• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.329-336
• /
• 2000

Backgrounds : The purpose of this study was to identify drugs that can enhance radioresponse of murine fepatocarcinorna. Methods : CSH/HeJ mice bearing 8 mm tumors of murine fepatocarcinorna, HCa-1, were treated with 25 Gy radiation and one of the following drugs: 5-Fu, 150 mghg; adriamycin, 8 mg/kg; cisplatin, 6 mg/kg; paclitaxel, 40 mg/kg; and gemcitabine, 50 mg/kg. Tumor response to the treatment was determined by tumor growth delay assay and by enhancement factor. Apoptotic level was assessed in tissue sections. Expression of regulating molecules was analyzed by western blotting for p53, Bcl-2, Bax, Bcl-XL, Bcl-XS, and p21$^{WAF1/CIP1}$. Results :Among the drugs tested, only gemcitabine enhanced the antitumor effect of radiation, with enhancement factor of 1.6. Induction of apoptosis by a combination of gemcitabine and radiation was shown as only additive level. In analysis of radiation-induced expression of regulating molecules, the most significant change by combining gemcitabine was activation of p21$^{WAF1/CIP1}$ Conclusion :Gemcitabine is the first drug showing an enhancement of radioresponse in murine hepatocarcinoma, when combined with radiation. The key element of enhancement is thought to be p21$^{WAF1/CIP1}$.

• Korean Journal of Microbiology
• /
• v.46 no.3
• /
• pp.270-277
• /
• 2010

In order to manufacture Bacillus cereus-free fermented soybean products, an antimicrobial agentproducing isolate against B. cereus was obtained from 150 traditionally fermented soybean products. The morphological and biochemical tests and the phylogenetic relationship among 16S rRNA gene sequences indicated that the isolate named as the strain SCK 121057 was most closely related to Bacillus licheniformis. The B. licheniformis isolate began to produce the antimicrobial agent after 48 h of incubation. The agent was nonproteinaceous and insensitive to heat, long term storage and protease K. Electron microscopic observation indicated that the agent attacked the membrane of B. cereus, leaving the ghost cell. The isolate inhibited growth of B. subtilis, Lactobacillus brevis and various types of pathogenic strains including Escherichia coli, E. faecalis, Micrococcus luteus, Staphylococcus aureus, Aspergillus flavus, A. ochraceus, and A. parasiticus as well as B. cereus. After coinoculation of B. licheniformis SCK 121057 and B. cereus in the ratio (as the basis of CFU/g sample) of 10 to 1 on the surface of cooked soybeans, cell numbers of B. cereus had been dramatically reduced after 31 days of incubation compared to those of single inoculation of B. cereus.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.554-566
• /
• 2018

The rice husk contains nutrients which can be easily utilized by microorganisms, and also has a water retaining ability, which played a crucial part in enabling it to become a biofilter media. In this study, we evaluated the applicability of rice husk pellet bio-scrubber as a microbiological carrier. The pelletization experiment of rice husk as a biological media was performed using PVA and EVA binder. Also, the feasibility tests of rice husk as a biological media for odor removal were carried out in order to know whether rice-husk contains useful components as a media for microbiological growth or not. Lastly, a combined test for odor gas absorption and biological oxidation was conducted using a lab scale bio-filter set-up packed with rice-husk pellets as wet-scrubber. The major components of the rice husk were carbon, hydrogen, nitrogen, and oxygen, while carbon acted as the main ingredient which comprised up to 23.00%. The C : N : P ratio was calculated as 45 : 1 : 2. Oxygen uptake rate, yield and decay rate of the rice husk eluent was calculated to be $0.0049mgO_2/L/sec$, 0.24 mgSS/mgCOD and 0.004 respectively. The most stable form of rice husk pellets was produced when the weight of the rice husk, EVAc, PVAc, and distilled water was 10 : 2 : 0.2 : 10. The prepared rice husk pellets had an apparent density of 368 g/L and a porosity of 59.00% upon filling. Dry rice husks showed high adsorption capacity for ammonia gas but low adsorption capacity for hydrogen sulfide. The bio-filter odor removal column filled with rice husk pellets showed more than 99.50% removal efficiency for NH3 and H2S gas. Through the analysis of circulation water, the prime removal mechanism is assumed to be the dissolution by water, microbial nitrification, and sulfation. Finally, it was confirmed that the microorganisms could survive well on the rice husk pellets, which provided them a stable supply of nutrients for their activity in this long-term experiment. This adequate supply of nutrients from the rice husk enabled high removal efficiency by the microorganisms.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.211-217
• /
• 2013

