• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.563-572
• /
• 2006

In order to propose optimum in-situ treatment for reducing phosphorous release from sediment of stationary lakes, a series of column tests were performed. The sediment used in experiment was very fine clay with a mean grain site $7.7{\phi}$ and high $C_{org}$ contents(2.4%). Phosphorous releases were evaluated in two ways : in lake water(with microbial effect) and in distilled water(without microbial effect). As in-situ capping material, sand and loess were used while Fe-Gypsum and $SiO_2$-Gypsum were used for in-situ chemical treatment. In case of lake water considering the effect of microorganism, phosphorous concentration rapidly decreased in the early stage of experiment but it was gradually increased after 10 days. Flux of phosphorous release for control was $3.0mg/m^2{\cdot}d$. Whereas, those for sand layer capping(5 cm) and loess layer capping(5 cm) were $2.5mg/m^2{\cdot}d\;and\;1.8mg/m^2{\cdot}d$, respectively because the latter two were not consolidated sufficiently. For Fe-gypsum and $SiO_2$-gypsum the fluxes were $1.4mg/m^2{\cdot}d$ which meant that reduction efficiency of phosphorous release was more than 40% higher than that of control. The case capping with complex layer was $1.0mg/m^2{\cdot}d$, which showed high reduction efficiency over 60%. The addition of gypsum($CaSO_4{\cdot}2H_2O$) into the sediment reduced release of Phosphorus from the sediments. Gypsum acted as a slow-releasing source of sulphate in sediment, which enhanced the activity of SRB(sulfate reducing bacteria) and improved the overall mineralization rate of organic matter.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.465-471
• /
• 2008

Physicochemical characteristics of black garlic were analyzed. Colorimetry measurement showed that the black garlic, compared with fresh and steamed garlics, was the highest in a value and the lowest in L and b values. Crude lipid, crude protein, and total sugars were the highest in black garlic, which was followed by steamed and fresh garlic. On the other hand, moisture content was the lowest in the black garlic and the highest in the fresh garlic. The pH of garlics was ca. 6.8, 6.5, and 4.4 in fresh, steamed, and black garlic, respectively, which indicated that garlics tended to be acidified with the thermal processing. Total pyruvate and total thiosulfinates were the lowest in steamed garlic ($77{\mu}mol$/g and 0.07 OD/g for each) and the highest in black garlic ($278{\mu}mol$/g and 0.77 OD/g). Arabinose and galactose were detected only in black garlic and their contents were 1.6 and 13 mg/100 g, respectively. Free sugars such as glucose, sucrose and fructose were the highest in the order of fresh, steamed, and black garlic. Potassium was a predominant mineral in all garlics, constituting 76% of total minerals. Glutamic acid, arginine, and aspartic acid were the major composition amino acids in all garlics, regardless of processing conditions. 15 kinds of free amino acids were detected in fresh and steamed garlic, while five more free amino acids, O-phosphoethanolamine, and urea were additionally detected in black garlic.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.159-164
• /
• 1973

This study was carried out in the central part of Korea for three years from 1970 to 1972. Its aim was to investigate the variations of growth and yield of rice varieties of different cultivating methods (transplanting culture, direct sowing culture on irrigated paddy field, and direct sowing culture on non-irrigated paddy field. The results could be summarized as follows; 1. The number of days from sowing to heading by direct sowing culture on irrigated paddy field was remarkably shorter than transplanting culture. Direct sowing culture on non-irrigated paddy field was longer than transplanting culture. 2. The number of panicles showed direct sowing culture on irrigated paddy field was first, direct sowing culture on non-irrigated paddy field was second, and third transplanting culture. But the number of spikelets per panicle was first on the transplanting culture, second on the direct sowing culture on non-irrigated paddy field and third on the direct sowing culture on irrigated paddy field. 3. The weight of the brown rice showed that direct sowing culture on irrigated paddy field produced the highest yield among the cultivating method in all varieties. The transplanting culture increased more than the direct sowing culture on non-irrigated paddy field. The highly productive varieties were Sadominory, Akibale, Suwon 213-1 when the direct sowing culture on irrigated paddy field was used. 4. The correlation between the brown rice yield and the yield components were as follows; in each cultivating method, it showed highly significant positive correlation between the brown rice yield and the 1, 000 grain weight of hulled rice, and between the brown rice yield and the number of the spiklets per panicle in the transplanting culture, in the direct sowing culture On irrigated paddy field between the brown rice yield and the number of spikelets per panicle and between the brown rice yield and the number of panicles, in direct sowing culture on non-irrigated paddy field between the brown rice yield and number of panicles. 5. It showed highly significant negative correlation between the brown rice yield and the number of days from sowing to heading in the direct sowing culture on irrigated and non-irrigated paddy field, but it was showed very low negative correlation in the transplant culture.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.305-314
• /
• 2023

