• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.507-514
• /
• 2012

XML-based standards such as CCD(Continuity of Care Document) and CCR(Continuity of Care Record) have been developed for representation, integration, and exchange of personal health record(PHR), and various of researches on PHR based on the standards have been conducted. These researches have developed and used CCD/CCR parsers each with their own different ways, but it can be hard to develop and update the parsers because of the structural complexity of the standards. Moreover, inter-exchange between CCD and CCR documents in the PHR-related medical information systems should be possible for the interoperability of the systems. Therefore, we proposed a designing method to develop the tools treating XML-based CCD/CCR documents. And we implemented CCD/CCR parser based on the proposed method and developed a converter from CCD to CCR using the parsers. To confirm the usefulness of the developed tool, we performed an experiment of creating CCD documents using the personal health data gathered from chronically ill patients in Kyungpook National University Hospital and of converting from the CCD documents to CCR documents.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.25-30
• /
• 2006

An infrared imaging method is proposed in which direct measurement of the spectral response of CCD sensors can be achieved through digital image processing. This method allows for a simple and economic method to detect the spectral sensitivity of commercialized CCD sensors. The key components of the apparatus are a monochromator, CCD-sample supporter and a personal computer equipped with a digital image processing systems. Tentative experimentation conducted on the commercialized CCD camera has resulted in a fairly consistent agreement with the theoretical model.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.173-177
• /
• 1995

The scanning type modulation transfer function (MTF) measurement system of linear charge coupled device (CCD) imagers is fabricated and the MTF of a linear CCD imager is tested. Measured MTF values are very sensitive to small angle knife-edge skew within 1 degree and show different results in several wavelengths. The MTF of the linear CCD imager is measured in different color temperatures of a tungsten filament lamp and the MTF uniformity of ti,t eel) pixels is tested.tested.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.97-102
• /
• 2002

In this paper, we propose the technique for recognizing the human s emotion by using the CCD color image. To do this, we first get the face image by using skin-color from the original color image acquired by the CCD camera. And we propose the method for finding man s feature points(eyebrows, eye, nose, mouse) from the face image and the geometrical method for recognizing human s emotion (surprise, anger, happiness, sadness) from the structural correlation of man s feature feints. The proposed method in this paper recognize the human s emotion by learning the neural network. Finally, we have proven the effectiveness of the Proposed method through the experimentation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.411-421
• /
• 1988

This paper offers a method to design CCD four-valued circuits using the tabular method. First, the four-valued logic function is decomposed by hand-calculation or computer program. Nest, the algorithm is derived form the tabular method based on the decomposition process to realize the DDC four-valued circuit. According to this algorithm, the two-variable four valued logic function is decomposed and realized by CCD network with four basic gates. The synthesis method in this paper proves that the number of devices and cost is considerably reduces as compared with the existing methods to realize the same logic functions.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.185-195
• /
• 1994

Using $1024\times1024$ pixels CCD camera of ChungBuk National University Observatory (CBNUO), 62 photometric observations were made on January 11-12, 1993. A time of minimum lights of U Cep was determined as JD Hel 2448999.7274 from our data. On October 21-22 in 1993, CCD photometry in V and R for GW Cephei and V700 Cygni was carried out with 309${\times}$584 pixels cooled CCD system of Behlen Observatory, University of Nebraska-Lincoln (BOUNL) and 168 observations were obtained. From the data times of minimum lights JD Hel 2449282.8485 for GW Cep and JD Hel 2449282.7979 were determined. To developed a new CCD system of CBNUO, the CCD photometry method using at CBNUO is compared with at BOUNL.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.260-272
• /
• 2000

In this paper, we propose a simple auto calibration method for a CCD camera with wide an91e lens that causes high degree of distortion. We formulate a cubic warping equation for the relationship between the cross points on the distorted calibration target and the corresponding points from the standard grid image, and calibrate distorted images using the computed parameters. The experiment has been performed with the distorted images resulted from wide angle CCD camera. The experimental results show that the proposed method, in terms of the average and maximum distorted error, has higher accuracy than the existing methods because of maintaining the calibration ratio more than 95 percent. The proposed method is applicable to wide variety of images regardless a type of lens or distortion.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1751-1754
• /
• 2003

