• Journal of Gastric Cancer
• /
• 제24권3호
• /
• pp.327-340
• /
• 2024

Purpose: Results of initial endoscopic biopsy of gastric lesions often differ from those of the final pathological diagnosis. We evaluated whether an artificial intelligence-based gastric lesion detection and diagnostic system, ENdoscopy as AI-powered Device Computer Aided Diagnosis for Gastroscopy (ENAD CAD-G), could reduce this discrepancy. Materials and Methods: We retrospectively collected 24,948 endoscopic images of early gastric cancers (EGCs), dysplasia, and benign lesions from 9,892 patients who underwent esophagogastroduodenoscopy between 2011 and 2021. The diagnostic performance of ENAD CAD-G was evaluated using the following real-world datasets: patients referred from community clinics with initial biopsy results of atypia (n=154), participants who underwent endoscopic resection for neoplasms (Internal video set, n=140), and participants who underwent endoscopy for screening or suspicion of gastric neoplasm referred from community clinics (External video set, n=296). Results: ENAD CAD-G classified the referred gastric lesions of atypia into EGC (accuracy, 82.47%; 95% confidence interval [CI], 76.46%-88.47%), dysplasia (88.31%; 83.24%-93.39%), and benign lesions (83.12%; 77.20%-89.03%). In the Internal video set, ENAD CAD-G identified dysplasia and EGC with diagnostic accuracies of 88.57% (95% CI, 83.30%-93.84%) and 91.43% (86.79%-96.07%), respectively, compared with an accuracy of 60.71% (52.62%-68.80%) for the initial biopsy results (P<0.001). In the External video set, ENAD CAD-G classified EGC, dysplasia, and benign lesions with diagnostic accuracies of 87.50% (83.73%-91.27%), 90.54% (87.21%-93.87%), and 88.85% (85.27%-92.44%), respectively. Conclusions: ENAD CAD-G is superior to initial biopsy for the detection and diagnosis of gastric lesions that require endoscopic resection. ENAD CAD-G can assist community endoscopists in identifying gastric lesions that require endoscopic resection.

• 대한토목학회논문집
• /
• 제31권3D호
• /
• pp.441-450
• /
• 2011

최근의 건설공사는 대형화되고 있고 복잡한 시설물들을 포함하고 있으며, 공사비와 공기관리를 위해 프로젝트관리시스템(PMIS)을 적용하고 있다. 국토해양부에서도 산하 공공 발주공사의 사업관리를 위해 건설 CALS 시스템을 사용하고 있다. 본 연구에서는 현재 사용중에 있는 건설 CALS 시스템의 세부 기능 분석을 통해 적용 문제점을 도출하여 실무 활용성을 확대할 수 있는 개선 기능을 제시하고 있다. 국토해양부 산하 5개청에서 발주되는 공사는 모두 건설 CALS 시스템을 PMIS 대용으로 사용하고 있으나, 사용 기능은 제한적이고 소수의 실무진에 의해서만 활용되고 있고, 특히 CALS에 사용되는 각종 공사정보가 단편적 수치 정보로 구성되어 관리자의 정보 이해도 및 수준별 활용도가 저하되어 있는 것으로 파악되었다. 본 연구에서는 CALS 시스템의 활용성 확대를 위한 새로운 기능들의 구성방안과 정보시각화를 위해 세부 기능별로 4D 객체 연동 방안을 제시하고 있다.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2000년도 종합학술대회발표논문집
• /
• pp.137-149
• /
• 2000

ㆍ STEP-NC : ISO 14649 부문 - CAO/CAPP/CAM과 다양한 CNC application을 대상 - CAD/CAM 도메인과 CNC를 연결시킴으로서 상위 정보와 shop floor 정보의 information highway 개통 의의 - IMS Project의 일환으로 Aachen대학을 중심으로 현재는 문법의 제정 단계 - 수년내에 ISO 14649는 새로운 CNC 표준언어로 확정 확실시 ㆍ STEP-NC: 제어기 부문 - ISO 14649 정보를 활용하면 다양한 지적기능을 보유하는 자율제어 시스템 구축가능 - 개방형 제어구조가 권역별로 제시되고 구현되고 있는 단계 - ISO 14649 정보에 기반한 지적제어기는 아직 미달의 연구과제 ㆍ 파급효과 및 대응 (국제적인 기술경쟁력 확보) - CAD/CAM 시스템에의 ISO 14649 포용 필요 - CNC 제어기의 ISO 14649 판독 능력 필요 - ISO 14649에 기반 한 지적제어기의 구현에 관한 연구 필요 - 적극적인 International Interface 필요 - 방대한 연구: 산학연의 연구 개발과 국가적인 정책 배려 필요

