• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.10
• /
• pp.883-890
• /
• 2005

In this study, 2 pure hydrocarbon refrigerants of R1270 (Propylene) and R290 (Propane) and 3 binary mixtures composed of R1270, R29O and R152a were tested in a refrigerating bench tester with a scroll compressor in an attempt to substitute R502 used in most of the low temperature applications. The test bench provided 3\sim3.5$ kW capacity and water and water/glycol mixture were employed as the secondary heat transfer fluids. All tests were conducted under the same external conditions resulting in the average saturation temperatures of -28 and $45^{\circ}C$ in the evaporator and condenser, respectively. Test results showed that all refrigerants tested had $9.6\sim18.7\%$ higher capacity and $17.1\sim27.3\%$ higher COP than R502. The compressor discharge temperature of R1270 was similar to that of R502 while those of all other refrigerants were $23.7\sim27.9\%$ lower than that of R502. For all alternative refrigerants, the amount of charge was reduced up to $60\%$ as compared to R502. Overall, these alternative refrigerants offer better system performance and reliability than R502 and can be used as long term substitutes for R502 due to their excellent environmental properties.

• Korean journal of applied entomology
• /
• v.24 no.2 s.63
• /
• pp.79-83
• /
• 1985

Plant damages and yields of the different rice cultivars to brown planthopper (BPR), Nilaparvata lugens S., were observed for the evaluation of varietal resistance in paddy fields. Twenty nine Korean cultivas were transplanted in paddy fields with three plots of no insecticide, no insecticide and fungicide, and no fungicide at Haenam, southern coastal area in 1983. Among 6 varieties with BPR resistant genes, Samgang, Gaya, Hangangchal, and Cheongcheong showed very low populations of BPR and no damages on all treatments. Milyang 30 and Wonpung among them had considerable populations of BPR. Seokwang and 23 others showed high populations and serious damages. Yield increasea(%) with insecticides were low on Gaya(12%), Samgang(29%) and Hangangchal(35%), but very high on Bongkwang(260%), Palgueum(223%), Songjeon(200%), and Guanauk(200%).

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.299-303
• /
• 2015

The electrolyte is an important component in determining the performance of Fuel Cells. Especially, investigation of the conduction properties of electrolytes plays a key role in determining the performance of the electrolyte. The electrochemical properties of Yttrium stabilized zirconia (YSZ) were measured to allow the use of this material as an electrolyte for solid oxide fuel cells (SOFC) in the temperature range of $700-1000^{\circ}C$ and in $0.21{\leq}pO_2/atm{\leq}10^{-23}$. A Hebb-Wagner polarization experimental cell was optimally manufactured; here we discuss typical problems associated with making cells. The partial conductivities due to electrons and holes for 8YSZ, which is known as a superior oxygen conductor, were obtained using I-V characteristics based on the Hebb-Wagner polarization method. Activation energies for holes and electrons are $3.99{\pm}0.17eV$ and $1.70{\pm}0.06eV$ respectively. Further, we calculated the oxygen ion conductivity with electron, hole, and total conductivity, which was obtained by DC four probe conductivity measurements. The oxygen ion conductivity was dependent on the temperature; the activation energy was $0.80{\pm}0.10eV$. The electrolyte domain was determined from the top limit, bottom limit, and boundary (p=n) of the oxygen partial pressure. As a result, the electrolyte domain was widely presented in an extensive range of oxygen partial pressures and temperatures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.1
• /
• pp.19-23
• /
• 2018

In a Pb-included piezoelectric composition, $Sr_yPb_{1-y}[(Zn_{1/3}Nb_{2/3})_x-(Ni_{1/3}Nb_{2/3})_{0.2}-(Zr_{0.46}Ti_{0.54})_{0.8-x}]O_3$ was selected in order to attain high piezoelectric properties. According to the PZN ratio (x) and the amount of Sr doping (y), the crystal structure, microstructure and piezoelectric properties were measured and evaluated. In the case of Sr 4 mol% doping, the piezoelectric properties were the highest for a PZN ratio of 0.1. In this condition, the grain size was larger and the intensity was higher. With the PZN ratio fixed and varying the Sr doping, the piezoelectric properties increased until 10 mol% doping and then decreased for over 12 mol% doping. In the case of x＝0.1 and y＝10 mol%, the best piezoelectric properties were obtained, i.e., $d_{33}=660pC/N$ and $k_p=68.5%$, and these values seem to be related to the grain size and crystal structure.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.193-200
• /
• 2007

The AOPs research defined by creating a sufficient amount of OH radicals from the dissolution of organic materials through photoxidation and research for a complete elimination of residual organic materials by membrane are actively ongoing. This research focuses on the hybrid processing of AOPs and M/F membrane to dissolve and eliminate organic chemicals in drinking water which are suspected of carcinogens. For this purpose, underground water was used as a source of drinking water for the hybrid processing of AOPs oxidation and M/F membrane, and a pilot plant test device was installed indoor. Carcinogenic chemicals of VOCs and pesticide were artificially mixed with the drinking water, which was then diluted close to natural water in order to examine treatment efficiency and draw optimal operation conditions. The samples used for this experiment include four chemicals phenol, chloroform, in VOCs and parathion, carbaryl in pesticide. As a result of the experiments conducted with simple, and compound solutions, the conditions to sufficiently dissolve and eliminate carcinogenic chemicals from the hybrid processing of where carcinogens were artificially added are : (hydrogen peroxide) prescribed solution 100 mg/L under pH 5.5~6.0, and the temperature $12{\sim}16^{\circ}C$, at the normal temperature and pressure. $d-O_3$ volume of 5.0 ppm and above and 30-40 minutes of reaction time are most appropriate and using MF/UF for membrane was ideal.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.121-144
• /
• 2007

