• Journal of Ginseng Research
• /
• v.24 no.3
• /
• pp.107-112
• /
• 2000

One of the physiologically important ginseng diseases is red-colored phenomena (RCP) that is caused by accumulation of red-colored substances on the epidermis of ginseng roots. Although RCP severely deteriorates the quality of ginseng products, there has been little information on what red-colored substance is and how RCP occurs. Therefore, the heavy losses of cultivators and ginseng industry are suffering by RCP, For this reason, we have investigated with the morphochernical characteristics of RCP to find out main cause of it. The red-colored substances (RS) on the epidermis of red-colored ginseng (RCG) were examined using inverted light microscope, confocal laser scanning microscope (CLSM)and furier transform infrared (FT/IR) spectrometer. Red brown substances were accumulated in the cell wall of the epidermis from early stage to late stage of RCC. Especially, cell wall of the late stage of RCG was covered with the sub-stances with 80~ 130 fm thick. Therefore, the cell wall of RCG cannot protect the ginseng root cells from the mechanical damages, bacteria and fungi. To analyse red substances of roots, RS were isolated from epidermis of RCG and extracted using various solvents. RS is strongly insoluble but it was bleached by oxidizing agents including 12% (v/v) NaOCl. Therefore, RS was Presumed to make up of high chelation power. The proriles of FT/IR spectra or both healthy ginseng (HEG) and RCG showed a significant difference at two wavelength,2857 cm$\^$-1/(C-H) and 1032 cm$\^$-1/(S=O), respectively. Furthermore, absorption peak of 2857cm$\^$-l/ appears on the only epidermis of RCG. The other peak is shown lower absorption rate on the epidermis of RCG than that of healthy ginseng. Also, FT/IR spectra of the mixture of carboxym-ethylcellulose (CMC) and iron (Fe$\^$3+/) were very similar to RCG spectrum profiles. One of a interesting fact is that the contents of phenolic compounds at the epidermis of healthy ginseng were highest. The results of these experiments sup-port the RCP was closely related with the chemical interaction between inorganic elements (Fe) of rhizosphere and organic matters (cellulose, cellobiose, cell sap, etc.) of ginseng roots.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.133-138
• /
• 2008

Fire can affect microbial community structure of soil through altered environmental conditions, nutrient availability, and biotic source for microbial re-colonization. We examined the influence of fire on chemical properties and soil enzyme activities of soil for 10 months. We also characterized the soil microbial community structure through ester-linked fatty acid analysis(EL-FAME). For this study, we established five burned plots(1*1 m) and 5 unburned plots outside the margin of fire. Soil was sampled three soil cores in a each plots and composited for analysis at 1, 3, 5, 8, and 10 month after fire. The fire caused an increase in soil pH, exchangeable Ca, and Mg, organic matter, available $P_2O_5$ compared to unburned sites. The content of $NH_4-N$ in burned site was significantly higher than that of unburned site and this effect continued for 8 months after fire. There was no difference of $NO_3-N$ content in soil between burned and unburned site. Fire caused no change in acid phosphatase and arylsulfatase activities but $\beta$-glucosidase and alkaline phosphatase activities in burned site were increased compared to unburned site. Microbial biomass as estimated by total concentration of EL-FAMEs in burned sites was significantly higher than that of unburned sites at one month after fire. Burned site decreased the EL-FAMEs indicative of gram-positive bacteria and tended to increase the fatty acid associated with gram-negative bacteria at one and three months after fire. The sum of EL-FAME compound $18:2{\omega}6,9c$ and $18:1{\omega}9c$ as served fungal biomarkers was decreased in burned site compared to unburned site.

• Journal of Adhesion and Interface
• /
• v.10 no.2
• /
• pp.77-83
• /
• 2009

PDMS was selected for a coating material of implantable biosensors and the cytotoxicity of extracts released from a polymer was evaluated using ISO 10993-5, Biological evaluation of medical devices-Part 5: Tests for in vitro cytotoxicity. Organo-tin was used as a positive control and a medium without serum was used as a negative control. Materials extract were prepared by incubating specimens in RPMI medium without serum ($125{\mu}L/cm^2$) for 24 h, 1 week and 6 weeks at $38^{\circ}C$. The evaluation of cytotoxicity was performed by two different methods : 1) seeding cells with extracts at the beginning 2) incubating extracts with cell sheets already formed on the plate. Both cell morphology and MTT numerical data were shown for the confirmation of cytotoxicity and cell spreading on the surface of PDMS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.42.2-42.2
• /
• 2010