• 한국디지털건축인테리어학회논문집
• /
• 제1권1호
• /
• pp.39-45
• /
• 2001

The purpose of this study is to suggest the possibility which can use as instrument of design by CAD system. And it proposes how makes 3D object model through 2D Drawings in Design process. This study has review the 'Study Drawing' in design process, and application method of CAD as the Architectural Design Integration System. The Architecture can work in ani of the traditional 2D representations as well as in 3D and immediate visual feedback of his work in isometric and perspective projrctions.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2008년도 춘계학술대회
• /
• pp.428-433
• /
• 2008

The online advertising industry's business model undertakes the change from CPM (cost-per-mille)-based to CPC (cost-per-click)-based. However, due to the problem of 'Click Fraud', CPA (cost-per-action) has been regarded as a new step. For CPA, publishers need to get information after a user clicks an advertisement. Therefore, in CPA, the key is to get Conversion Action Data (CAD). This paper introduces two existing mechanisms for getting CAD, compare their characteristics, and analyze their limitations. Then the two new mechanisms are introduced and their requirements and feasibility are analyzed. Lastly, we compare the existing two and the new two mechanisms, and point out each mechanism's business possibility, value and Application Area. This paper will help publishers choose the most appropriate mechanism on the basis of their situation.

• 융복합기술연구소 논문집
• /
• 제5권2호
• /
• pp.33-36
• /
• 2015

In this paper, the development history of random packings for several generations was briefly introduced. We demonstrate the application of 3D printing to the fabrication of Pall rings, directly using computer aided design (CAD) models. The CAD was used to design Pall rings with different number of blades. The models were then printed by using UV curing of acrylonitrile-butadiene-styrene (ABS) resins. The results show that 3D printing is a promising method for producing precisely controlled packing materials. It is also expected that 3D printing is helpful for the fundamental studies of highly efficient packing materials with complex geometrical shapes.

• 대한산업공학회지
• /
• 제12권2호
• /
• pp.13-19
• /
• 1986

The purpose of this paper is to develop a 3-dimensional human model, an ergonomic CAD (Computer-Aided Design) system which would be very helphul in ergonomic design. An interactive program was developed, in which a user could change layout, body size, skin volume, and posture of the human model. As an example, effect of inclination of a steering wheel on visibility of a display panel was demonstrated. he result showed that ergonomic design can be aided by the 3-dimensional human model, and by the perspective graph by which design and evaluation process can be carried out more effectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.676-679
• /
• 2001

A low-temperature cofired-ceramic (LTCC) multi-layer ceramic (MLC) band-pass filter (BPF) is presented, which has the benefits of low cost and small size. The BPF is designed for a IMT-2000 handset. The computer-aided design technology is also presented. The BPF with an attenuation pole at below the passband has been discussed and realized. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The frequency characteristics of the LTCC-MLC BPF is well acceptable for IMT-2000 application.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.229-248
• /
• 2014

In this paper, the development of a new optimization software for finite element model updating of engineering structures titled as FemUP is described. The program is used for computational FEM model updating of structures depending on modal testing results. This paper deals with the FE model updating procedure carried out in FemUP. The theoretical exposition on FE model updating and optimization techniques is presented. The related issues including the objective function, constraint function, different residuals and possible parameters for FE model updating are investigated. The issues of updating process adopted in FemUP are discussed. The ideas of optimization to be used in FE model updating application are explained. The algorithm of Sequential Quadratic Programming (SQP) is explored which will be used to solve the optimization problem. The possibilities of the program are demonstrated with a three dimensional steel frame model. As a result of this study, it can be said that SQP algorithm is very effective in model updating procedure.