• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.184-189
• /
• 2010

Organic light-emitting diodes (OLEDs) with single emissive layer structures using two fluorescent dopants were fabricated and the device was composed of ITO / NPB ($700{\AA}$) / MADN : C545T - 1.0% : DCJTB - 0.3% ($300{\AA}$) / Bphen ($300{\AA}$) / LiF ($10{\AA}$) /Al ($1,000{\AA}$). C545T and DCJTB were functioned as green fluorescent dye and red fluorescent dye under MADN as host material. Concentrations of C545T and DCJTB was changed in emissive layer of MADN. Optimized OLED device using two fluorescence dopants shows emission efficiency of 8.42 cd/A and luminescence of 3169 cd/$m^2$at 6 V with CIE color coordinate, (0.43, 0.50). Electroluminescence of optimized OLED showed two peak at 500 and 564 nm according to C545T and DCJTB. These results indicate that F$\ddot{o}$ster energy transfer energy transfer was from MADN to C545T and rather than to DCJTB continuously.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.2
• /
• pp.93-105
• /
• 2001

BACKGROUND : Changiga is a hetnal medicine which has been used of the traditional therapeutic agent of asthma. So I examine the effect of Changija on immune Cell&serum OA-specific IgE in BALF in rat asthma model. MATERIAL and METHODS : Rats were sensitized with OA; at day 1 sensitized group and Changiga(CIG) groups were systemically immunized by subcutaneous ingection of 1mg OA and 300mg of Al(OH)3 in a total volume of 2ml. At the same time, 1ml of 0.9% saline containing $6{\times}109$ B. pertussis bacilli was injected by i.p. 14 days, after the systemic immunization, rats received local immunization by inhaling 0.9% saline aerocol containing 2%(wt/vol) OA, A day after local immunization, BAL fluid was collected from the rats. A day after local immunization, rats were orally administered with Changiga extract 14 days, Lymphocyte, CD4+ T-cell CD8+ T-cell counts, CD4+/CD8+ ratio in BALF, change of serum OA-specific IgE level in the peripheral blood were measured and evaluated. RESULT : Changiga showed a suppressive effect on a rat asthme model. Changiga decreased lymphocyte, CD4+ T-cell, CD4+/CD8+ ratio in BALF, serum OA-specific IgE level as compared with the control group, whereas Changiga decreased CD8+ T-cell in BALF with statistical nonsignificance as compared with the control group. CONCLUSION: This study shows that Changiga have a suppressive effect on rat allergic athma model. Changiga would be useful allergic asthma treatment agent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.398-398
• /
• 2011

CIGS/CdS/i-ZnO의 hetero junction으로 구성된 CIGS 태양전지는 적색광 광전류-전압 곡선특성이 백색광 곡선에 비해 크게 왜곡된다. 이는 CdS층의 광흡수에 따른 광전도도의 변화가 pn junction의 에너지밴드구조를 변화시키기 때문으로 알려져 있고, 그 정도는 CdS의 deep level acceptor 트랩의 존재와 같은 CdS 박막의 특성과 밀접한 관련이 있는 것으로 판단된다. 따라서, 백색광과 적색광에 의한 광전류-전압 특성의 차이로부터 CdS 및 CdS/CIGS 계면의 전기, 전자적특성을 평가할 수 있을 것으로 기대된다. 특히, 백색광에 비해 적색광에서는 온도가 내려갈수록 광전류-전압의 왜곡이 훨씬 심해지는 것을 확인하였다. 이러한 왜곡현상은 광세기에 의한 영향은 거의 없고, 백색광과 적색광의 광스펙트럼의 변화에 의해 나타났으며, CdS의 blue photon 흡수 여부와 관련이 있는 것으로 판단된다. CIGS 태양전지는 CdS 증착을 전후로 한 열처리가 광전압을 향상시키는 것으로 알려져 있으므로, 본 연구에서는 그러한 열처리에 의한 CdS/CIGS 계면의 특성 변화를 백색광, 적색광에 의한 저온 광전류-전압 특성 측정을 통하여 분석하였다. 열처리는 CdS를 증착한 후 $100^{\circ}C$ 부터 $250^{\circ}C$ 까지 $50^{\circ}C$ 간격으로 진행하였고, 전류-전압 특성은 100K 부터 300K 까지 10K 간격으로 측정하였다. 백색광, 적색광 저온 광전류-전압 특성의 변화를 열처리에 다른 태양전지 셀효율과 비교 분석하였다.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.747-750
• /
• 1999

