• 한국디지털건축인테리어학회논문집
• /
• 제12권1호
• /
• pp.99-108
• /
• 2012

The purpose of this study is to demonstrate the improvement of the education process in architectural engineering through the analysis of the advantages of the BIM tool. As public institutions and owners have been introduced to Building Information Modeling (BIM) tools, BIM has become an important factor in the design process in undergraduate university programs. First, BIM-related issues, domestic and overseas, was analyzed. Second, a case study of BIM education was analyzed at K University under the ABEEK process. Students participated a survey about the understanding of BIM and the use of BIM tools. As a result of the analysis, six advantages of the use of BIM tools were found. As a result of this research, following five issues are found about BIM education through advantage of using BIM tools. The result of this research was verified by conducting a survey on the usage of BIM softwares. The limitation of this study was to analyze the case study of only limited numbers of participants at the university.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.25-31
• /
• 2004

Machinability in metal cutting processes depends on cutting input conditions such as cutting velocity, feed rate, depth of cut, types of work material and tool shape factors. In this study, to assess chip breaking characteristics of a turning process, an equivalent oblique cutting system to this has been established. And the equivalent effective rake angle was determined using side rake angle, back rake angle and side cutting edge angle of the tool. A non-dimensional parameter, Chip breaking index(CB), was used to assess Chip breaking characteristics of chip in conjunction with the equivalent effective rake angle. In case of positive rake angles of the equivalent effective rake, the back rake angle has little effect on the chip breaking characteristics however, in case of negative ones, the side rake angle has some effect on Chip breaking characteristics.

• Journal of Preventive Medicine and Public Health
• /
• 제44권5호
• /
• pp.201-209
• /
• 2011

Objectives: This study examined the use of health impact assessment (HIA) as a tool for intersectoral collaboration using the case of an HIA project conducted in Gwang Myeong City, Korea. Methods: A typical procedure for rapid HIA was used. In the screening step, the Aegi-Neung Waterside Park Plan was chosen as the target of the HIA. In the scoping step, the specific methods and tools to assess potential health impacts were chosen. A participatory workshop was held in the assessment step. Various interest groups, including the Department of Parks and Greenspace, the Department of Culture and Sports, the Department of Environment and Cleansing, civil societies, and residents, discussed previously reviewed literature on the potential health impacts of the Aegi-Neung Waterside Park Plan. Results: Potential health impacts and inequality issues were elicited from the workshop, and measures to maximize positive health impacts and minimize negative health impacts were recommended. The priorities among the recommendations were decided by voting. A report on the HIA was submitted to the Department of Parks and Greenspace for their consideration. Conclusions: Although this study examined only one case, it shows the potential usefulness of HIA as a tool for enhancing intersectoral collaboration. Some strategies to formally implement HIA are discussed.

• 한국정보처리학회논문지
• /
• 제2권2호
• /
• pp.168-175
• /
• 1995

성공적인 소프트웨어 개발 환경을 구축하기 위하여 도구 사이의 인터페이스가 잘 정의되어야 한다. 최근에 활발히 연구되는 CASE 도구들이 잘 결합하여 일관성있는 환경이 되기 위해서는 자료 저장소의 설계가 중요하다. 특히 요지보수를 위한 도구 개 발은 원시 코드의 변경과 프로그램으로 표현된 객체들 사이의 상호관계를 잘 나타내도 록 자료 저장소를 설계하여야 한다. 본 논문에서는 소프트웨어 유지보수 환경 구축에 필요한 자료 저장소 설계에 통합 방법을 도입하였다. 유지보수 대상 객체들을 정의하 고 객체들 사이의 관계를 나타내었으며 자료 저장소를 접근하기 위한 방법도 제안하 였다. 이 방법에 의하면 유지보수하는 동안 변경을 관리하기 위한 버젼 및 현상관리 뿐만 아니라 질의 서비스, 자료교환 서비스가 효율적으로 이루어진다.

• 한국BIM학회 논문집
• /
• 제4권4호
• /
• pp.1-12
• /
• 2014

As interest for visualization and real time processing of construction management information was heightened recently, a diversity of management tools have been developed and corresponding systems also have been changed. In the case of BIM(Building Information Modeling) which is being spotlighted as such kind of management tool, its outcome such as technical innovation and time saving through overseas success case, reducing effect of unnecessary work, and so forth has continuously been established. The BIM in which various information related with life cycle of project are managed with the base of 3D object is useful as an information management tool of construction project which becomes complex and large in its scale. The aim of this paper is analysis or reliability on BIM design for expressway. To solve these issues, this study analyzes the design document, road design handbook, guide. Also this paper performed analysis of reliability 2D vs. BIM quantity calculation. This pilot projects "BIM design at Daegu expressway Lot No.5" lays the foundation for future work on BIM based civil engineering design.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.125-133
• /
• 1998

Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64mm height respectively are tested. A plain tube having same diameter as the finned tubes is also tested for comparison. In case of condensation CFC-11 condensates at saturation state of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube. The tube having fin density of 1299fpm and 30grooves has the best condensation overall heat transfer coefficient. However, as far as boiling heat transfer coefficient concerns, fin tubes with cave show higher value than low fin tube having fin density of 1299fpm and 30 grooves.

