In solvent extraction, extraction isotherm represents the relation between the equilibrium concentration of metal in the aqueous and organic phase. McCabe-Thiele diagram on which extraction isotherm and operating line are constructed provides valuable information on the mass transfer operation. When the equilibrium constant of a solvent extraction reaction is known, the calculation method to obtain extraction isotherm was introduced. Kresmer equation by which the number of extraction stages can be calculated when the distribution coefficient is constant was introduced.
Solvent extraction behaviors of iron(III) from chloride solution at high ionic strength condition between Alamine336 and TBP were compared by using MaCabe-Thiele diagram. Extraction isotherms of iron by the two extractants were obtained by calculating the equilibrium concentrations of iron in both phases from the initial extraction conditions. In calculating the equilibrium concentration of iron, chemical equilibria in the aqueous phase and mass balance together with the solvent extraction reaction were considered. MaCabe-Thiele diagram of iron by 1M Alamine336 indicated that two extraction stages could lead to complete extraction of 0.5M iron from 3M HCl solution at an A/O ratio of 6/5. The extraction power of 1M Alamine336 was found to be the same as 2-3M TBP. MaCabe-Thiele diagram together with the physical properties of the two extractants indicated that Alamine336 is superior to TBP in extracting ferric iron from chloride solution.
통신 프로그램은 고도의 신뢰성과 기능성, 확장성, 그리고 유지 보수성이 필요하다. 프로그램 테스트의 결과와 McCabe의 Complexity를 측정한 데이타를 가지고 회귀모델을 만들고 그 신뢰성을 분석함으로서 프로그램의 결함과 복잡도의 관련성을 평가한다.본 연구에서 사용한 통신 프로그램은 500개 블록이 59가지 기능을 수행하는 교환 기능 중에서 복잡도가 너무 많아서 통계 처리의 bias가 될 블록을 제외하고 394 블록을 선정하여 SAS에 의해서 통계 분석을 하고 회귀 분석 모델을 설계하였다. t 분포에 의하여 방정식의 유의성 수준을 검증하고 프로그램의 결함수에 가장 큰 영향을 주고 있는 복잡도가 McCabe의 복잡도와 설계 복잡도 임을 밝혀냈다. 이 연구 결과에 의해서 설계 정보 및 유지 보수 정보를 얻을 수 있다. Abstract Switching software requires high reliability, functionality, extendability and maintainability. For doing, software quality model based on MaCabe's complexity measure is investigated. It is experimentally shown using regression analysis the program fault density depends on the complexity and size of the function unit. The software should be verified and tested if it satisfies its requirements with automated analysis tools. In this paper we propose the regression model with the test data.The sample program for the regression model consists of more than 500 blocks, where each block compose of 10 files, which has 59 functions of switching activity.Among them we choose 394 blocks and analyzed for 59 functions by testing tools and SAS package. We developed Regression Analysis Model and evaluated significant of the equation based on McCabe's cyclomatic complexity, block design complexity, design complexity, and integration complexity.The results of our experimental study are that number of fault are under the influence of McCabe's complexity number and design complexity.
This paper aims at providing guidelines enabling productive software construction by offering reusable modules which is used not only for effective maintenance for each step, but also for a re-engineering process after analyzing developed source code. There are four processing steps. The first is to analyze source code. The second is module slicing and clustering using McCabe and BP/Win Tools, The third is to transform the outputs extracted from the business model to reusable modules. The final step is to design repository and to construct a system. In this paper, we applied the fourth step to our case study, which was specified from the first step to the fourth. The specified fourth step contains various things for constructing repository. And the fourth step reanalyzes informal and unstructured information by using reverse engineering tools, in order to provide effective guidelines for productive software maintenance and re-engineering.
Journal of the Korea Academia-Industrial cooperation Society
/
v.11
no.7
/
pp.2654-2660
/
2010
The purpose of this paper is to organize the issues regarding the necessary components of public design in order to provide an outlook of policy guidelines on urban design based on the concept of publicity and user participation. This paper includes an in-depth analysis of CABE in order to suggest communal notions and the values of public design that would enhance the quality of public design. Thus, it can be used as a reference when catalyzing public design regulations and policies in the future. It analyzes the design review and supportive tools for good decision-making of suggested in the CABE case in order to provide an integrated model of public design to overcome the difficulties presented by current approaches of public design. The unity of values, methods, subjects, issues, and places suggested in this paper is the key notion that emphasizes the importance of the integrated model of public design through the cooperation and communication between gents involved in public design process.
