• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.331-334
• /
• 2001

The voltage resonating inverter has a defect in switching element that works at 5 or 6times higher than input voltage. Especially, it is very difficult to choose the switching device is very high for the 220(V)commercial voltage. In this paper, it is proposed the optimum method to realize the turbo 2000(W) power for induction cooker that is employed the 900(V) IGBT with decreasing operating voltage of the switching component by making the 220(V), 1500(W) inverter through the claim mode voltage resonating inverter.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.65-68
• /
• 2000

본 논문에서는 평면상에 존재하는 물체까지의 거리를 카메라시스템을 이용하여 실제 거리를 계측하는 알고기즘을 제안하였다. 계측 시스템을 교정하기 위해, 우선 3차인 실세계 좌표계와 2차원의 카메라 좌표계의 관계를 해석하고, 카메라의 변수들을 포함하는 카메라 좌표계의 변수들을 구하였다. 한편, 3파원 공간에서 계측면을 평면으로 가정하고 평면의 방정식과 좌표계 변환 방정식으로부터 뉴턴-랩슨법을 이용하여 최소값에 대응하는 근사치를 구함으로써 물체까지의 거리 정보를 추출하였다. 실제의 계측 실험에서, 도로에 표준 물체인 Ca]ibration 시트를 두고 승용차의 백미러 위치에 카메라를 설치하고 영상을 획득하였다. 계측 거리는 4m부터 lOm까지는 1m간격으로 계측하고, 10m부터 30m까지는 10m간격으로 계측하였다. 그 결과 4m에서는 약 1.4mm의 오차가 발생하였고, 30m의 거리에서는 3.5m의 오차를 보였는데 계측 거리가 길어질수록 오차가 지수함수적으로 증가함을 알 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.467-470
• /
• 2010

본 논문에서는 IEEE 802.11 WLAN의 MAC인 DCF의 성능을 개선하는 알고리즘을 제안하고 이를 해석적으로 분석한다. IEEE 802.11 WLAN의 MAC에서는 데이터 전송을 제어하기 위한 방법으로 DCF와 PCF를 사용하며, DCF의 경우 CSMA/CA를 기반으로 한다. DCF는 경쟁 스테이션이 적은 상황에서는 비교적 우수한 성능을 보이나 경쟁 스테이션의 수가 많은 경우 처리율, 지연 관점에서 성능이 저하되는 문제점이 있다. 본 논문에서는 패킷 전송 후 충돌이 발생하면 윈도우 값을 최대 CW로 증가시키고 연속적으로 c번 패킷전송에 성공하면 CW를 감소함으로써 패킷 충돌 확률을 낮추는 알고리즘을 제안하고 이를 수학적으로 분석한다. 제안하는 알고리즘의 효율성을 입증하기 위해 시뮬레이션을 수행하여 그 타당성을 제시하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.799-801
• /
• 2012

Wireless Mesh Network (WMN) can be defined as a communication network consisting of radio nodes organized in a mesh topology, which has been attracting much attention due to its promising technology. This paper addressed the factors on how to design routing protocols for WMN. 2 examples of designing routing metric and routing algorithm are given for case study. With consideration of those factors such as wireless broadcast advantage (WBA)/channel assignment (CA) or intra-flow/inter-flow interference high throughput is achieved.

• Journal of Information Technology Services
• /
• v.21 no.6
• /
• pp.127-145
• /
• 2022

Luna Coin, which ranked eighth in the global market capitalization and established itself as a super-large stablecoin, plunged overnight, shocking the market. Therefore, this study proposed the direction of Korea's stablecoin regulation, focusing on the Terra-Luna situation, starting with the question of whether the stable coin's value, 'stability', can be trusted. The whole story of the Terra-Luna incident was examined in depth and the problems were pointed out, and the direction of domestic stable coin regulation was described based on overseas cases. In the absence of any legal guidelines for stablecoin at the moment, we hope that this study will provide a minimum stabilizer in the virtual asset market and help protect investors.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.133-145
• /
• 2001