Corynebacterium glutamicum is one of the well-studied industrial strain that is used for the production of nucleotides and amino acids. Recently, it has also been studied as a possible producer of organic acids such as succinic acid, based on its ability to produce organic acids under an oxygen deprivation condition. In this study, we conducted the optimization of medium components for improved succinate production from C. glutamicum under an oxygen deprivation condition by Plackett-Burman design and applied a response surface methodology. A Plackett-Burman design for ten factors such as glucose, ammonium sulfate, magnesium sulfate, potassium phosphate ($K_2HPO_4$ and $KH_2PO_4$), iron sulfate, manganese sulfate, biotin, thiamine, and sodium bicarbonate was applied to evaluate the effects on succinate production. Glucose, ammonium sulfate, magnesium sulfate, and dipotassium phosphate were found to have significant influence on succinate production, and the optimal concentrations of these four factors were sequentially investigated by the response surface methodology using a Box-Behnken design. The optimal medium components obtained for achieving maximum concentration of succinic acid were as follows: glucose 10 g/l, magnesium sulfate 0.5 g/l, dipotassium phosphate ($K_2HPO_4$) 0.75 g/l, potassium dihydrogen phosphate ($KH_2PO_4$) 0.5 g/l, iron sulfate 6 mg/l, manganese sulfate 4.2 mg/l, biotin 0.2 mg/l, thiamine 0.2 mg/l, and sodium bicarbonate 100 mM. The parameters that differed from a normal BT medium were glucose changed from 40 g/l to 10 g/l, dipotassium phosphate ($K_2HPO_4$) 0.5 g/l changed to 0.75 g/l, and ammonium sulfate ($(NH_4)_2SO_4$) 7 g/l changed to 0 g/l. Under these conditions, the final succinic acid concentration was 16.3 mM, which is about 1.46 fold higher than the original medium (11.1 mM) at 24 h. This work showed the improvement of succinate production by a simple change of media components deduced from sequential optimization.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.299-308
• /
• 2020

Composting is among the most effective integrated waste management strategies used to recycle sewage sludge (SS) waste and generate a useful product. An encapsulated lifting system is a relatively new industrial-scale composting technology. The objective of this study was to evaluate the effectiveness of composting dewatered stabilized SS mixed with green waste using this new technology. The composting process was monitored by changes in the physico-chemical properties, UV-visible spectra, and fourier transform infrared (FTIR) spectra. The composting temperature was steady in the thermophilic range for 24 and 12 d in the intensive and maturation phases, respectively, which fulfilled the disinfection requirement. Moreover, the temperature increased rapidly to 76.8℃ within three days, and the thermophilic temperatures peaked twice and lasted longer than in traditional composting, which accelerated SS degradation and decreased the composting period necessary to obtain mature compost. FTIR spectroscopic analysis showed a diminished in methyl group derived from methylene C-H aliphatic groups because of organic matter degradation by microorganisms and an increased number of aromatic chains. The new technology may be a viable and sustainable alternative for SS management that converts waste into compost that is useful as a soil amendment.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.150.2-151
• /
• 2003

한국산 장뇌산삼의 열매, 잎, 줄기 및 뿌리를 -7$0^{\circ}C$ 동결건조 분말화시킨 시료에 대한 추출용매와 농도에 따른 유용성분의 함량을 비교, 분석하였다. 추출액의 당도는 잎과 줄기의 80% 에탄올추출액이 각각 22.58%와 22.53%로 가장 높았고, pH는 4.43-7.41 수준이었고, 갈변도는 흡광도가 잎과 뿌리 80% 에탄올추출액이 1.803과 1.085로 가장 높았다. 색도의 경우 L값는 줄기 100% 증류수추출액이 24.56, 열매 80% 메탄올추출액이 24.35로 가장 높았고, 뿌리와 잎 80% 에탄올추출액이 각각 17.47과 19.59로 가장 낮은 값을 나타내었다. a값은 잎100% 증류수추출액이 0.41로 가장 높았고, 줄기 80%메탄올추출 액이 -0.49로 가장 낮은 값을 보였다. b값은 줄기 80% 메탄올추출액이 3.69로 가장 높았고, 열매 100% 증류수추출액 이 0.45로 가장 낮은 값이었다. 주요 유리당은 sucrose, glucose 및 fructose 이었고, 유리당 총함량은 열매와 줄기 100% 증류수추출액이 각각 6733 mg/100g과 6142 mg/100g으로 가장 많은 량을 함유하였고, sucrose는 뿌리 80% 메탄올추출액 이 3673 mg/100g으로, glucose 및 fructose는 줄기 80% 에탄올추출액과 잎 80% 메탄올추출액에 각각 4283 mg/100g과 1897 mg/100g으로 높은 함유량을 나타내었다. 또한 잎과 줄기에는 xylose가 304-524 mg/100g 수준으로 함유되어 있었고, 뿌리에는 maltose가 소량 함유하고 있었다. 주요 유기산으로는 citric acid, tartaric acid 및 malic acid가 확인되었고, citric acid는 뿌리 80% 메탄올추출액이 1849 mg/100g으로 가장 높은 함량이었고, tartaric acid는 잎 80% 메탄올추출액이 3263 mg/100g으로 가장 높은 함량이었고, malic acid는 뿌리 80% 메탄올추출액이 1856 mg/100g으로 가장 높은 함량이었으며, 뿌리 80% 메탄올추출액에는 succinic acid, malonic acid 및 oxalic acid 등이 확인되었다. 유리아미노산은 L-Arginine, ${\gamma}$-Amino-n-butyric acid, Ethanolamine, L-Proline, $\beta$-Alanine 및 L-sarcosine 등 총 35종이 확인되었고, L-Arginine은 251-7379 mg/100g 수준으로 특히, 뿌리 80% 메탄올추출액에는 1319 mg/100g으로 총함유량의 79.13%로 매우 높은 함유량을 나타내었다. P, K, Na, Ca 및 Mg 등이 주된 무기질로 확인되었고, 그 중 P는 줄기 100% 증류수추출액에 15563 mg/100g으로 가장 높았고, K은 잎 80% 메탄을 추출액에 4952 mg/100g, Ca과 Na은 잎과 열매 100% 증류수추출액에 각각 3052 mg/100g과 1798 mg/100g, Mg은 잎 100% 증류수추출액에 950 mg/100g으로 매우 높은 함유량을 보였고, 또한 미량원소로는 Zn, Cu, Cr, Mn, Co, Mo, Fe 등이 함유되어 있었다.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.4
• /
• pp.329-337
• /
• 2011

