• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.389-409
• /
• 1990

As a principal design of advanced CANDU fuel bundle, CANDU-KF39, CANDU-KF40 and CANDU-KF43 fuel bundles were proposed and evaluated with respect to the operating conditions of the CANDU-6 reactor of Wolsung Unit-1. From the results, the advanced fuel bundles show to be improved economical and technical benefits compared with the current 37-element bundle. Especially, it was appeared that the KF-39 fuel bundle has more benefits of the safety, technical and economical aspects of Wolsung Unit-1 rather than those of the KF-40 and KF-43 fuel bundles.

• Journal of the KSME
• /
• v.33 no.5
• /
• pp.449-455
• /
• 1993

지금까지의 CANDU 사고이력과 관련된 문제점을 살펴보면 핵연료 채널의 부적절한 설계 및 설치 그리고 부적절한 압력관 가동조건 등에 많은 문제점이 있었다. 이러한 의미에서 CANDU의 안전성은 압력관의 건전성으로부터 확보된다 하여도 과언이 아니다. 그러나 CANDU에서 차지 하는 중요성에 비추어 압력관의 사용환경은 매우 열약하다. 따라서 가동중 압력관 건전성 위협 요인에 대한 정기적인 검사, 시험 및 평가는 CANDU 안전성확보의 첫걸음이 된다. 특히 건전 성평가에 필요한 주요자료가 압력관 인출시험결과로부터 확보됨을 고려할 때 압력관 인출시험을 국내에서 수행할 수 있는 능력을 확보하는 것 또한 우리에게 부과된 과제라 할 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.170-170
• /
• 2001

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.426-441
• /
• 2003

A reactor inlet header break experiment, B9401, performed in the RD-14M multi channel test facility was analyzed using RELAP5/MOD3.2 and RELAP5/CANDU[1]. The RELAP5 has been developed for the use in the analysis of the transient behavior of the pressurized water reactor. A recent study showed that the RELAP5 could be feasible even for the simulation of the thermal hydraulic behavior of CANDU reactors. However, some deficiencies in the prediction of fuel sheath temperature and transient behavior in athe headers were identified in the RELAP5 assessments. The RELAP5/CANDU has been developing to resolve the deficiencies in the RELAP5 and to improve the predictability of the thermal-hydraulic behaviors of the CANDU reactors. In the RELAP5/CANDU, critical heat flux model, horizontal flow regime map, heat transfer model in horizontal channel, etc. were modified or added to the RELAP5/MOD3.2. This study aims to identify the applicability of both codes, in particular, in the multi-channel simulation of the CANDU reactors. The RELAP5/MOD3.2 and the RELAP5/CANDU analyses demonstrate the code's capability to predict reasonably the major phenomena occurred during the transient. The thermal-hydraulic behaviors of both codes are almost identical, however, the RELAP5/CANDU predicts better the heater sheath temperature than the RELAP5/MOD3.2. Pressure differences between headers govern the flow characteristics through the heated sections, particularly after the ECI. In determining header pressure, there are many uncertainties arisen from the complicated effects including steady state pressure distribution. Therefore, it would be concluded that further works are required to reduce these uncertainties, and consequently predict appropriately thermal-hydraulic behaviors in the reactor coolant system during LOCA analyses.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.183-183
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.62-62
• /
• 2003

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.687-700
• /
• 1995

The thermal-hydraulic transient analysis of the proposed CANDU-9 plant was peformed. Several major transients ore analyzed if they meet the heat transport system design requirements. The proposed heat transport system configuration and the preliminary sizes of system equipment are justified by analysis in terms of the fuel integrity and the high system pressure limit during transients. The compliance with AECB R-77 requirements for CANDU-9 reactor was estimated. The analysis results showed that for each postulated accident the peak pressure values in the reactor headers are within the acceptance criteria given in ASME code requirements and the fuel overheating is prevented. One pump start-up during the reactor start-up operation was analyzed to investigate the How reversal through the fuel channel, which is specific in the proposed CANDU-9 plant.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.561-569
• /
• 1993

DOT4.2-QAD-CG coupling method was used to analyze the dose rates outside the side and the bottom shield system of CANDU 6 plant. The average dose rates at the main airlock and the new fuel loading area are approximately 6 $\mu$Sv/h as it is required. The calculated dose rates have a good agreement with the measurements at the operating CANDU 6 plant. The method used in this paper can be applied to the radiation shielding analysis of Wolsong 2, 3, and 4 CANDU 6 type plants which will be constructed in the near future.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.213-218
• /
• 1996

A simulation model for the transient behavior of CANDU U-tube steam generator(UTSG) has been developed for application to the simulation of operational transient behavior of CANDU nuclear power plant. For application to CANDU UTSG. tile design characteristics of CANDU UTSG such as Wolsong Units, feedwater inlet near the tube sheet. is approximated. For realistic prediction of thermal hydraulic behavior of and tube bundle region is divided into two separate control volumes, subcooled region and saturated region. and the variation of thermal hydraulic properties within a control volume is considered. Test results for typical CANDU operational transient case show reasonable transient behavior of steam generator and considered to be applicable to the simulation of overall plant.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.875-882
• /
• 2014

In terms of safety and the efficient management of spent fuel storage, detecting failed fuel is one of the most important tasks in a CANada Deuterium Uranium (CANDU) reactor operation. It has been successfully demonstrated that in a CANDU reactor, on-power failed fuel detection and location systems, along with alarm area gamma monitors, can detect and locate defective and suspect fuel bundles before discharging them from the reactor to the spent fuel storage bay. In the reception bay, however, only visual inspection has been used to identify suspect bundles. Gaseous fission product and delayed neutron monitoring systems cannot precisely distinguish failed fuel elements from each fuel bundle. This study reports the use of a sipping system in a CANDU reactor for the integrity assessment of spent fuel bundles. The integrity assessment of spent fuel bundles using this sipping system has shown promise as a nondestructive test for detecting a defective fuel bundle in a CANDU reactor.