• Resources Recycling
• /
• v.27 no.4
• /
• pp.65-69
• /
• 2018

In solvent extraction, extraction isotherm represents the relation between the equilibrium concentration of metal in the aqueous and organic phase. McCabe-Thiele diagram on which extraction isotherm and operating line are constructed provides valuable information on the mass transfer operation. When the equilibrium constant of a solvent extraction reaction is known, the calculation method to obtain extraction isotherm was introduced. Kresmer equation by which the number of extraction stages can be calculated when the distribution coefficient is constant was introduced.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.29-34
• /
• 2008

Solvent extraction behaviors of iron(III) from chloride solution at high ionic strength condition between Alamine336 and TBP were compared by using MaCabe-Thiele diagram. Extraction isotherms of iron by the two extractants were obtained by calculating the equilibrium concentrations of iron in both phases from the initial extraction conditions. In calculating the equilibrium concentration of iron, chemical equilibria in the aqueous phase and mass balance together with the solvent extraction reaction were considered. MaCabe-Thiele diagram of iron by 1M Alamine336 indicated that two extraction stages could lead to complete extraction of 0.5M iron from 3M HCl solution at an A/O ratio of 6/5. The extraction power of 1M Alamine336 was found to be the same as 2-3M TBP. MaCabe-Thiele diagram together with the physical properties of the two extractants indicated that Alamine336 is superior to TBP in extracting ferric iron from chloride solution.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1282-1287
• /
• 1999

통신 프로그램은 고도의 신뢰성과 기능성, 확장성, 그리고 유지 보수성이 필요하다. 프로그램 테스트의 결과와 McCabe의 Complexity를 측정한 데이타를 가지고 회귀모델을 만들고 그 신뢰성을 분석함으로서 프로그램의 결함과 복잡도의 관련성을 평가한다.본 연구에서 사용한 통신 프로그램은 500개 블록이 59가지 기능을 수행하는 교환 기능 중에서 복잡도가 너무 많아서 통계 처리의 bias가 될 블록을 제외하고 394 블록을 선정하여 SAS에 의해서 통계 분석을 하고 회귀 분석 모델을 설계하였다. t 분포에 의하여 방정식의 유의성 수준을 검증하고 프로그램의 결함수에 가장 큰 영향을 주고 있는 복잡도가 McCabe의 복잡도와 설계 복잡도 임을 밝혀냈다. 이 연구 결과에 의해서 설계 정보 및 유지 보수 정보를 얻을 수 있다. Abstract Switching software requires high reliability, functionality, extendability and maintainability. For doing, software quality model based on MaCabe's complexity measure is investigated. It is experimentally shown using regression analysis the program fault density depends on the complexity and size of the function unit. The software should be verified and tested if it satisfies its requirements with automated analysis tools. In this paper we propose the regression model with the test data.The sample program for the regression model consists of more than 500 blocks, where each block compose of 10 files, which has 59 functions of switching activity.Among them we choose 394 blocks and analyzed for 59 functions by testing tools and SAS package. We developed Regression Analysis Model and evaluated significant of the equation based on McCabe's cyclomatic complexity, block design complexity, design complexity, and integration complexity.The results of our experimental study are that number of fault are under the influence of McCabe's complexity number and design complexity.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.5
• /
• pp.528-535
• /
• 2000

This paper aims at providing guidelines enabling productive software construction by offering reusable modules which is used not only for effective maintenance for each step, but also for a re-engineering process after analyzing developed source code. There are four processing steps. The first is to analyze source code. The second is module slicing and clustering using McCabe and BP/Win Tools, The third is to transform the outputs extracted from the business model to reusable modules. The final step is to design repository and to construct a system. In this paper, we applied the fourth step to our case study, which was specified from the first step to the fourth. The specified fourth step contains various things for constructing repository. And the fourth step reanalyzes informal and unstructured information by using reverse engineering tools, in order to provide effective guidelines for productive software maintenance and re-engineering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2654-2660
• /
• 2010

The purpose of this paper is to organize the issues regarding the necessary components of public design in order to provide an outlook of policy guidelines on urban design based on the concept of publicity and user participation. This paper includes an in-depth analysis of CABE in order to suggest communal notions and the values of public design that would enhance the quality of public design. Thus, it can be used as a reference when catalyzing public design regulations and policies in the future. It analyzes the design review and supportive tools for good decision-making of suggested in the CABE case in order to provide an integrated model of public design to overcome the difficulties presented by current approaches of public design. The unity of values, methods, subjects, issues, and places suggested in this paper is the key notion that emphasizes the importance of the integrated model of public design through the cooperation and communication between gents involved in public design process.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.1
• /
• pp.41-51
• /
• 2022