CCD Camera System으로 capture 한 image를 표준 display장치로 재현할 때 capture 할 당시의 원 피사체의 모습을 그대로 재현하여야만 한다. 그러나 일반 consumer 용 camera system의 CCD channel spectral sensitivity 특성이 인간의 spectral sensitivity(1(λ), m(λ), 5(λ)) 특성과 일치하지 않고, linear transform의 관계도 성립하지 않음으로써 capturing시 근본적인 color error가 발생하게 된다. 기존의 CCD Camera System 에서는 CCD sensor 의 color 정보와 display 장치의 color 정보와의 단순한 산술적인 관계로 color를 재구성하는 방법을 사용하고 있어 원 피사체의 color 를 그대로 재현할 수가 없다. 본 논문에서 제시하는 알고리즘은 CCD 의 channel spectral sensitivity특성 과 CIE-color matching function과의 관계를 고려하여 color를 재구성함으로써 color error를 줄이도록 하였다 제시된 알고리즘의 color error를 검증하기 위하여 물체의 고유반사율을 알고 있는 AGFA IT8.7-2 test chart(283 spectra), Dupont Paint Chips(120 spectra), Mcbeth Color Checker(64 spectra) 및 Natural Objects(170 spectra) 등 다양한 objects spectra(637 spectra) [1][2]를 이용하여 기존 방법의 알고리즘과 비교하여 보았다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.297-301
• /
• 2002

본 논문에서는 신호처리를 이용한 평행축 입체 카메라의 주시각 제어 방법을 제시한다. 평행축 입체 카메라는 양안식 입체 카메라 중 가장 간단하게 만들 수 있는 장점이 있는 반면에, 좌, 우 영상센서 사이의 거리가 일정하게 고정되어 있어, 물체의 거리 변화에 따른 입체 영상 시차 조절 기능인 주시각 제어 기능이 없다는 단점이 있다. 영상 센서 (CCD) 와 렌즈를 분리하고 영상 센서가 평행하게 수평으로 움직이며 주시각을 제어하도록 하는 수평 이동축 입체 카메라는 평행축 입체 카메라의 단점을 보완할 수 있지만, 실제 구현에 많은 어려움이 있다. 본 논문에서는 주시각 제어를 위한 CCD의 이동은 실제 영상에서 피사체의 이동으로 나타난다는 사실을 이용하여, 평행축 입체 카메라로 얻은 영상에서, CCD의 이동으로 인해 사라지는 부분만큼 제거하고 영상의 수평 수직 방향에서 원래 영상의 크기로 복원하기 위해 보간하는 과정을 통해 주시각 제어를 구현한다. 제안된 방법을 통해 얻어진 실험 결과는 CCD의 이동량에 따라서 화질의 열화 정도가 다르게 나타남을 보여 주지만, 실제 시스템에서 CCD의 이동량은 크지 알기 때문에 화질 열화를 거의 느끼지 않으면서 주시각이 제어된 입체 영상을 얻을 수 있음을 보여준다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.649-660
• /
• 2003

The paper presents an evaluation of the tensile strength of the expansion anchor that can cause failure in the concrete based on the design of the anchorage. Tests of the heavy-duty anchor and the wedge anchor that are domestically manufactured and installed in plain concrete members are conducted to probe the effects of the embedded depth, concrete strength, and anchors spacing. The design of post-installed steel anchors is presented using the Concrete Capacity Design (CCD) approach. The CCD method is applied to predict the concrete failure load of the expansion anchor in plain concrete under monotonic loading for important applications. The concrete tension capacity of the fastenings with heavy-duty anchors and wedge anchors in plain concrete predicted using the CCD method is compared with the test results. For the CCD method, a normalization coefficient of 9.94 is appropriale for the nominal concrete breakout strength of an anchor or a group of wedge anchors in tension. On the other hand, a normalization coefficient of 11.50 is appropriate for the nominal concrete breakout strength of an anchor or a group of heavy-duty anchors in tension.