LCD 패널은 자체적으로 발광할 수 없어 외부 광원인 BLU가 필요하다. BLU는 LCD 모듈에 포함되어 사용되고 LCD 패널의 불량을 검사하는 테스터에서도 사용된다. 최근에는 BLU가 CCFL에서 LED로 빠르게 변화되고 증가해왔다. CCFL은 초고압 전원이 필요하고, 열도 많이 발생하며, 일정한 휘도를 유지하기가 어렵다. LED는 전력소모량이 적고, 일정한 휘도를 유지한다. 그러나 현재 테스터에서 사용되는 BLU는 CCFL을 사용하고 있다. 본 연구에서는 LCD 패널의 불량을 검사할 수 있는 검사용 LED BLU를 개발한다. 또한 12~24인치의 LCD 패널을 모두 검사할 수 있도록 LED BLU를 24인치 크기로 제작하고 LCD패널의 크기에 따라 LED BLU가 동작하도록 개발한다.
CCFL(Cold Cathode Fluorescent Lamp)는 LCD의 BLU와 특수조명용으로 널리 활용되고 있다. CCFL 제조공정에 있어 CCFL 전극 산화막이 형성되어 솔더 불량을 가져오기 때문에 산화 막 제거가 필요하다. 본 논문에서는 CCFL 전극 산화 막 제거를 위하여 플라즈마 처리를 수행하였다. 플라즈마 처리 최적 공정 확보하기위하여 면 저항, XRD, AFM, 솔더링 테스트 등의 분석이 진행되었다. 플라즈마 최적 공정 조건인 사용전력 600W와 처리시간 70초에서 최소의 면 저항과 최대의 솔더 피복 비율이 측정되었다. 이와 같은 현상은 플라즈마 처리로 구리 산화 막 제거에 기인한 것으로 확인되어 플라즈마를 이용한 전극 산화 막 제거 공정은 CCFL 전극 처리 공정에 활용이 기대된다.
LCD BLU의 CCFL 전극에 사용되는 몰리브덴 전극의 주요소재인 몰리브덴 컵과 몰리브덴 핀은 국내 가공기술이 개발되지 못하여 전량 일본에서 수입하여 사용되고 있어 CCFL 제조업체들의 납기 및 경쟁력에 부담을 주고 있다. 본 연구에서는 LCD BLU의 CCFL 전극에 사용되는 몰리브덴 핀의 제조 기술을 개발하는 연구로 직선처리 기술개발, 몰리브덴 와이어 표면처리 기술개발, 와이어 절단기술 개발, 몰리브덴 핀의 제작, 검사용 JIG와 Fixture 설계 및 제작, 몰리브덴 핀 시제작 및 해석, 몰리브덴 핀 전수검사 기술개발에 관한 연구를 수행하였으며 본 논문에서는 몰리브덴 핀 제작에 있어 전수검사기 융합설계에 대한 연구를 다루고자 한다.
LCD BLU의 CCFL 전극에 사용되는 몰리브덴 전극의 주요소재인 몰리브덴 컵과 몰리브덴 핀은 국내 가공기술이 개발되지 못하여 전량 일본에서 수입하여 사용되고 있어 CCFL 제조업체들의 납기 및 경쟁력에 부담을 주고 있다. 본 연구에서는 LCD BLU의 CCFL 전극에 사용되는 몰리브덴 핀의 제조 기술을 개발하는 연구로 직선처리 기술개발, 몰리브덴 와이어 표면처리 기술개발, 와이어 절단기술 개발, 몰리브덴 핀의 제작, 검사용 JIG와 Fixture 설계 및 제작, 몰리브덴 핀 시제작 및 해석, 몰리브덴 핀 전수검사 기술개발에 관한 연구를 수행하였으며 본 논문에서는 몰리브덴 핀제작 및 검사용 JIG and Fixture의 설계 및 제작에 대한 연구를 다루고자 한다.
The time dependences of the luminance properties of 55-inch CCFL and LED backlights and 32-inch FFL backlights with LCD panels were investigated during the warm-up time from the cold start. The long-term luminance maintenance curve of a standard CCFL was examined in a time window up to 5000 hours. These two time dependences are important characteristics from the viewpoint of initial picture quality and lifetime reliability, respectively. Empirical equations were suggested for the analysis of the time dependence of these luminance data. These approaches are expected to be helpful in predicting the luminance properties of backlights based on the luminance data obtained in a limited time window.
At present, Characteristic of high color reproduction for LCD products needed in Display market. Therefore, The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But High color reproduction phosphor is short life time as compared with conventional phosphor. In this experiment, by using split the Red, Green, Blue CCFL with high color reproduction phosphor instead of conventional high color reproduction CCFL. We knew that the high color reproduction RGB split CCFL BLU has same spectrum data and chromaticity, but has long life time as manufacturing RGB split CCFL and reduce chromaticity shift following long time discharge as compared with conventional high color reproduction CCFL.
