• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.94-100
• /
• 2010

연구목적: 본 연구는 상악과 하악의 각 치아부위에 $Lava^{TM}$ All-Ceramic System을 이용하여 지르코니아 전부도재관을 제작하고 각각의 파절강도를 알아보고자 하였다. 연구방법:중절치와 견치는 절단연의 삭제량을 2.0 mm, 소구치와 대구치는 교합면의 삭제량을 1.5 mm, 그리고 축면 경사도는 $8^{\circ}$로하여모두8군의 실험군을 설정하였다. 금속 다이와 지르코니아 도재관을 제작한 후 레진시멘트 (Rely $X^{TM}$ Unicem)를 이용하여 합착하고 만능시험기상에서 치아 장축에 $30^{\circ}$경사지게 하여 중절치와 견치에 제작된 지르코니아 도재관은 절단연 중앙 부위에 하중을 가하였고, 소구치와 대구치에 제작된 지르코니아 도재관은 기능교두의 협설측 경사면 중앙부위에 하중이 가해지도록 한 후 파절강도를 측정하였다. 결과:1. 지르코니아 도재관의 평균 파절강도는 하악 제1대구치에서 2963 N으로 가장 높게 나타났으며, 하악 중절치에서 1035 N으로 가장 낮게 나타났다. 2. 지르코니아 도재관과 IPS Empress 도재관과의 평균 파절강도는 모든 치아에서 지르코니아 도재관이 더 크게 나타났다. 3. 지르코니아 도재관의 파절 양상은 하중이 가해진 중앙 부위에서 치아 장축으로 수직적인 파절상을 보였다. 4. 상악과 하악의 동일 부위에 제작된 지르코니아 도재관의 파절강도는 소구치에서 상악이 하악에 비하여 낮은 것으로 나타났으며 (P< .05), 다른 부위에서는 유의한 차이가 없었다 (P> .05). 결론: 본 실험의 결과로 지르코니아 도재관은 임상에서 활용하기에 만족할 만한 강도를 갖고 있음을 알 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권9호
• /
• pp.5107-5110
• /
• 2013

Background: Among women with haematuria, defining individuals under high risk for bladder cancer based on reproductive factors prior to cystoscopy would be of great benefit in the management of this condition. The aim of this study was to compare age and reproductive factors such as menopausal status, parity, age at first delivery and age at the last delivery between women who have haematuria with or without bladder cancer. Materials and Methods: A total of 463 patients underwent diagnostic cystoscopy in D$\ddot{u}$zce University Faculty of Medicine between 1 June 2008 and 1 June 2013. Female patients who presented with persistent microscopic or macroscopic haematuria and underwent standard evaluation for haematuria including urinalysis, urine culture, urine cytology, urinary tract imaging with excretory urography or computerized tomography with contrast enhancement and endoscopic evaluation of the urethra and bladder were included in this study. Exclusion criteria were tobacco use and high risk occupations for bladder cancer such as textile, dry cleaning, painting and etc. Forteen women had hematuria due to benign conditions, and 18 due to bladder cancer. Data were retrospectively retrieved from the medical records of Duzce University Hospital. Results: Patients with haematuria due to benign reasons did not significantly differ from patients who were found to have bladder cancer in terms of age (p=0.28), menopausal status (p=0.29), mean parity (p=0.38), being nulliparous (p=0.57), parity ${\geq}3$ (p=0.22), age ${\leq}18$ years at first delivery (p=1.00), age ${\geq}30$ years at last delivery (p=0.26), age ${\geq}35$ years at last delivery (p=0.23) and percentage of the patients with advanced age (${\geq}65$ years) (p=0.18). Conclusions: It is difficult to predict a high risk for developing bladder cancer in women with haematuria based solely on reproductive factors.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• 임상간호연구
• /
• 제26권2호
• /
• pp.207-216
• /
• 2020

Purpose: The purpose of this study was to investigate the motor subtypes of delirium in patients in a Surgical Intensive Care Unit (SICU), and identify the factors related to the characteristics of patients according to the motor subtypes of delirium. Methods: Data were collected in the SICU of a tertiary hospital in ^⁎ city from October 2018 to June 2019. Delirium was detected using the Confusion Assessment Method for the ICU (CAM-ICU) and motor subtypes of delirium were measured with the Delirium Motor Subtype Scale (DMSS)-4. Patients' characteristics were obtained by using the electronic medical records. Descriptive statistics were used to analyze the data. Results: Among 1,112 patients, 172 patients showed delirium (15.5%). After excluding dementia patients and patients refusing to participate in the study, 126 patients included in the final analysis. Delirium patients were classified as hyperactive delirium (32.5%), hypoactive delirium (42.9%), mixed delirium (11.9%), and non-motor subtype delirium (12.7%). Conclusion: The study results suggest that hypoactive delirium is the most prevalent motor subtype of delirium in SICU. More application of ventilators, more administration of sedatives, more use of catheters, and higher nursing severity were reported for hypoactive delirium cases than hyperactive ones. Therefore, it is necessary to assess early the motor subtypes of delirium using structured tools and develop appropriate nursing interventions suitable for each subtype of delirium.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권1호
• /
• pp.15-22
• /
• 2017