The receptor modeling is one of the statistical methods to achieve reasonable air pollution strategies. The pur-pose of this study was to survey the concentration variability oi inorganic elements and ionic species in the PM-10 particles, to qualitatively characterize emission sources by an advanced algorithm called positive matrix factoriza-tion(PMF) as a receptor model that can strictly provide results in every loading matrix. A total of 254 samples was collected by a PM-10 high volume air sampler from Mar. 1997 to Feb. 1998 in Kyung Hee University at Suwon Campus. Fourteen chemical species(Zn, Cu, Fe, Pb, Al, Mn, $Na^{+}$, NH$_4$+, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, $SO_4^{2-}$, $NO_{3}^{-}$, and $Cl^{-}$) were determined by AAS and IC methods. The study results showed that the average monthly concentration of PM-10 particles were 86.3$\mu\textrm{g}$/$\textrm{m}^3$ in March (maximum) and 28.5$\mu\textrm{g}$/$\textrm{m}^3$ in August(minimum), respectively. The concentrations of Na+, NH$_4$+, $K^{+}$ and $Cl^{-}$ in winter, $Mg^{2+}$, $Ca^{2+}$ and $NO_{3}^{-}$, in spring, and $SO_4^{2-}$ in summer showed the largest peak concentration for the respective season. Through and app-lication of a PMF program of Pm-10 concentration data of Suwon, 9 sources were qualitatively identified , such as incineration source, oil burning source, soil related source, open burning source automobile source, coal burning sources, secondary sulfate related source, and secondary nitrate related source.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.63-70
• /
• 2010

In IEEE 802.11e system providing differentiated services, there exist some problems as follows; collision probability increase due to the increase in the number of nodes by employing CSMA/CA transmission mode, transmission speed declining tendency towards the worst of it, which is caused by different transmission mode and decrease of TCP transmission rate as the result of the link occupancy by UDP when TCP shares the link with UDP by the TCP’s flow control characteristic. In this thesis, the initial minimum and maximum CW are set differently according to the number of connected nodes in the network to avoid collisions and TXOP is adjusted according to the channel state, in which ACs with low priority but better channel state will get gradually more chances to transmit leading to optimal channel capacity. Also, by allowing higher priority for ACK frames which control the TCP transmission, the flow control becomes better because that reduces the channel occupancy by UDP flow, and by this, fair transmission is obtained from the result of the more fair transmission and active resource allocation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.950-975
• /
• 2016

Device-to-Device (D2D) communication underlaying cellular networks is a promising add-on component for future radio communication systems. It provides more access opportunities for local device pairs and enhances system throughput (ST), especially when mobile relays (MR) are further enabled to facilitate D2D links when the channel condition of their desired links is unfavorable. However, mutual interference is inevitable due to spectral reuse, and moreover, selecting a suitable transmission mode to benefit the correlated resource allocation (RA) is another difficult problem. We aim to optimize ST of the hybrid system via joint consideration of mode selection (MS) and RA, which includes admission control (AC), power control (PC), channel assignment (CA) and relay selection (RS). However, the original problem is generally NP-hard; therefore, we decompose it into two parts where a hierarchical structure exists: (i) PC is mode-dependent, but its optimality can be perfectly addressed for any given mode with additional AC design to achieve individual quality-of-service requirements. (ii) Based on that optimality, the joint design of MS, CA and RS can be viewed from the graph perspective and transferred into the maximum weighted independent set problem, which is then approximated by our greedy algorithm in polynomial-time. Thanks to the numerical results, we elucidate the efficacy of our mechanism and observe a resulting gain in MR-aided D2D communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.453-461
• /
• 2019

In this paper, we focus on the study of multi-node rendezvous on one common channel among multiple channels before transmitting in CRAHNs (Cognitive Radio Ad-hoc Networks) for the efficient use of inefficient frequency resources. Most existing researches have dealt with the channel rendezvous between two nodes. But, it can be time-consuming to apply them to three or more nodes. In addition, it cab be impossible to communicate with each other. Therefore, in this paper, we propose a Multi-Node Sequence (MNSEQ), which allows three or more nodes to rendezvous on a single common channel in a short period of time. And, CSMA/CA was applied for data exchange after rendezvous. By performance evaluation through very extensive simulations, we have demonstrated that the proposed MNSEQ outperforms the existing scheme in terms of communication completion time and transmission efficiency.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.341-346
• /
• 1999

In general cases, compared with glass electrode, FET type electrolyte sensors have many advantages. But the drift, memory effect and the poor reproducibility of the FET type electrolyte sensor cause the decrease of the reliability in the measurement system. To improve the reliability, an ion-measuring system using FET type electrolyte sensor array with 8 sensors has been developed. Developed system employed the electronic switchs to connect a signal detecting circuit with 8 sensor array and the system can measure ion concentration of 4 different type electrolyte($H^+$, $Na^+$, $K^+$, $Ca^{2+}$). The signal processing algorithm with insertion sorting method was adopted to enhance the reliability. We measured 3 different ion($H^+$, $Na^+$, $K^+$) to evaluate the performance of developed system. The results show that the designed signal processing algorithm can reduce the error range in comparison with a simple arithmetic mean and the developed system has a good reliability over the previous single channel sensor system.