• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.10a
• /
• pp.242-242
• /
• 2017

• Explosives and Blasting
• /
• v.10 no.4
• /
• pp.6-18
• /
• 1992

This Test Blasting aims to dig pier foundation in the water, therefore the Caps & Powder needs 5-20% more Than the amount of ground blasting works. It results in the Dimension of water blasting standardization This project is Contracted with th office of HAM River Development of Kyunggi province.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.167-172
• /
• 2020

The effectiveness of in situ sediment capping as a technique for heavy metal risk mitigation in Hyeongsan River estuary, South Korea was studied. Sites in the estuary were found previously to show moderate to high levels of contamination of mercury, methylmercury and other heavy metals. A 400 m x 50 m section of the river was selected for a thin layer capping demonstration, where the total area was divided into 4 sections capped with different combinations of capping materials (zeolite, AC/zeolite, AC/sand, zeolite/sand). Pore water concentrations in the different sites were studied using diffusive gradient in thin film (DGT) probes. All capping amendments showed reduction in the pore water concentration of the different heavy metals with top 5 cm showing %reduction greater than 90% for some heavy metals. The relative maxima for the different metals were found to be translated to lower depths with addition of the caps. For two-layered cap with AC, order of placement should be considered since AC can easily be displaced due to its relatively low density. Investigation of methylmercury (MeHg) in the site showed that MeHg and %MeHg in pore water corresponds well with maxima for sulfide, Fe and Mn suggesting mercury methylation as probably coupled with sulfate, Fe and Mn reduction in sediments. Our results showed that thin-layer capping of active sorbents AC and zeolite, in combination with passive sand caps, are potential remediation strategy for sediments contaminated with heavy metals.

• Geomechanics and Engineering
• /
• v.14 no.5
• /
• pp.479-489
• /
• 2018

In this paper, a comparative study of the effects of soil modelling on the interaction between tunnelling in soft soil and adjacent piled structure is presented. Several three-dimensional finite element analyses are performed to study the deformation of pile caps and piles as well as tunnel internal forces during the construction of an underground tunnel. The soil is modelled by two material models: the simple, yet approximate Mohr Coulomb (MC) yield criterion; and the complex, but reasonable hardening soil (HS) model with hyperbolic relation between stress and strain. For the former model, two different values of the soil stiffness modulus ($E_{50}$ or $E_{ur}$) as well as two profiles of stiffness variation with depth (constant and linearly increasing) were used in attempts to improve its prediction. As these four attempts did not succeed, a hybrid representation in which the hardening soil is used for soil located at the highly-strained zones while the Mohr Coulomb model is utilized elsewhere was investigated. This hybrid representation, which is a compromise between rigorous and simple solutions yielded results that compare well with those of the hardening soil model. The compared results include pile cap movements, pile deformation, and tunnel internal forces. Problem symmetry is utilized and, therefore, one symmetric half of the soil medium, the tunnel boring machine, the face pressure, the final tunnel lining, the pile caps, and the piles are modelled in several construction phases.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.3
• /
• pp.19-22
• /
• 2017

Purpose - To control exorbitant interest rates, implementation of an interest rate ceiling is a standard practice in microfinance. However, there are pros and cons of such market intervention. Hence, the aim of this short note is to highlight issues and challenges regarding the interest rate cap in microfinance, both from the perspective of clients and institutions. Research design, data, and methodology - While the nature of this short note is explanatory and descriptive, the research methodology used relevant data from the MixMarket and Microcredit Regulatory Authority (MRA) annual reports in Bangladesh. Results - We argue that an interest rate ceiling is detrimental both for the clients and microfinance institutions (MFIs). This market intervention substantially reduces the outreach of MFIs and clients are most likely to pay a higher price in the long-run. Additionally, an interest rate cap also puts severe pressure on new-born and high-cost MFIs to cope with the interest rate ceiling. Conclusions - Although market intervention may be necessary in the short-run, it should not be the ultimate solution to abate high interest in microfinance. Understanding the operational dynamics of MFIs, as well as promoting productivity, efficiency and competition could help to lower the interest rates.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.201-212
• /
• 2003

This study aims to improve the comfort and fit of womens swimsuits. Based on the results of the survey, trial suits were designed. In terms of the breast cap, there are five variations based on the feature, size, and thickness and two variations according to the connection mode of the cap. Total 17 trial swimsuits were made, ease of movement and wearing comfort were evaluated. The results of this study were as follows: 1. In terms of movement according to the type of breast cap, the round type shelved much less movement than the triangular type at the lower part of the cap. According to size, the cap that was manufactured on the basis of brassiere cup size showed much less movement than the ordinary cap size in the same round type of cap. In terms of the connection mode between breast caps and swimsuits, there was less cap movement when they were connected by power nets compared to the ordinary models which were connected by conventional rope. 2. Analysis of the differences in wearing comfort. The round type proved to be more convenient than the triangular type at the lower circumference of the caps, the power net collection was rated more positively by the respondents.