The Acer wilsonii complex including A. wilsonii, A. tutcheri, and A. confertifoilum is distributed in southern China. Morphological variation was examined to delimit the species and to determine whether recognition at the specific level was warranted. Univariate and bivariate statistical methods, based on data taken from herbarium specimens, were used to examine morphological variation between and within species. This study showed that A. tutcheri differed from A. wilsonii by its rather short inflorescence, small leaf blades, and three leaf lobes with distinctive serrate leaf lobes. In contrast, there was virtually no separation of taxa with respect to the paniculate-corymbose or short paniculate inflorescence between A. confertifolium and A. tutcheri, suggesting that A. confertifolium morphologically resembled A. tutcheri and is a rather smaller form of it. Circumscription of Acer wilsonii has been quite troublesome, because the important holotype and isotype specimens contained different species under the same number and were misleading with respect to the correct application of the name. Furthermore, lobation is very weak within ser. Sinensia, but diversified inflorescences usually occur in China. A three lobed leaves species, A. wilsonii, represents the reduction in lobation without any modification of panicle inflorescences and seems to be closely related to A. sinense. However, A. tutcheri, which shows a reduction in panicle inflorescence with four petals and sepals, may not be closely related to A. sinense. Three lobed taxa may not correctly reflect the true relationship within ser. Sinensia. The designated lectotype of A. wilsonii, line drawings of representative leaves of related species, a key, and distribution maps of these taxa are presented.

• Korean journal of applied entomology
• /
• v.53 no.3
• /
• pp.231-237
• /
• 2014

This study was carried out to investigate the pest species and their damage on Asparagus officinalis. Field surveys were conducted in asparagus greenhouse in Jeju, for four years from 2007 to 2010. Total of 16 pest species belonging to 5 orders were found as follows: Thrips tabaci, Thrips hawaiiensis, Adoxophyes honmai, Spodoptera litura, Spodoptera exigua, Helicoverpa armigera, Mamestra brassicae, Ascotis selenaria, Ectropis excellens, Geisha distinctissima, Aphis gossypii, Myzus persicae, Anomala albopilosa, Crioceris quatuordecimpunctata, Acusta despecta sieboldiana and Deroceras reticulatum. Among them, T. tabaci frequently occurred and damaged asparagus plants during the whole growing seasons. C. quatuordecimpunctata and snails caused severe damages on asparagus shoots in spring harvest season. In mid-late seasons, aphids and lepidopteran species occurred and attacked asparagus plants. Of the lepidopteran pests, S. litura, S exigua and H. armigera belonging to Noctuidae occurred moderately and fed on asparagus plants. And the pest control strategy in asparagus cultivation was discussed based on the present results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.164-167
• /
• 2010

Bulk GaN single crystal with 1.5 mm thickness was successfully grown by hydride vapor phase epitaxy (HVPE) technique. Free-standing GaN substrates of $10{\times}10,\;15{\times}15$ mm size were fabricate after lift-off of sapphire substrate and their optical properties were characterized properties for device applications. X-ray diffraction patterns showed (002) and (004) peak, and the FWHM of the X-ray rocking curve (XRC) measurement in (002) was 98 arcsec. A sharp photoluminescence spectrum at 363 nm was observed and defect spectrum at visible range was not detected. The hexagonal-shaped etch-pits are formed on the GaN surface in $200^{\circ}C\;H_3PO_4$ at 5 minutes. The defect density calculated from observed etch-pits on surface was around $5{\times}10^6/cm^2$. This indicates that the fabricated GaN substrates can be used for applications in the field of optodevice, and high power electronics.