 촉매 존재 하에서 $\alpha,\omega-vinyl$ poly(dimethylsiloxane) (VPMS), HPMS, CdSe 또는 CdSe-SPO를 고속 교반기에 취하고 컴파운딩하여 CdSe 함유 액상실리콘 고무 composite (LSRC-1)와 CdSe-SPO 함유 LSR composite (LSRC-2)를 제조하였다. 제조한 LSR composites 내에 함유된 형광 물질인 CdSe nanoparticles의 분산형태를 측정하여 입자 크기가 $30\sim50nm$인 입자가 균일하게 분포되어 있음을 확인하였고 LSRC-2의 분산도가 LSRC-1보다 우수함을 확인하였다. 또한 CdSe 입자의 개수를 측정한 결과 동일한 면적에 대하여 166개와 202개로 보다 많은 개수의 CdSe가 LSRC-2에 함유됨을 알 수 있었다. LSR composites의 열적 특성을 측정한 결과 CdSe-SPO가 함유된 LSRC-2의 열안정성이 높게 나타났다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.317-320
• /
• 2000

This paper proposes a voltage compensation method to improve the control performance of B4 inverter which is studied for low-cost drive systems. The B4 inverter employs only four switches and it has a center-tapped connection in the split dc-link capacitors to one phase of a three-phase motor. In the B4 topology unbalan-cd three-phase voltages will be generated by the dc link voltage ripple. To solve this problem we present a voltage compensation method which adjusts switching times considering dc link voltage ripple. The proposed method is verified by simulation results,

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1001-1004
• /
• 2008

An advanced backplane circuit technology for AMOLED using amorphous silicon TFTs with commercial level reliability, uniformity and lifetime was recently integrated into a prototype device. Differential aging of T98>100 hrs at 200 cd/m2 brightness and >10,000hrs lifetime is demonstrated. A 2.2" QVGA ($240{\times}320$) prototype has been developed and shown having the above-mentioned high performance.

• 생태와환경
• /
• 제38권3호통권113호
• /
• pp.334-340
• /
• 2005

The chemical forms of Cd, Cu, Pb, and Zn were analysed by sequential extraction technique to evaluate the effects of drying and heating of dredged sediments from Lake Chungcho. The most abundant fraction of Cd, Cu, and Zn in the wet and untreated sediment was organic/sulfidic fraction that is state in reducing environment such as the bottom condition of Lake Chungcho, while Pb dominated in residual fraction. This means that the source of Cd, Cu, and Zn in the Chungcho lake sediment is related to the organic degradation and Pb to the erosion from surrounding rocks. With drying and oxidation by dredging, heating treatment, and disposal of the lake sediment, the chemical forms of studied metals changed greatly from organic/sulfidic fraction to adsorbed and reducible fractions which are more labile in oxygenated environment. Organic/sulfidic fraction of Cd, Cu and Pb in the wet sediment was transformed with drying and heating treatments to the labile ones like adsorbed and reducible fraction, but Zn to carbonate and reducible fraction. Heating of the sediment at $320^{\circ}C$ greatly increased the labile fraction of Cd and Cu, while that at $105^{\circ}C$ for Pb and Zn. It is believed that the increase in labile forms of heavy metals in the sediments by drying and heating is caused by the contact with oxygen during drying and heating and by the increase of pH of the pore water at the expense of organic/sulfidic fraction. It is concluded that the drying and oxidation currently used in the treatment of dredged sediment can increase labile forms of heavy metals in the sediment, and the potential of the metal availability from the sediment.

• 한국동물학회지
• /
• 제23권3호
• /
• pp.137-148
• /
• 1980

토끼 골격근 小胞體의 ATPase 活性에 미치는 $Hg^{2+}, Cu^{2+}, Pb^{2+}, Cd^{2+}, Mn^{2+}$ 등 2價 陽이온을 영향을 비교 측정하였다. 이들 陽이온은 $Mn^{2+}$을 제외하고 모두 이 酵素의 活性을 阻害하였다. $Mn^{2+}$은 低濃度 (12.5-100 $\mu$M)에서는 오히여 活性을 증가시켰고, 그 보다 高濃度에서는 극히 약하게 阻害하였다. $Mn^{2+}$을 제외한 위의 2價 陽이온들의 阻害龍은 $Hg^2$가 가장 컸고 (阻害係數 Ki = 10$\mu$M), rm 다음이 $Cu^{2+}$ (Ki = 30$\mu$M), $Pb^{2+}$ (Ki = 120$\mu$M), $Cd^{2+}$ (Ki = 320$\mu$M)의 순이었다. 위의 4종의 陽이온들의 ATPase에 대한 阻害作用을 可逆的 非競爭的 阻害로 판정되었다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제25권4호
• /
• pp.312-320
• /
• 2022