인터넷 기술이 급속도로 발전함에 따라서 다양한 소셜 네트워크 서비스들이 나타나고 있다. 특히 스마트 기기들이 발전함에 따라서 소셜 네트워크 상에는 멀티미디어 콘텐츠가 넘쳐나고 있다. 그러나 불법적 목적을 가진 사용자에 의해 발생하는 범죄도 증가하면서 멀티미디어 포렌식을 이용한 콘텐츠 보호 및 불법 사용 차단의 필요성이 사회적으로 대두되고 있다. 본 논문에서는 멀티미디어 포렌식 기술의 하나로 디지털 동영상 획득 장치 판별을 위한 포렌식 기술을 제안한다. 먼저 모폴로지 필터링을 이용한 센서 패턴 노이즈 추출하는 방법을 제안한다. 이를 이용하여 참조 장치에서 촬영한 참조 동영상의 센서 패턴 노이즈를 추정하고, 검사 동영상에서 센서 패턴 노이즈를 추출한다. 그리고 두 센서 패턴 노이즈 사이의 유사성 계산을 통하여 검사 동영상이 참조 장치로 촬영을 했는지 판별을 수행한다. 제안한 기술의 성능 분석을 위하여 DSLR 카메라, 콤팩트 카메라, 캠코더, 액션캠 및 스마트폰 등을 포함한 총 30대의 장치에 대하여 개발한 알고리즘에 대한 정량적 성능 분석을 수행하였고, 그 결과 96%의 판별 정확도를 달성하였다.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• 대한소아치과학회지
• /
• 제46권3호
• /
• pp.301-309
• /
• 2019

이 연구에서는 휴대용 정량광형광기인 Q-scan을 이용한 구강관리교육이 어린이가 구강관리를 하는데 있어서 얼마나 효과적인 지를 평가하였다. 6 - 12세의 어린이 중 치아우식위험도 검사결과 중위험 또는 고위험도로 분류된 58명을 대상으로 하였다. 대상자들을 Q-scan 사용군(I군)과 대조군(II군)의 두 군으로 나누고, Qray-cam을 이용하여 simple plaque score (SPS)를 평가한 뒤, 동일한 구강관리교육을 시행하였다. I군에게는 추가적으로 Q-scan을 매일 사용하게 하였다. 한 달 뒤 두 군 모두 SPS와 Cariview score를 재평가하였다. 두 군 모두 구강관리교육 후 Cariview score 및 SPS의 유의한 감소가 있었다(p < 0.001). 두 군 간의 변화된 Cariview score 차이는 유의하였고(p = 0.022), I군에서 II군 대비 감소폭이 더 컸으며, SPS 차이는 유의하지 않았다(p = 0.937). 어린이의 구강위생상태를 개선시키는 것은 기존의 구강관리교육만으로도 효과적이었다고 볼 수 있으나, 가정에서 휴대용 정량광형광기를 추가로 사용하는 것은 구강관리에 대한 어린이들의 행동변화를 유도하는 데에 도움을 주므로 더 효과적인 방법으로 볼 수 있다.

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.71-78
• /
• 2021

완전무치악 환자한테 처음으로 시도되었던 임플란트 보철치료는 현재는 단일치아 상실된 경우까지 그 활용범위가 넓어졌으며, 임플란트 보철치료는 현대 치과에서는 거의 필수적인 치료방법으로 자리매김 하였다. 임플란트 보철물을 제작하는데 사용되는 재료도 초기에 비해 다양해졌는데, 그 중 하나가 고기능성 폴리머의 적용이다. 예전부터 의과에서 많이 사용되어 왔던 고기능성 폴리머를 치과에서도 시도하는 빈도가 점점 늘어나고 있다. 이에 고기능성 폴리머를 구치부 임플란트 지대주로 사용한 3가지 증례를 보고하고자 한다. 첫번째 증례는 하악 좌측 제2소구치가 상실된 부위에 PEKK 지대주 및 PFG 크라운(시멘트-나사-유지형)을 제작, 장착하였으며, 두번째 증례는 상실된 상악 좌측 제1대구치 부위에 PEKK 지대주 및 monolithic zirconia 크라운(시멘트-나사-유지형)을 제작, 장착하였으며, 마지막 증례는 상악 우측 제1,2 대구치 상실부위에 PEKK 지대주 및 splinted PFM 크라운(시멘트-나사-유지형)을 제작하여 장착하였다. 4년의 추적 관찰 결과 상기 환자 모두 심미적 및 기능적으로 만족스러운 결과를 얻었기에 증례를 보고하고자 한다.