• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.45-53
• /
• 2020

Purpose: The purpose of this study was to investigate the current status and satisfaction of dental CAD/CAM system. Methods: A survey of dental technicians was conducted and a total of 353 responses were used for analysis. The satisfaction difference according to career was analyzed by ANOVA and tukey HSD (α = .05). Results: Satisfaction with the design program was 3.64 ± .86, the highest among all items. On the other hand, the satisfaction with price was 2.75 ± 1.02, which was the lowest. The difference according to career was statistically significant in the following items. Frequent breakdown, single crown margin, bridge crown margin, retentivity, price, A/S, equipment training (p<.05). Conclusion: As the materials applied to dental CAD/CAM are expanding and the types of prostheses are diversified, the use rate of CAD/CAM is continuously increasing. The dental CAD/CAM system will need to be improved in a way that will satisfy all patients, dentists and dental technicians.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.188-198
• /
• 2018

Purpose: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. Materials and methods: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. Results: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. Conclusion: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.44-50
• /
• 2006

Cam mechanisms are one of the most popular devices for generating irregular motion and are widely used in many automatic equipments, such as textile machinery, internal combustion engines and other automatic devices. In order to obtain the positive motion of follower by rotating cam, its shape should be correctly designed and manufactured. In present paper, a CAD/CAM system is developed for shape design of disk cams using relative velocity method and NC code generation using the biarc curve interpolation. And, a disk cam is successfully manufactured by the developed CAD/CAM system. Thus, it is shown that the developed CAD/CAM system can be used for high precision cam profile CNC grinding machine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1146-1149
• /
• 1995

The CAD/CAM System for deep drawing transfer die in mechanical press proess has been developed. The developed CAD system can generate the drawing of drawing of transfer die in mechanical press. Using these results from CAD system, it can generate the NC data to machine die's elements on the CAD system. This system can reduce design man-hours and human errors. In order to construct the system, it is used to automate the design process using knowledge base system. The developed system is based on the knowledge base system which is involved a lot of expert's technology in the practice filed. Using AutoLISP language under the AutoCAD system, CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and mannufacturer in this field.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.15-18
• /
• 1993

1970년대 초반부터 조선공업에 이용되기 시작한 CAD/CAM시스템은 설계단계에서 생산단계까지 그 사용이 보편화되고 있으며, 그 적용범위도 계속 넓어져 가고 있다.그러나 이들 CAD/CAM시스템들은 폐쇄형 구조를 가지고 있기 때문에 각종 설계관련 응용프로그램과의 접속에 어려움을 가지고 있다. 현재 개발되고 있는 CAD/CAM은 개방형 구조를 갖고, 기존환경과 접목이 가능한 통합시스템 개발로 나아가고 있다. 이 글에서는 최근 대두되고 있는객체지향기술을 실제 응용분야에 적용할 수 있고 개방형 구조를 갖는, 객체지향형 모델러인 AICS에 관해서 소개하였다.

• IE interfaces
• /
• v.8 no.3
• /
• pp.213-220
• /
• 1995

공정설계는 설계와 가공에 대한 지식을 갖고 있는 사람이 부품설계 도면의 정보를 이용, 생산 현장에서 소재를 부품으로 가공하기 위하여 필요한 가공정보들을 수집, 검토하여 상세한 작업지시를 준비하는 일련의 활동이라고 할 수 있다. 따라서 공정설계는 제품을 경제적, 효율적으로 생산하는데 필요한 체계적인 결정방식이며, 설계와 가공사이의 정보흐름을 원활하게 하여 제조공정상의 교량역할을 하는 핵심적인 부분이므로, 본 논문에서는 첨단생산시스템을 구현하기 위한 차세대가공시스템의 소과제중 하나인 "지적공정계획기술" 과제에서 기존에 상용화된 CAD/CAM(Compu-ter Aided Design / Manufacturing)시스템을 이용하여 설계와 가공의 정보를 체계화하고 지식 베이스화하여 설계정보가 생산현장까지 이어질 수 있도록 개발중인 컴퓨터를 이용한 공정설계자동화시스템(CAPP : Computer Aided Process Planning)에 대하여 기술하고자 한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.128-137
• /
• 2020

Over the last 30 years, the use of chairside computer-aided design (CAD) and computer-aided manufacturing (CAM) systems has evolved and has become increasingly popular in dentistry. Although CAD/CAM restorations have been used in the anterior dentition, satisfying the esthetic requirements of clinicians and patients, where the restorations are limited to the chairside, remains a challenge. To reproduce multi-shades of CAD/CAM restorations in the clinic, a preliminary experiment to express several shades on A2 lithium disilicate (LS2) blocks using a staining kit was performed. After measurement of the CIE L^*a^*b^* value of specimens, it was compared with that of the commercial shade guide. This report presents two cases with individual customization of shade and surface characterization of the CAD/CAM restorations using predictable methods based on the preliminary experimental data. The anatomical shape of restoration was obtained from 'copy and paste technique' and 'mirror image acquisition technique'. All treatment procedures and fabrication of restorations performed in this report were executed in the clinic itself.

• Journal of the KSME
• /
• v.33 no.4
• /
• pp.330-342
• /
• 1993

CAD/CAM이 국내에 도입되기 시작한 것은 70년대 후반이나, 본격적으로 보급되어 사용되기 시작한 것은 80년대 초부터라 하겠다. 도입초기에는 설계의 획기적인 변화를 약속해주는 새로운 기술로 각광을 받아오고, 또한 몇몇 분야에서는 그만한 가능성을 보여주기도 하였으나, 설계실 에서 컴퓨터가 제도판을 밀어내기 시작한지 약 10년이 지난 이 시점에서 돌이켜보건대 과연 CAD/CAM이 초기의 커다란 기대에 부응하는 성과를 올리고 있는 가에는 의문이 가는 것도 부 인할 수 없는 사실이다. 이는, 여러 가지 해석이 있을 수 있겠으나 필자의 견해로는 다음의 4가 지에 주로 기인한다. 1) CAD/CAM시스템 자체의 기능 및 성능 부족 2) 이기종 시스템간의 인터페이스 기술의 부족 3) 산업현장의 설계표준, 정보관리체계 등의 기반환경 미비 4) 적용 대상에의 전용화(customizing)기술의 부족 이 글에서는 이러한 원인들의 부분적인 해결을 위해서 필자가 속해있는 회사에서 수행한 노력 들을 몇 가지 사례를 통하여 소개하고자 한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.79-88
• /
• 1998

This study deals with the development of CAM system which can machine and measure any shape of mold and die by machining center and coordinate measureing machine . The overall goal of the CAM system is to achieve the mold and die machining , from digitizing through to final cutting. The hardware of the system comprises PC and machining center. CMM. There are three steps in the mold and die machining. (1) measuring of physical model by the CMM, (2) geometric modeling by the CAD system, (3) generation of NC code by the tool path compensated for tool radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.33-39
• /
• 2002

The present so many systems are used by evolution of Program to expel DNC(Direct Numerical Control) Network Infra for many CNC Controller. However, these systems is an inefficiency side in case of mutual connection at a long distance between Server Computer and Machining center Also, the machining center have so many controversial points in data transmission-receiver from the NC data server. So, this thesis well constructed the remote control system from CNC(Computer Numerical Control) Controller to CAD/CAM Server Computer. This system have some kinds of merits. Firstly. the machining center's user can easily use the saved NC data transmission from the CAD/CAM Server Secondly, the remote control is possible without the mutual conversation between the CAD/CAM Server and the machining center.