Purpose: Screening serologic tests are important tools for the diagnosis of celiac disease (CD). Immunoglobulin (Ig)G anti-deamidated gliadin peptide (anti-DGP) is a relatively new autoantibody thought to have good diagnostic accuracy, comparable to that of anti-tissue transglutaminase (anti-tTG) antibody. Methods: Pediatric patients (n=86) with a clinical suspicion of CD were included. Duodenal biopsy, anti-tTG, and IgG anti-DGP antibody tests were performed. The patients were divided into CD and control groups based on the pathological evaluation of duodenal biopsies. The diagnostic accuracy of serological tests was determined. Results: IgA anti-tTG and IgG anti-DGP antibodies were positive in 86.3% and 95.4% of patients, respectively. The sensitivity, specificity, and diagnostic accuracy of the IgA anti-tTG test were 86.3%, 50.0%, and 68.6%, respectively, and those of the IgG anti-DGP test were 95.4%, 85.7%, and 90.7%, respectively. The area under the receiver operating characteristic (ROC) curve was 0.84 (95% confidence interval [CI], 0.74-0.91) for IgA anti-tTG test and 0.93 (95% CI, 0.86-0.97) for IgG anti-DGP test. The comparison of IgA anti-tTG and IgG anti-DGP ROC curves showed a higher sensitivity and specificity of the IgG anti-DGP test. Conclusion: IgG anti-DGP is a reliable serological test for CD diagnosis in children. High tTG and DGP titers in the serum are suggestive of severe duodenal atrophy. The combined use of IgA anti-tTG and IgG anti-DGP tests for the initial screening of CD can improve diagnostic sensitivity.

• 한국광학회지
• /
• 제15권5호
• /
• pp.423-428
• /
• 2004

320${\times}$240 배열의 중적외선 대역(3.7 $\mu\textrm{m}$∼4.8 $\mu\textrm{m}$) MCT(HgCdTe) 검출기를 이용하여 분해능과 신뢰도가 대폭 향상된 소형$.$고성능의 적외선 열상센서를 설계, 제작하였다. 개발된 열상센서는 1∼20배의 고배율 줌 광학계로 설계하고 미세주사 기법을 적용하여 640${\times}$480의 화소를 재현하여 항공기의 항법 보조로부터 표적획득에 이르기까지 다양한 활용이 가능하다. 적용된 적외선 줌 광학계는 릴레이 형태의 재결상계로 설계되었으며 미세주사 장치의 개발로 7.6 cycles/mrad 까지 분해가 가능하며 최저배율에서 40$^{\circ}$${\times}$30$^{\circ}$의 초광각(super wide field of view)의 시계를 갖는다. 또한 불균일 보정기법과 히스토그램 가변방식의 결합을 통한 첨단 열 영상처리 기법을 제안하여 열상센서에 적용함으로써 고성능의 실시간 디지털 영상처리를 가능케 하였다. 본 신호처리기의 개발을 통해 획득된 열영상의 최소분해가능 온도차는 고배율에서 0.05K(＠1cycles/mrad) 이하의 우수한 결과를 보였다.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.121-125
• /
• 2015

We studied the blue fluorescent OLED with Mg:Ag, Al, Ni as anode materials. Blue fluorescent OLEDs were fabricated using Anode / $MoO_3$ (3 nm) / 2-TNATA (60 nm) / NPB (30 nm) / SH-1 : BD-2 (5 vol.%, 30 nm) / Bphen (40 nm) / Liq (1 nm) / Al (150 nm). Current density of OLED with Mg:Ag was not measured due to too low work function, and that of OLED with Al showed $45.2mA/cm^2$ at 12 V. Luminance and Current efficiency of OLED with Al showed $385.1cd/m^2$ and 0.9 cd/A. Current density of OLED with Ni of 8, 10, 12 nm thickness showed 10, 12.9, $37.2mA/cm^2$, respectively. Luminance and Current efficiency of OLED with Ni of 8, 10, 12 nm thickness showed 670.9, 991.2, $1,320cd/m^2$ and 6.7, 7.7, 3.6 cd/A, respectively. Transmittance of Al was 52.2% at 476 nm wavelength and that of Ni of 8, 10, 12 nm thickness was 79, 77, 74 %, respectively. In spite of best current density, OLED with Al showed the lowest luminance and current efficiency because of low work function and poor transmittance. When thickness of Ni was increased to 12nm, current efficiency was sharply lower owing to bad transmittance and unbalance of holes and electrons. Finally, OLED with Ni of 10 nm thicknes showed the highest current efficiency.