A 30Watt inverter with 300: 1 dimming capability for high luminance, one cell, surface discharge plasma light source for LCD backlight was designed and tested. It was possible to achieve 300:1 dimming control by using the push-pull type inverter with burst-mode dimming control. The surface discharge plasma light cell with luminance of more than 5, 260 cd/$m^2$ was successfully operated.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.116-121
• /
• 1997

Pilot wetland reactor systems to test acid mine drainage treatment efficiencies for metals were designed and operated at the Dalsung mine and surveyed the operating problems. pH and Eh (redox potential) were measured in situ and anayses of Cd, Pb, As, Zn, Cu, Fe, Al and Mn were carried out in the laboratory. Maximum metal removal efficiencies of the reactor containing the rice stalks, the cow manure and limestones were that Cu, Zn, Fe, Cd, Al, Mn and Pb were lowered by 98%, 100%, 99%, 100%, 97%, 61% and 100%, respectively and at that time the pH and Eh of the effluents from the reactor were 6 and about -300 mV. However, the redox potential was raised and removal of metal elements except aluminium was decreased with operation time. It suggests that the reduced condition is very important for the metal removal. During the operation, problems such as scaling in pipes and volume change of the substrate within the reactor occurred, which were preventing the flow of main drainage in pipes and reactor.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.173-180
• /
• 1999

Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.

• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.41-48
• /
• 1996

We developed SAW gas sensor for monitoring SOx gas with high sensitivity. It was fabricated as a microsensor for detecting SOx gas by depositing sensing material on SAW device. As a detecting layer material, CdS was selected. Deposition of CdS in the form of thin films was carried out by the ultrasonic spray pyrolysis method using ultrasonic spray nozzle. Thin films with the uniform and large surface area for sensors were deposited. The stable pyrolysis environment provided by uniform and fine droplets formed by spray nozzle made it possible to obtain thin films with excellent quality. The minimum grain size of the CdS thin films was about 50 nm when deposited at $300^{\circ}C$. SAW gas sensors showed reasonable sensitivity and reproducibility. Further studies are required to investigate the interference of other gases to SOx gas detection.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.495-504
• /
• 2001

The objectives of this study were to understand the characteristics of Cd and Pb accumulation in various tissues of poplar species and the effects of ectomycorrhizal inoculation on the accumulation of above two heavy metals in the tissues. The mycelial inoculum of ectomycorrizal fungus, Pisolithus tinctorius was produced in peatmoss and vermiculite mixtures, and inoculated into potted soil with fresh cuttings of four species of Populus, P. alba ${\times}$ glandulosa (Pag). P. koreana ${\times}$ nigra var. italica (Pkn), P. nigra ${\times}$ maximowiczii(Pnm), and P. euramericana(Pe). The potted soils were added with 0, 30, and 80 ppm Cd, and 0, 50, and 300 ppm Pb. The cuttings were grown outdoors for about five months until the plants were harvested for measurement of growth, mycorrhizal infection, and metal contents in leaves, stems, and roots. The total dry weight of Pe treated with Cd and Pb was increased by mycorrhizal inoculation, while that of three other species was not affected by the inoculation. Cd was accumulated in the highest concentration in Pag and its concentration was increased by four times by mycorrhizal inoculation. The Pag accumulated Cd in the highest concentration in the leaves, while three other species accumulated Cd most in the roots. Pb was accumulated in the highest concentration in the roots of all the four species, while Pkn accumulated Pb in the leaves as much as in the roots. Without mycorrhizal inoculation Pe accumulated Pb most among the four species, while Pkn with mycorrhizal inoculation accumulated Pb two times more than in the same species without mycorrhizal inoculation. It was concluded that Pag was the most effective species among the four poplar species in Cd absorption from contaminated soil, and that Pe instead effectively absorbed Pb. Mycorrhizal inoculation increased the Cd accumulation in the tissues by four times in Pag and also increased Pb accumulation by two times in Pkn, with leaves being the major sites of metal accumulation. It may be possible to use these two poplar species in remedying the metal in the soil through the raking and removing the litter out of the contaminate site.

• Advances in environmental research
• /
• v.3 no.4
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.358-360
• /
• 2007

For large scaled solar cells and photosensors CdS thin films of $2{\mu}m$ thickness have deposited on ITO glass substrate by chemical bath deposition methode in $300^{\circ}C$ electric furnace. The surface roughness and resistance of cadmium sulphide(CdS) thin films with different microstructures and morphologies was investigated by using a x-ray diffraction (XRD), a scanning electron microscope (SEM), an atomic force microscope (AFM), and a near-field scanning microwave microscope (NFMM). As the different substrate heat temperatures, the microwave reflection coefficient $S_{11}$ and intensity of the (002) diffraction peak was changed, and the surface morphology also has shown differently.