Transparent conducting oxides (TCOs) are of significant importance for their applications in various devices, such as light-emitting diodes, thin-film solar cells, organic light-emitting diodes, liquid crystal displays, and so on. In order for TCOs to contribute to the performance improvement of these devices, TCOs should have high transmittance and good electrical properties simultaneously. Sn-doped $In_2O_3$ (ITO) is the most commonly used TCO. However, indium is toxic and scarce in nature. Thus, ZnO has attracted a lot of attention because of the possibility for replacing ITO. In particular, group III impurity-doped ZnO showed the optoelectronic properties comparable to those of ITO electrodes. Al-doped ZnO exhibited the best performance among various doped ZnO films because of the high substitutional doping efficiency. However, in order for the Al-doped ZnO to replace ITO in electronic devices, their electrical and optical properties should further significantly be improved. In this connection, different ways such as a variation of deposition conditions, different deposition techniques, and post-deposition annealing processes have been investigated so far. Among the deposition methods, RF magnetron sputtering has been extensively used because of the easiness in controlling deposition parameters and its fast deposition rate. In addition, when combined with post-deposition annealing in a reducing ambient, the optoelectronic properties of Al-doped ZnO films were found to be further improved. In this presentation, we deposited Al-doped ZnO (ZnO:$Al_2O_3$ = 98:2 wt%) thin films on the glass and sapphire substrates using RF magnetron sputtering as a function of substrate temperature. In addition, the ZnO samples were annealed in different conditions, e.g., rapid thermal annealing (RTA) at $900^{\circ}C$ in $N_2$ ambient for 1 min, tube-furnace annealing at $500^{\circ}C$ in $N_2:H_2$=9:1 gas flow for 1 hour, or RTA combined with tube-furnace annealing. It is found that the mobilities and carrier concentrations of the samples are dependent on growth temperature followed by one of three subsequent post-deposition annealing conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.387-393
• /
• 2017

The dynamic interactions between benzoic acid derivative ($pH{\approx}7.0$)(guest) and ${\beta}$-cyclodextrin (${\beta}$-CD)(host) were investigated in an aqueous solutions in terms of ultrasonic absorption in the frequency range 0.2 MHz ~ 50 MHz with emphasis on the low-frequency range below 1 MHz at $25^{\circ}C$. We show that the interaction of ${\beta}$-CD and benzoic acid derivative complies with a typical spectrum of a single relaxation process around a few MHz. The ultrasonic relaxation observed in these solutions was due to a perturbation of a chemical equilibrium related to a reaction of an inclusion complex formed by the host and guest. The rate constant ($k_b=7.48{\times}10^6M^{-1}s^{-1}$) and equilibrium constant ($K=68.6M^{-1}$) were determined from the concentration dependences of benzoic acid on the relaxation frequency. The standard volume change (${\Delta}V=10.6{\times}10^{-6}m^3mol^{-1}$) of the reaction was also computed from the maximum absorption per wavelength. It was found that the hydrophobicity of guest molecules played an important role in the formation of the inclusion complex.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.45-50
• /
• 2015

The goal of this research is the create novel magnets with no rare-earth contents, with larger energy product by comparison with currently used ferrites. For this purpose we developed nano-sized hard-type/soft-type composite ferrite in which high remanent magnetization (Mr) and high coercivity (Hc). Nano-sized Ba-ferrite, Ni-Zn ferrite and $BaFe_{12}O_{19}/Ni_{0.5}Zn_{0.5}Fe_2O_4$ composite ferrites were prepared by sol-gel combustion method by use of glicine-nitrate and citric acid. Nanocomposite ferrites were calcined at temperature range $700-900^{\circ}C$ for 1h. According to the X-ray diffraction patterns and FT-IR spectra, single phase of NiZn-ferrite and Ba-ferrite were detected and hard/soft nanocomposite ferrite was indicated to the coexistence of the magnetoplumbite-structural $BaFe_{12}O_{19}$ and spinel-structural $Ni_{0.5}Zn_{0.5}Fe_2O_4$ that agreed with the standard JCPDS 10-0325 data. The particle size of nanocomposite turn out to be less than 120 nm. The nanocomposite ferrite shows a single-phase magnetization behavior, implying that the hard magnetic phase and soft magnetic phase were well exchange-coupled. The specific saturation magnetization ($M_s$) of the nanocomposite ferrite is located between hard ($BaFe_{12}O_{19}$) and soft ferrite($Ni_{0.5}Zn_{0.5}Fe_2O_4$). The remanence (Mr) of nanocomposite ferrite is much higher than that of the individual $BaFe_{12}O_{19}$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4$ ferrite, and $(BH)_{max}$ is increased slightly.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.368-373
• /
• 2017