Ultraviolet B (UVB) irradiation causes skin diseases by inducing cellular oxidative stress, photoaging, and inflammation. This study aimed to investigate the protective effects of morin against UVB-induced oxidative stress in normal human dermal fibroblasts (NHDFs). Morin has been reported to be a potential therapeutic candidate for oxidative stress-mediated diseases, neurodegenerative diseases, and inflammation. Since morin has been identified as a potential antioxidant, we speculated that morin could alleviate UVB-induced apoptosis in NHDFs. Cell viability and intracellular reactive oxygen species (ROS) levels were measured using the MTT assay, H2DCFDA, and the DHE staining method, respectively. Lipid peroxidation and protein carbonyl formation were tested using ELISA kits. DNA fragmentation and comet assay were used to assess DNA damage. Apoptotic bodies were analyzed using Hoechst 33342 staining and TUNEL assay. The expression of apoptosis-related proteins was examined using Western blot analysis. Morin showed a cyto-protective effect by scavenging UVB-induced ROS, increasing the expression of antioxidant-related proteins and inhibiting UVB-induced oxidative alterations such as lipid peroxidation, protein carbonylation, and DNA damage. Morin protects against UVB-induced cell apoptosis by inhibiting Bcl-2-associated X protein, caspase-9, and caspase-3 expression, while increasing the expression of the anti-apoptotic protein Bcl-2. These effects of morin were conferred through decreased phosphorylation of p38 and c-Jun N-terminal kinase 1/2. The results demonstrated that morin may be developed as a preventive/therapeutic drug to be used to prevent UVB-induced skin damage.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.189-196
• /
• 2005

This study was carried out to determine the acceptability of liquid manure bin among livestock farmers and agricultural farmers, and quantify its malodorous compounds. The results were as follows; 1. The size of the manure bins owned by $93\%$ of 60 farmers surveyed was 200 M/T and were all in normal operation. Around $57\%$ of the normally operated bins were processed under aerobic condition. 2. Filly percent of the respondents utilized their liquid manure bin twice a year while $64\%$ used commercial microbial products to enhance maturity of their liquid manure and abatement of malodorous emissions. On the other hand, $43\%$ mentioned problems on the labor requirement, mechanical maintenance and lending cost of liquid manure processing and utilization, and the price of the commercial microbial products. 3. Malodorants emitted from livestock liquid manure bins and their boundary bin depended upon the livestock liquid manure processing condition. Within bin under the aerobic processing condition, Iso-valeric and propionic acid were ranged 0.012 to 0.07ppm and 0.17 to 2.85ppm, respectively. Within bin under the anoxic processing condition, n-butyric, n-valeric acid, and acetaldehyde were ranged 1.5 to 2.3ppm, 1.3 to 1.8ppm, and 0.8 to 2.1ppm, respectively. Malodorants emitted from the boundary of livestock liquid manure bins under the anoxic processing condition were detected the range of 0.4 to 0.9 ppm, more than the concentration of law regulation, as an acetaldehyde, but under the aerobic processing condition, they did not any detection.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.177-182
• /
• 2006

This study was conducted to investigate the effects of melengesterol acetate (MGA) and $PGF_{2{\alpha}}$ administrations on serum progesterone level, synchrony of estrus and conception rates in Han-woo. Firstly, ten heifers and one freematin were fed 0.5 mg MGA/day for 14 days in a grain carrier, and after 19 days of MGA feeding, a single injection of 25 mg $PGF_{2{\alpha}}$ were treated. Blood samples were collected to evaluate serum progesterone concentrations from the start of feeding of MGA until the end of feeding and subsequent estrous detection and artificial insemination (AI) at 3 days intervals, and on days of $PGF_{2{\alpha}}$ injection, estrous detection, AI, and 15th and 60th days after AI. The level of progesterone in the blood began to increase from 7 days after MGA feeding, and 9 days after feeding it became 5.4 ng/ml and maintained that level thereafter. On the 33th day when the $PGF_{2{\alpha}}$ was injected, it reached the peak level of 7.6 ng/ml. However, 2-3 days after $PGF_{2{\alpha}}$ injection, it dropped to 1.4 ng/ml drastically (p<0.05). Secondly, one hundred and ninety four Hanwoo heifers or cows were divided into two groups to compare estrous induction and conception rates: the one treated with MGA and $PGF_{2{\alpha}}$, (n=104) and the other with $PGF_{2{\alpha}}$ treatment (two injections at 11 days interval, n=90). The heifers or cows treated with MGA and $PGF_{2{\alpha}}$ were identical to those used as above. The percentages of heifers or cows showed estrus were higher in the $MGA+PGF_{2{\alpha}}$ treatment (91.3%) than in the $PGF_{2{\alpha}}$ treatment (72.2%, p<0.05). Conception rates were also higher in the $MGA+PGF_{2{\alpha}}$ treatment (94.2%) than in the $PGF_{2{\alpha}}$ treatment (88.9%, p<0.05). The results of this experiment indicate that estrus synchronization using $MGA+PGF_{2{\alpha}}$ is more effective than that using $PGF_{2{\alpha}}$ (two injections) in Hanwoo.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.91-98
• /
• 2016

This aim of the present study was to evaluate the effects of phosphate on the quality properties of the surimi-like materials. Surimi-like materials as a control was prepared with beef heart by three times of washing treatment. Three types of surimi-like materials were manufactured by different conditions(T1: 2% salt, T2: 1.95% salt+0.05% phosphate, T3: 1.90% salt+0.10% phosphate). The moisture content was significantly lower in T1 than the control, and T3 sample had the highest crude protein content(P<0.05). The cooking loss was significantly lower in T2 than the control, and T2 sample had the highest water-holding capacity(P<0.05). The lightness and whiteness values were significantly lower in the treatment samples compared to the control sample; whereas redness values was higher than the control(P<0.05). Beef heart surimi-like materials added with salt and phosphate had higher in texture properties in the control, and T3 sample had the highest hardness, cohesiveness, gumminess and chewiness values(P<0.05). Therefore, the addition of phosphate could increase the protein content and gel properties as well as water-holding capacity of surimi-like materials from beef heart.