• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.315-322
• /
• 1984

The dependence of polarographic parameters on the pressure for the reduction of In(III), Cr(III), Cd(II), Pb(II), Mn(II), Co(II), Tl(I) in 0.1M KCl aqueous solution at the dropping mercury electrode have been discussed. In this experiment the temperature varied from $25^{\circ}C\;to\;35^{\circ}C$ and the pressure ranges from 1 atmosphere to 1,800 atmospheres. By increasing the pressure the reduction half-wave potentials of all metal ions are shifted markedly to more negative values and the diffusion currents of all metal ions become considerably larger. The slope of the linear relationship of E vs. log[$\frac{id-i)}{i}$] become much larger with increase in pressure, which indicates more irreversible reduction. The temperature coefficient observed over the range of the temperature from $25^{\circ}C\;to\;35^{\circ}C$ are not sensitive with increase in pressure.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.260-264
• /
• 2007

We have studied stability in organic light-emitting diode depending on buffer layer and cathode. A transparent electrode of indium-tin-oxide(ITO) was used as an anode. An electron injection energy barrier into organic material is different depending on a work function of cathodes. Theoretically, the energy barriers for the electron injection are 1.2 eV, -0.1 eV, and 0.0 eV for Al, LiAl, and LiF/Al at 300 K, respectively. We considered the cases that holes are injected to organic light-emitting diode. The hole injection energy barrier is about 0.7 eV between ITO and TPD without buffer layer. For hole-injection buffer layers of CuPc and PEDOT:PSS, the hole injection energy barriers are 0.4 eV and 0.5 eV, respectively. When the buffer layer of CuPc and PEDOT:PSS is existed, we observed the effects of hole injection energy barrier, and a reduction of operating-voltage. However, in case of PVK buffer layer, the hole injection energy barrier becomes high(1.0 eV). Even though the operating voltage becomes high, the efficiency is improved. A device structure for optimal lifetime condition is ITO/PEDOT:PSS/TPD/$Alq_3$/LiAl at an initial luminance of $300cd/m^2$.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.239-247
• /
• 2008

Objective of this study was to investigate residual the levels of heavy metals in rice grain and soils of "Top-Rice" and common rice cultivation areas from 2005 to 2007. Soil and rice grain samples were taken from 33 "Top-rice" areas and neighboring paddies, and analyzed for the elements using ICP-OES and ICP-TOF-MS after acid digestion. A concentration of arsenic in paddy soil was 1.33 mg/kg which was below 1/5-1/11 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg), and paddy soil was 0.06 mg/kg of Cd(cadmium) being below 1/25-1/67 fold of the limits(concern: 1.5 mg/kg, action: 4 mg/kg). A level of Cu(copper) in paddy soil was 4.57 mg/kg which was below 1/11-1/27 fold of the threshold levels(concern: 50 mg/kg, action: 125 mg/kg), and Pb(lead) concentration in paddy soil was found to be a 4.68 mg/kg. In addition, Hg(mercury) concentration in paddy soil was to be a 0.03 mg/kg, which was below 1/131-1/328 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg). The average concentrations of As, Cd, Cu, Pb and Hg in the polished rice samples were 0.037, 0.043, 0.280, 0.048 and 0.002 mg/kg, respectively. These levels are lower than those of other countries in rice grains. Assuming the rice consumption of 205.7 g/day by total dietary supplements in Korea, the amount of total weekly metal intake of As, Cd, Cu, Pb and Hg by polished rice were estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. The PTWI(%) of As, Cd, Cu, Pb and Hg were 5.95(inorganic arsenic), 0.26(total arsenic), 14.79, 0.19, 4.65 and 1.07% estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. In conclusion, it was appeared that the heavy metals contamination in the brown and polished rice should not be worried in Korea.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.24.2-24.2
• /
• 2009