• 한국ITS학회 논문지
• /
• 제4권2호
• /
• pp.45-52
• /
• 2005

ITS에 대한 사업효과분석은 기존의 전통적인 계획모형을 통해서 산정하기 어려운 문제점을 안고 있다. 이는 전통적인 교통계획 모형이 교통정보와 ITS기술 도입에 따른 영향에 대해 민감하지 못할 뿐만 아니라, ITS기술의 비용, 편익 값에 대한 입력자료가 부재하기 때문이다. Sketch-planning 기법은 전통적인 4단계수요모형을 기반으로 ITS구축에 따른 여행자 패턴 변화를 추정하여 입력 자료로 활용한다. 구축할 ITS시스템의 대안을 수립하고 이때 기본 사례(Do Nothing Case)와 실행사례(Do Case)를 비교하여 이에 대한 비용 편익을 산출하는 과정으로 구성되어 있다. Sketch-planning기법은 입출력 인터페이스, 대안발생 모듈, 편익모듈, 비용모듈, 대안비교 모듈의 5개 모듈로 구성되어 있다. 본 논문에서는 대전광역시 첨단교통모델도시를 사례로 Sketch-planning기법을 이용하여 분석하였다.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.194-203
• /
• 2005

The process of guaranteeing that a distributed real-time control system will meet its timing constraints, is referred to as schedulability analysis. However, schedulability analysis algorithm cannot be simply used to analyze the system because of complex calculations of algorithm. It is difficult for control engineer to understand the algorithm because it was developed in a software engineer's position. In this paper we introduce a Response-time Analysis Tool(RAT) which provides easy way far system designer to analyze the system by encapsulating calculation complexity. Based on the RAT, control engineer can verify whether all real-time tasks and messages in a system will be completed by their deadline in the system design phase.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제7권6호
• /
• pp.569-581
• /
• 2001

XML의 등장으로 인터넷의 제2의 혁명을 가져올 것이라는 기대는 XML 스키마 정의 언어가 표준화됨으로써 현실적으로 실현 가능하게 되었다. XML 스키마를 설계하는 것은 DTD를 설계하는 것보다 더 복잡하며 더 많은 정보가 제공되게 된다. 이에 XML 스키마를 모델링하는 도구들이 등장하고 있으며, 이 도구는 일반적인 모델링 도구와는 다른 기능이 요구된다. 본 논문에서는 \"설계 후 즉시 개발\"이라는 XML 응용 프로그램 개발 방법론을 제안하고, 이를 XSD4j에서 구현하였다. XSD4j를 사용하면 개발자는 쉽고 개념적인 수준의 스키마를 모델링할 수 있다. 또한, XML 문서를 위한 XML 저장매체 스키마의 생성 및 XML 문서와 응용 프로그램간의 표준적인 인터페이스인 DOM API를 얻을 수 있어 XML 응용 프로그램의 작성을 쉽게 할 수 있다.쉽게 할 수 있다.

• 설비공학논문집
• /
• 제25권12호
• /
• pp.693-699
• /
• 2013

This paper describes a method for size optimization of the major design variables for solar water heating systems at the stage of concept design. The widely used RETScreen simulation tool was used for optimization. Currently, the RETScreen tool itself does not provide a function for optimization of the design parameters. In this study, an optimizer was combined with the software. A comparative study was performed to evaluate the RETScreen-based approach with the case study of a solar heating system in an office building. The optimized results using the RETScreen model were compared to previously published results with the TRNSYS model. The objective function of the optimization is the life-cycle cost of the system. The optimized design results from the RETScreen model showed good agreement with the optimized TRNSYS results for the solar collector area and storage volume, but presented a slight difference for the collector slope angle in terms of the converged direction of the solutions. The energy cost, life-cycle cost, and thermal performance regarding collector efficiency, system efficiency, and solar fraction were compared as well, and the RETScreen model showed good agreement with the TRNSYS model for the conditions of the base case and optimized design.