Purpose: Community-acquired bacterial enteritis (CABE) is a common problem in developed countries. It is important to understand the epidemiologic changes in bacterial pathogens for prevention and treatment. Therefore, we studied the epidemiologic changes in CABE in Korean children. Methods: A total of 197 hospitalized pediatric patients aged <19 years that presented with dysentery symptoms and showed positive polymerase chain reaction results for bacterial species in stool samples, were enrolled in this study for 10 years (June 2010 to June 2020). We classified patients in phase I (06, 2010-06, 2015) and phase II (07, 2015-06, 2020) and analyzed their epidemiologic and clinical characteristics. Results: The most common pathogens were Campylobacter species (42.6%) and Salmonella species were the second most common pathogens (23.9%). The abundance of pathogens decreased in the following order: Clostridium difficile (9.6%), Shigella (5.6%), and Clostridium perfringens (5.6%). Escherichia coli O157:H7 was found to be the rarest pathogen (2.0%). Campylobacter species showed an increase in the infection rate from 32.1% in phase I to 49.6% in phase II (p=0.0011). Shigella species showed a decline in the infection rate in phase I from 14.1% to 0.0% in phase II (p<0.001). C. difficile and C. perfringens showed an increase in infection rate in phase II compared to phase I, but the difference was not statistically significant. Conclusion: The infection rate of Campylobacter species in CABE has been rising more recently, reaching almost 50%. This study may help establish policies for prevention and treatment of CABE in Korean children.
A study on the solvent extraction for the recovery of Li from lithium-containing waste solution was investigated using $D_2EHPA$ as an extractant. The experimental parameters, such as the pH of the aqueous solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percentage of Li was increased with increasing the equilibrium pH. More than 50% of Li was extracted in eq. pH 6.0 by 20% $D_2EHPA$. From the analysis of McCabe-Thiele diagram, 95% of Li was extracted by four extraction stage at phase ratio(O/A) of 3.0. Stripping of Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 90 ~ 120 g/L of $H_2SO_4$ was effective for the stripping of Li. Finially, Li was concentrated about 11.85 g/L by continuous stripping process, and then lithium carbonate was prepared by precipitation method.
A study has been made of the rccovery of copper (11) by solvent extraction with Alamine336 (Tri-n-oclylamine) as a extractant from hydrochloric etching solutions. The effect of extractant concentrations, hydrochloric acid, chloride Ion concentrations and phase ratio (organiclaqueaus) on copper extraction were studied. Experimental results showed that the concenl~atiano f extractant and the phase ratio strongly influenced the copper extraction, and the extraction percent of capper Increased at higher hydrochloric acid and chloride ion mncmhation. We proposed that the optimum extrachon stages of copper for continuous extraction process by analysidng thc McCabe-Thielc diagram. Stripping of copper from the loaded organic phases wn be accomplished by pure water (H, O) as a dripping reagent effectively. As the tcmpcrature is increased, thc stripping of copper is enhanced.
Journal of Korean Institute of Industrial Engineers
/
v.19
no.3
/
pp.59-70
/
1993
This paper presents the results of experiments which compare the software complexity between programming languages, i.e, FORTRAN IV and FORTRAN 77, PASCAL and C language, respectively. Each experiment is performed to compare the complexity between programs of same problems using Halstead's method based on operator, and McCabe's based on data flow. As the results of 25 test programs experiments, FORTRAN 77 languages shows superiority to FORTRAN IV languages, and C than that of PASCAL languages, in the aspect of the global software complexity.
Journal of The Korean Association of Information Education
/
v.24
no.1
/
pp.11-19
/
2020
Software education is provided for 6th grade students. This study explored the algorithmic composition patterns of elementary school students. After investigating the algorithm for the 6th grade students, the algorithmic pattern of the learner was explored by calculating the cyclomatic complexity of MacCabe based on the structural programming technique. Students often use one or two choice structures to solve problems, which tend to be biased towards the starting and ending points of the problem. It is also passive in the use of selection structures. Algorithm composition depends on visible objects and one's own background. Therefore, in elementary school software education, it is necessary to present the task of thinking about the algorithm structure in the context of the algorithm and the students' experiences in accordance with the algorithm composition pattern.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.