Indium Antimonide(InSb)는 $3{\sim}5\;{\mu}m$대 적외선 감지영역에서 기존 HgCdTe(MCT)를 대체할 물질로 각광받고 있다. 1970년대부터군사적 용도로 미국, 이스라엘 등 일부 선진국에서 연구되기 시작했으며,이온주입, MOCVD, MBE 등 다양한 공정을 통해 제작되어 왔다. InSb 적외선 감지소자는 $3{\sim}5{\mu}m$대에서 HgCdTe와 성능은 대등한데 반해, 기판의 대면적화와 저렴한 가격, 우주공간 및 야전에서 소자 동작의안정성 등으로 InSb적외선 감지기는 냉각형 고성능 적외선 감지영역에서 HgCdTe를 대체해 가고 있다. 하지만 InSb는 77 K에서 0.225eV의 작은 밴드갭을 갖고 있기 때문에 누설전류로 인한 성능저하가 고질적인문제로 대두되었고, 이를 해결하기 위한 고품질 절연막 연구가 InSb적외선 수광 소자 연구의 주요이슈 중 하나가 되어왔다. 그 동안 PECVD, photo-CVD, anodic oxidation 등의 공정을 이용하여 $SiO_2$, $Si_3N_4$, 양극산화막(anodic oxide) 등 다양한 절연막에 대한 연구가 진행되었고[1,2], 절연막과 반도체 사이 계면에서의 열확산을 억제하여 계면트랩밀도를 최소화하기 위한 공정개발이 이루어졌다[3]. 하지만 InSb 적외선 감지기술은 국방 및 우주개발의 핵심기술중 하나로 그 기술의 이전이 엄격히 통제되고 있으며, 현재도 미국과 이스라엘, 일본, 영국 등 일부 선진국 만이 기술을 확보하고 있고, 국내의 경우 연구가 매우 취약한 실정이다. 따라서 본 연구에서는 InSb 적외선 감지기의 암전류를 제어하기 위한 낮은 계면트랩밀도를 갖는 절연막 증착 공정을 찾고자 하였다. 본 연구에서는 n형 (100) InSb 기판 ($n=0.2{\sim}0.85{\times}10^{15}cm^{-3}$ @ 77K)에 PECVD를 이용하여 $SiO_2$, $Si_3N_4$ 등을 증착하고 절연막으로서 이들의 특성을 비교 분석하였다. $SiO_2$는 160, 200, $240^{\circ}C$에서 $Si_3N_4$는 200, $300^{\circ}C$에서 증착하였다. Atomic Force Microscopy(AFM) 사진으로 확인한 결과, 모든 샘플에서표면거칠기가 ~2 nm의 평탄한 박막을 얻을 수 있었다. Capacitance-Voltage 측정(77K)을 통해 절연막 특성을 평가하였다. $SiO_2$와 $Si_3N_4$ 모두에서 온도가 증가할수록 벌크트랩밀도가 감소하는 경향을 볼 수 있었는데, 이는 고온에서 증착할 수록 박막 내의 결함이 감소했음을 의미한다. 반면계면트랩밀도는 온도가 증가함에 따라, 1011 eV-1cm-2 대에서 $10^{12}eV^{-1}cm^{-2}$ 대로 증가하였는데, 이는 고온에서 증착할 수 록 InSb 표면에서의 결함은 증가하였음을의미한다. 암전류에 큰 영향을 주는 것은 계면트랩밀도 이므로, $SiO_2$와 $Si_3N_4$ 모두 $200^{\circ}C$이하의 저온에서 증착시켜야 함을 확인할 수 있었다.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.300-307
• /
• 2001

This study was conducted to determine the content of inorganic metals in botanical pills and assess the safety of mineral balance in body. Inorganic metals (Fe, Ca, Zn, Na, Mg, K, Pb, Cd, Cr) were detected in 11 kinds, 51 samples by Atomic Absorption Spectrophotometer. The average concentration of inorganic metals in botanical pills was in the order of K(7933.32 mg/kg)>Na(5848.58mg/kg)>Ca(2741.60mg/kg)>Mg(1595.34mg/kg)>Fe(353.14mg/kg)>Zn(22.49mg/kg)>Cr(3.51mg/kg)>Pb(0.24mg/kg)>Cd(0.09mg/kg). In samples, Morus and Laminaria contained a great quantity of K and Na, Acanthopanacis cortex, Eucommia ulmoides, Pinus densiflora, Lycii fructus, Allium sativum for. pekinense, and Platycode radix had much more amount of K than that of Na, in the mean time, Artemisia capillaris, Carthamus tinctorius seed, and Rubi fructus had various kinds of plenty inorganic metals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.589-597
• /
• 2016

There are a number of industrial complexes which could be a source of heavy metal (loid)s contamination of arable soil in Gyeongnam province of South Korea. Heavy metal (loid)s accumulation of plant is more related to the concentration of plant available heavy metal (loid)s in arable soil than that of total heavy metal (loid)s. The objectives of this study were 1) to examine heavy metal concentrations in soils located near industrial complexes in Gyeongnam province and 2) to determine the relationship between concentration of plant available heavy metal (loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 7 industrial complexes in Gyeongnam province. Total heavy metal (loid)s concentration, available heavy metal (loid)s concentration, and chemical properties of collected soils were measured. The mean concentrations of arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) in the soils were $5.8mg\;kg^{-1}$, $1.3mg\;kg^{-1}$, $0.03mg\;kg^{-1}$, $51.5mg\;kg^{-1}$, and $68.7mg\;kg^{-1}$, respectively. Total concentration of Cd and Zn in arable soil located near ${\nabla}{\nabla}$ industrial complex exceeded the warning criteria ($4mg\;kg^{-1}$ and $300mg\;kg^{-1}$ for Cd and Zn, respectively) as described by in the soil environmental conservation Act of Korea. The concentration of plant available heavy metal (loid)s was negatively related to the soil pH and available Pb and Zn concentrations had relatively high correlation coefficient when compared with other heavy metal (loid)s. The concentration of plant available Pb and Zn was negatively related to that of organic matter (OM). Based on the above results, it might be a good soil management to control pH and OM concentration with soil amendments such as lime and compost to reduce phytoavailability of heavy metal (loid)s in arable soil located near industrial complex.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.300-306
• /
• 2000