Comparative fining trials were conducted in a laboratory to study the effects of fining treatments including polyvinylpolypyrrolidone (PVPP) and bentonite on the color and clearness of apple wine. The wines were subjected to three different fining treatments: PVPP, PVPP+bentonite (applied at the same time), and PVPP+bentonite (24 h later). Based on the results, all treatments induced noticeable decreases in wine color (APHA value) and turbidity. The treatment including PVPP and bentonite at the same time provided the best results in relation to wine color and clearness. PVPP was the most effective in the reduction of phenolic compounds, which means it helped wine obtain a paler color. Organic acids and aromatic profile were not altered by the fining treatments.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.257-262
• /
• 2015

Recently the world wide efforts reduce occurrence of $CO_2$; global warming main reason. The aim of this study is to improve recycling rate of the fly ash (FA) and fused waste slag (FWS) from the power plant and to carbonate under supercritical condition ($40^{\circ}C$, $80kgf/cm^2$ pressure, 60 min) for $CO_2$ fixation. Specimens of mortar with various mixing ratios of FA, FWS (from 100:0 to 20:80 in 5 steps of 20 % reduction each time), distilled water and 3 M NaOH alkali activators were prepared. As a result, the proportion of weight change ratio increases with CaO content, to 12 % after carbonation under the supercritical condition. There is difference of compressive strength between the carbonated and the alkali activator mortar specimens. The stabilization of $CO_2$ fixation through carbonation which could confirm the applicability of the eco-friendly materials without loss of compressive strength.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.287-295
• /
• 2010

In this study, ordinary Portland cement was used and the air void was minimized by using minute quartz as the filler. In addition, steel fibers were used to mitigate the brittle failure problem associated with high strength concrete. This study is in progress to make an Ultra-high strength powdered concrete (UHSPC) which has compressive strength over 300 MPa. To increase the strength of concrete, we have compared and analyzed the compressive strengths of the concretes with different mix proportions and curing conditions by selecting quartz sand, dolomite, bauxite, ferro silicon which have diameters less than 0.6 mm and can increase the bond strength of the transition zone. Ultra-high strength powdered concrete, which is different from conventional concrete, is highly influenced by the materials in the mix. In the study, the highest compressive strength of the powdered concrete was obtained when it is prepared with ferro silicon, followed in order by Bauxite, Dolomite, and Quartz sand. The amount of ferro silicon, when the highest strength was obtained, was 110%, of the weight of the cement. SEM analysis of the UHSPC showed that significant formation of C-S-H and Tobermorite due to high temperature and pressure curing. Production of Ultrahigh strength powdered concrete which has 28-day compressive strength upto 341MPa has been successfully achieved by the following factors; steel fiber reinforcement, fine particled aggregates, and the filling powder to minimize the void space, and the reactive materials.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.205-217
• /
• 2005

Distraction osteogenesis is a technique of lengthening bone including soft tissue by gradual separation of surgically divided bone surfaces. Although the biomechanical, histological, and ultrastructural changes associated with distraction osteogenesis have been widely described, the molecular mechanisms governing the formation of new bone in distracted bone segments remain largely unclear. However, such information has significant clinical implications because it may enable targeted therapeutic manipulations designed to accelerate osseous regeneration. The purpose of this study was to evaluate the expression of TGF-$\beta$1, IGF-I and bFGF in distraction osteogenesis according to different distraction rates in a rabbit's mandible. When twenty-four adult rabbits underwent open osteotomy between the premolar and mental foramen, an external bilateral distraction device was applied. Latency was allowed for five days before distraction. Three different distraction rates were 0.7 mm/day (A, n=8), 1.4 mm/day (B, n=8) and 2.4 mm/day (C, n=8). The distraction device was activated with the same distraction rhythms of twice a day until 4.9 mm (A & B group) and 8.4 mm (C group) length gains was achieved. The animals were sacrificed at postoperative 3, 7, 14 and 28 days. The bony specimens were stained with H&E for histologic examination, and RT-PCR analysis was done for the identification of the expression of TGF-$\beta$1, IGF-I and bFGF. The results obtained from this study were as follows : The 0.7 mm/day and 1.4 mm/day distraction rate groups were shown to improve regenerative bone formation on radiographic and histologic examination. Also, TGF-$\beta$1, IGF-I and bFGF expression increased in the 0.7 mm/day and 1.4 mm/day distraction rate groups. But the 2.4 mm/day distraction rate group specimen was different with adjacent normal bone and hardly expressed of growth factors. These findings suggest that improved new bone formation in the 0.7 mm/day and 1.4 mm/day distraction rates is associated with enhanced expression of TGF-$\beta$1, IGF-I and bFGF by mechanical tension stress. Additionally, the 0.7 mm/day and 1.4 mm/day distraction rate groups were significantly different from the 2.4 mm/day distraction rate group in the expression of growth factors. According to the above results, it seems possible to apply a distraction rate of up to 1.4 mm/day a day in rabbit's mandible. And further studies are needed to evaluate growth factors of TGF-$\beta$1 and IGF-I, which are excellent in expression.