휴대용 정보기기의 발달은 평판 디스플레이 장비 및 부품 소재의 수요급증으로 이어지고 있으며, 이 중에서 LCD는 LCD TV, 컴퓨터 모니터, 디지털 카메라, CNS(car navigation system), 게임기 등의 다양한 제품으로 그 응용범위가 폭넓어지고 있다. 이와 같이 LCD 시장이 급증함에 따라 LCD 배면조명 모듈인 BLU(backlight unit) 생산을 위한 제조업체들의 수도 크게 증가하였으며, 우수한 품질의 광학적 특성을 갖는 BLU 개발을 위해 광반사면 설계에 관한 연구가 꾸준히 진행되고 있다. 본 연구에서는 경험과 시행착오에 기초하여 수작업에 주로 의존하여 온 기존의 패턴설계환경을 개선하기 위해 CCFL을 광원으로 한 백라이트의 패턴 설계툴을 개발하였다. 본 연구의 검증을 위해 실모델의 백라이트에 대한 광반사면을 설계한 후, BM-7으로 휘도균일도를 측정하였다. 휘도균일도 측정결과, 본 연구의 설계툴을 사용한 BLU가 기존의 설계방식으로 보통 5회 이상의 시도에서 얻을 수 있는 휘도균일도를 1차 시도에서 얻을 수 있었다는 점에서 기존의 설계방식보다 우수한 설계 성능을 보임을 알 수 있었다.
A kind of fluorescent lamps CCFL(Cold Cathod Fluorescent Lamp) is used for backlight of LCD and the demand of backlight for TV is getting more. CCFL is also used in a backlight for TFT-LCD panel. BLU(Backlight Unit) has lots of components so it looks a electrical product. As the size of LCD display is larger with increasing of the demand, to drive CCFL inverter is more important. Therefore, a sort of modeling to drive 4 lamps with a transformer is used and we have a simulation test with proposed modeling so we can take some data from the test. The utility of the proposed modeling is verified through using for 30-inch LCD backlight with the data.
Characterization of the microweld CCFL electrode for the TFT-LCD backlight unit was carried out in terms of the glass beading heat treatment conditions. We evaluate the weld zone and parent metal of the microweld CCFL electrodes that were exposed to simulated glass beading heat treatment. The CCFL electrode was composed of the cup made with pure Ni, the pin made with pure Mo and the lead wire made with Ni-Mn alloy. Each part of the electrode was assembled together by micro spot welding process and then the assembled electrodes were exposed to simulated glass beading temperatures of $700^{\circ}C,\;750^{\circ}C$ and $800^{\circ}C$. The microstructures of the microweld CCFL electrode were observed by using optical microscope, scanning electron microscope and EDS. Micro-tensile and microhardness test were also carried out. The results indicated that the grain coarsening in the HAZs(heat affected zones) for both the cup-pin weld and pin-lead wire were exhibited and the grain coarsening of the HAZ for the cup and the lead wire was more obvious than the HAZ of the pin. The micro-tensile test revealed that the fracture occurred at the cup-pin weld zone for all test conditions. The fracture surface could be classified into two parts such as pin portion and cup portion including weld nugget. The failure was seemed to be initiated from the boundary between nugget and pin through the weld joint. The result of the microhardness measurement exhibited that the relatively low hardness value, about 105HV was recorded at the HAZ of the cup. This value was about 50% less than that of the original value of the cup. The reduction of the microhardness was considered as the cause of the grain coarsening due to welding process. It was also appeared that there was no change in electric resistance for the standard electrodes and heat treated electrodes.
최근, LCD-TV의 대형화가 경쟁적으로 진행되고 있으며 대형 BLU를 제작하기 위해서는 백라이트의 직경을 대구경 화하고, 또한 고화질을 이루기 위하여 휘도특성을 개선시켜야 한다. 통상적으로 백라이트에 사용되는 고압방전은 환경이 증가할수록 휘도가 저하하는 특성을 나타내므로 대화면 LCD-TV를 개발하는데 문제점을 갖고 있다. 또한, LCD-TV 백라이트로 가장 많이 사용하는 CCFL은 병렬로 구동할 수 없어 다수의 트랜스포머가 필요하여 전체적인 BLU가격을 상승시키는 요인이 되고 있어 병렬구동이 가능한 EEFL을 백라이트로 사용하고자 하는 노력이 진행되고 있으나 CCFL에 비하여 휘도가 낮아 사용이 제한되고 있는 상황이다. 본 연구에서는 고휘도의 병력구동이 가능한 새로운 EEFL을 개발하였으며, 그 특성을 분석한 결과 기존 EEFL에 비하여 40%이상의 광효율을 증가시키고, 대구경에서 CCFL보다 2배 기존의 EEFL에 비하여 3배 이상의 휘도를 증가시킬 수 있으며, 동시에 병렬구동이 가능한 고휘도 외부전극램프를 개발하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.