• Journal of the Korean Society of Costume
• /
• v.56 no.8 s.108
• /
• pp.60-73
• /
• 2006

This study analyzes the Baekche official costume system, including the dress, cap and belt systems, by relating documentary records with the results of excavations. The study shows that the system differed depending on the time. A system of dress based on official ranks was instituted during the region of King Goi in the third century. The rap amd belt systems were begun in the first half of sixth century The official costume system, as recorded in the Chinese history $Sus{\u{o}}$, included many subdivisions of cap colors, which followed belt colors. According to $Gudangs{\u{o}}$, dress and cap systems changed in the seventh century. The official costume consisted of a $jacket(j{\u{o}}gori)$, trousers(baji), and coat(po). The coat had wide sleeves and reached below knees. Its collar had straight neckline. Officials of all rank wore silk caps and belts of matching colors. Officials above sixth rank used silver flower decorations on their caps. Officials wore wide-crouch trousers and generally adjusted the hems of the trousers, but this practice stopped in the sixth century. Officials wore shoes or boots depending on occasion. From a historical viewpoint, Baekche is important for having been the first Korean kingdom to establish a government organization. The salient feature of the system of organization established in A.D. 260(the twenty-seventh year of the region of King Goi) was the application of different colors to identify different ranks.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.117-117
• /
• 2017

The onion (Allium cepa L.) is the most widely cultivated species of the genus Allium, especially it has been valued because of the pungent flavor and aroma. Allium species including onion has very large genome sizes ranging from approximately 10 to 20 Gbp, which have complicated genomic studies and precluded genome sequencing until recently. A population of 186 F2 individuals derived from a cross of 'Umjinara' ${\times}$ 'Sinsunhwang' and the two parental lines were used for this study. For the development of framework map, various types of markers including SSRs, RAPD, SNPs, and CAPS makers have been used for polymorphism test. Especially, a lot of SNP and CAPS loci were developed from the onion transcriptome sequence by RNASEQ of two parental lines. The GBS libraries have been constructed based on a modified protocol from Poland Lab using a two-enzyme system. We have been developing markers showing polymorphism between two parental lines, and genotyping for all F2 individuals were finished for a number of polymorphic markers. For the construction of GBS libraries, a set of 192 barcoded adapters were generated from complementary oligonucleotides with XhoI overhang sequence and unique barcodes of length 4-8 bp and they have been tested using two parental linesto determine the optimum conditions for GBS analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.91-102
• /
• 2008

Nondestructive testing techniques have been historically and commonly used to evaluate the quality of existing concrete structures. The techniques utilized included visual inspection, hammer sounding, Schmidt hammer rebounding, and ultrasonic pulse velocity testing including tomographic imaging. Results of the nondestructive tests were used to determine areas to be tested with local destructive tests. These tests included concrete compressive strengths, chloride testing, and petrographic testing. The overall results indicate that inside core of each of the pier caps are healthy. On all of the pier caps, extensive exterior concrete layer rehabilitation needs to be completed. This paper shows the application and interpretation of common nondestructive testing techniques and the consequent repair, rehabilitation, maintenance decisions and safety assesment.

• Journal of Fashion Business
• /
• v.24 no.6
• /
• pp.80-88
• /
• 2020

This study, by analyzing previous studies, aimed to understand how 3D printing technology is applied and utilized in the fashion industry and to contribute to encouraging further studies on 3D printing technology in the fashion sector and suggesting proper ways for designing such studies. Firstly, 47 papers were selected from all literature concerning 3D printing technology published in 15 journals of fashion and design since 2013. Afterwards, these papers were analyzed with regard to the frequency, topics or sectors, and purposes or types of studies shown by outcomes. Results were as follows: First, the number of papers on 3D printing technology published in the journals was counted according to the year, which showed that this number increased rapidly after 2015 for about 3 years. Especially in the year 2016, this increase was quite notable. Although a little decrease in this number was found afterwards, a steady increase was highly expected. Out of the 8 journals, Journal of The Korean Society of Fashion Design had the maximum papers. Regarding areas of studies, works on designing and development of products were most common. Finally, regarding the purpose of studies, those suggesting or presenting apparel were predominant. Product items included clothes, shoes, and caps. Studies on caps mostly covered designing the products. Studies on clothes aimed at designing, characteristics of construction, and case study. However, there were very few works on 3D printing technology as an alternative material or composition of clothing.