Purpose: Community-acquired bacterial enteritis (CABE) is a common problem in developed countries. It is important to understand the epidemiologic changes in bacterial pathogens for prevention and treatment. Therefore, we studied the epidemiologic changes in CABE in Korean children. Methods: A total of 197 hospitalized pediatric patients aged <19 years that presented with dysentery symptoms and showed positive polymerase chain reaction results for bacterial species in stool samples, were enrolled in this study for 10 years (June 2010 to June 2020). We classified patients in phase I (06, 2010-06, 2015) and phase II (07, 2015-06, 2020) and analyzed their epidemiologic and clinical characteristics. Results: The most common pathogens were Campylobacter species (42.6%) and Salmonella species were the second most common pathogens (23.9%). The abundance of pathogens decreased in the following order: Clostridium difficile (9.6%), Shigella (5.6%), and Clostridium perfringens (5.6%). Escherichia coli O157:H7 was found to be the rarest pathogen (2.0%). Campylobacter species showed an increase in the infection rate from 32.1% in phase I to 49.6% in phase II (p=0.0011). Shigella species showed a decline in the infection rate in phase I from 14.1% to 0.0% in phase II (p<0.001). C. difficile and C. perfringens showed an increase in infection rate in phase II compared to phase I, but the difference was not statistically significant. Conclusion: The infection rate of Campylobacter species in CABE has been rising more recently, reaching almost 50%. This study may help establish policies for prevention and treatment of CABE in Korean children.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.21-27
• /
• 2014

A study on the solvent extraction for the recovery of Li from lithium-containing waste solution was investigated using $D_2EHPA$ as an extractant. The experimental parameters, such as the pH of the aqueous solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percentage of Li was increased with increasing the equilibrium pH. More than 50% of Li was extracted in eq. pH 6.0 by 20% $D_2EHPA$. From the analysis of McCabe-Thiele diagram, 95% of Li was extracted by four extraction stage at phase ratio(O/A) of 3.0. Stripping of Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 90 ~ 120 g/L of $H_2SO_4$ was effective for the stripping of Li. Finially, Li was concentrated about 11.85 g/L by continuous stripping process, and then lithium carbonate was prepared by precipitation method.

• Resources Recycling
• /
• v.6 no.3
• /
• pp.9-14
• /
• 1997

A study has been made of the rccovery of copper (11) by solvent extraction with Alamine336 (Tri-n-oclylamine) as a extractant from hydrochloric etching solutions. The effect of extractant concentrations, hydrochloric acid, chloride Ion concentrations and phase ratio (organiclaqueaus) on copper extraction were studied. Experimental results showed that the concenl~atiano f extractant and the phase ratio strongly influenced the copper extraction, and the extraction percent of capper Increased at higher hydrochloric acid and chloride ion mncmhation. We proposed that the optimum extrachon stages of copper for continuous extraction process by analysidng thc McCabe-Thielc diagram. Stripping of copper from the loaded organic phases wn be accomplished by pure water (H, O) as a dripping reagent effectively. As the tcmpcrature is increased, thc stripping of copper is enhanced.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.3
• /
• pp.59-70
• /
• 1993

This paper presents the results of experiments which compare the software complexity between programming languages, i.e, FORTRAN IV and FORTRAN 77, PASCAL and C language, respectively. Each experiment is performed to compare the complexity between programs of same problems using Halstead's method based on operator, and McCabe's based on data flow. As the results of 25 test programs experiments, FORTRAN 77 languages shows superiority to FORTRAN IV languages, and C than that of PASCAL languages, in the aspect of the global software complexity.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.11-19
• /
• 2020

Software education is provided for 6th grade students. This study explored the algorithmic composition patterns of elementary school students. After investigating the algorithm for the 6th grade students, the algorithmic pattern of the learner was explored by calculating the cyclomatic complexity of MacCabe based on the structural programming technique. Students often use one or two choice structures to solve problems, which tend to be biased towards the starting and ending points of the problem. It is also passive in the use of selection structures. Algorithm composition depends on visible objects and one's own background. Therefore, in elementary school software education, it is necessary to present the task of thinking about the algorithm structure in the context of the algorithm and the students' experiences in accordance with the algorithm composition pattern.