The rate of apparent nitric oxide (NO) release, as measured in the exhaust gas of green alga, Scenedesmus obliquus, depended on the light intensity and pH. It doubled after lowering the temperature from $25^{\circ}C{\;}to{\;}15^{\circ}C$ and strongly decreased from $35^{\circ}C{\;}to{\;}42^{\circ}C$. The Scenedesmus cells, deficient in nitrogen or phosphorus, demonstrated a significant increase in NO production following their transfer to nitrate- and phosphate-rich media. The addition of herbicides (DCMU and glyphosate) or toxic concentrations of $Cu^{2+}{\;}or{\;}Fe^{3+}$ produced strong NO peaks, resembling those that occurred after sudden darkening. An increase in the $Ni^{2+}$ concentration to 20 ppm resulted in a gradual increase of NO release from the initial ~1.5 ppbv to>20 ppbv, whereas $Cd^{2+}$ instantaneously suppressed the NO by the cultures of Scenedesmus was not altered by L-NNA, an inhibitor of nitric oxide synthase (NOS), or by its substrate, L-arginine. This seems to exclude the role of NOS in the NO formation under study. Accordingly, it can be assumed that the rate of NO formation is mainly a function of dynamic nitrite pool sizes and environmental factors significantly affect the NO production in algae.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.684-687
• /
• 2004

We have developed multi-layer passivation films of UV-polymerized film/inorganic composite film to improve the long lifetime of passivated OLEDs for very thin flat panel applications. Preliminary lifetime to half initial luminance ($L_{o}{\sim}\;3,000\;cd/m^2$) of order 300 Hr is achieved on the conventional encapsulated test pixel using a passive matrix drive at room temperature; 570 Hr lifetime is achieved on a de tested multi-layer passivated 9$mm^2$ test pixel.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.343-345
• /
• 2017

We present the development of a spectral dispersion device for wideband spectroscopy for which the primary scientific objective is the characterization of transiting exoplanets. The principle of the disperser is simple: a grating is fabricated on the surface of a prism. The direction of the spectral dispersion power of the prism is crossed with the grating. Thus, the prism separates the spectrum into individual orders while the grating produces a spectrum for each order. In this work, ZnS was selected as the material for the cross disperser, which was designed to cover the wavelength region, ${\lambda}=0.6-13{\mu}m$, with a spectral resolving power, $R{\geq}50$. A disperser was fabricated, and an evaluation of its surface was conducted. Two spectrometer designs, one adopting ZnS (${\lambda}=0.6-13{\mu}m$, $R{\geq}300$) and the other adopting CdZnTe (${\lambda}=1-23{\mu}m$, $R{\geq}250$), are presented. The spectrometers, each of which has no moving mechanical parts, consist simply of a disperser, a focusing mirror, and a detector.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.258-262
• /
• 2007

최근 디지털 사진 시장은 블로그와 UCC 라는 트랜드와 함께 더욱 확대되고 있다. 이러한 시장 환경에서 디지털 카메라는 디지털 사진의 장점과 기기 가격의 하락으로 널리 보급되고 있다. 디지털 카메라의 보급에 따라 촬영된 방대한 사진자료의 검색과 관리의 중요성이 부각되고 있으며 이를 활용하기 위해 다방면에서 많은 연구가 진행되고 있다. 하지만 급속도로 확장된 디지털 카메라 시장에서 사용자에 대한 사용 패턴 조사와 분석은 미비한 실정이다. 본 논문에서는 디지털 카메라 시장 업계의 동향과 하드웨어적인 측면을 조사하고, 온라인 설문을 통하여 사용자의 사용 패턴을 조사하여 분석하였다. 총 34 명을 대상으로 디지털 카메라의 사용 패턴을 조사하였다. 저장 매체를 설문하는 조사에서는 응답자의 82%에 달하는 대부분의 사용자가 HDD를 주된 저장매체로 사용하고 있었고 CD나 DVD는 12%, 인화하여 보관하는 경우는 6%에 그쳤다. 보관되고 있는 사진의 용량을 조사하는 설문에서는 약 35%에 해당하는 사용자들의 10GB에 달하는 사진을 보유하고 있었고, 주로 찍는 화소로는 약 41%의 사용자가 300만 화소로 촬영하고 있었다. 이러한 사용자 패턴 분석과 설문 자료 결과를 통하여 사진 관련 커뮤니티나 포털 사이트를 기획하거나 새로운 인터페이스의 디지털 카메라를 설계하는데 기여할 수 있다.