In general, the design of container yard and container handling system on container terminal are focused on operation of shipside than service about chassis from outside(C/O). It is not efficient for chassis from outside. The purpose of this paper is functional assessment of efficient container terminal and for higher performance of container terminal. first, the items which are concerned with container handling at the planning of container terminal are investigated and extracted through the practical data analysis of container terminal. Also, verified problems of planning and present condition through the functional assessment. Secondly, the improvements for container throughput in container yard are proposed and examined the effectiveness of improvements about queuing time of chassis from outside and service time of transfer crane by the evaluation decision model based upon multi criteria objectives.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.2
• /
• pp.23-26
• /
• 2007

The influence of water partial pressure in Metal-organic Deposition (MOD) method was investigated on the texture and the morphology of $YBa_2Cu_3O_{7-x}$ (YBCO) films grown on the buffered metal tapes. The water partial pressure was varied from 4.2% up to 10.0% with the other process variables, such as annealing temperature and oxygen partial pressure, kept constant. In this work, the fluorine-free Y & Cu precursor solution added with Sm was synthesized and coated by the continuous slot-die coating & calcination step. The next annealing step of the YBCO films was done by the reel-to-reel method with the gas flowed vertically down. From the x-ray diffraction analysis, the un-reacted phase like $BaF_2$ peak was found at the water partial pressure of 4.2%, but $BaF_2$ peak intensity is much reduced as the water partial pressure is increased. However, the higher water partial pressure of about 10% in this experiment leads to the poor crystallinity of YBCO films. The morphologies of the YBCO films were not different from each other when the water partial pressure was varied in this work. The maximum critical current density of 3.8MA/$cm^2$ was obtained at the water partial pressure of 6.2% with the annealing temperature of 780$^{\circ}C$ and oxygen partial pressure of 500ppm.

• Journal of Veterinary Science
• /
• v.23 no.1
• /
• pp.9.1-9.11
• /
• 2022

Background: Escherichia coli, which causes subclinical or clinical mastitis in cattle, is responsible for transmitting antimicrobial resistance via human consumption of raw milk or raw milk products. Objectives: The objective of this study was to investigate the molecular characteristics of 183 E. coli from bulk tank milk of five different dairy factories in Korea. Methods: The molecular characteristics of E. coli such as serogroup, virulence, antimicrobial resistance, and integron genes were detected using polymerase chain reaction and antimicrobial susceptibility were tested using the disk diffusion test. Results: In the distribution of phylogenetic groups, group D was the most prevalent (59.6%) and followed by group B1 (25.1%). The most predominant serogroup was O173 (15.3%), and a total of 46 different serotypes were detected. The virulence gene found most often was fimH (73.2%), and stx1, fimH, incC, fyuA, and iutA genes were significantly higher in isolates of phylogenetic group B1 compared to phylogenetic groups A, B2, and D (p < 0.05). Among 64 E. coli isolates that showed resistance to at least one antimicrobial, the highest resistance rate was observed for tetracyclines (37.5%). All 18 integron-positive E. coli carried the integron class I (int1) gene, and three different gene cassette arrangements, dfrA12+aadA2 (2 isolates), aac(6')-Ib3+aac(6')-Ib-cr+aadA4 (2 isolates), and dfrA17+aadA5 (1 isolate) were detected. Conclusions: These data suggest that the E. coli from bulk tank milk can be an indicator for dissemination of antimicrobial resistance and virulence factors via cross-contamination.

• Animal Bioscience
• /
• v.37 no.4_spc
• /
• pp.730-741
• /
• 2024

Pig production is one of the viable enterprises of the livestock sub-sector of agriculture. It contributes significantly to the economy and animal protein supply to enhance food security in Africa and globally. This article explored the present status of pig production in Africa, the challenges, prospects and potentials. The pig population of Africa represents 4.6% of the global pig population. They are widely distributed across Africa except in Northern Africa where pig production is not popular due to religio-cultural reasons. They are mostly reared in rural parts of Africa by smallholder farmers, informing why majority of the pig population in most parts of Africa are indigenous breeds and their crosses. Pig plays important roles in the sustenance of livelihood in the rural communities and have cultural and social significance. The pig production system in Africa is predominantly traditional, but rapidly growing and transforming into the modern system. The annual pork production in Africa has grown from less than a million tonnes in year 2000 to over 2 million tonnes in 2021. Incidence of disease outbreak, especially African swine fever is one of the main constraints affecting pig production in Africa. Others are lack of skills and technical know-how, high ambient temperature, limited access to high-quality breeds, high cost of feed ingredients and veterinary inputs, unfriendly government policies, religious and cultural bias, inadequate processing facilities as well as under-developed value-chain. The projected human population of 2.5 billion in Africa by 2050, increasing urbanization and decreasing farming population are pointers to the need for increased food production. The production systems of pigs in Africa requires developmental research, improvements in housing, feed production and manufacturing, animal health, processing, capacity building and pig friendly policies for improved productivity and facilitation of export.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.119-128
• /
• 2003

The two experiments in this study compared litter nitrogen (N) contents after broiler chicks were raised for 42 days. Experiment I compared litter treated with aluminum sulfate (alum) [Al$_2$(SO$_4$)$_3$ㆍ14$H_2O$] (T$_1$) with nontreated litter (T$_2$) when the broiler chicks were fed the same levels of dietary protein (23% for 0∼3 weeks, 21% for 4∼6 weeks) Experiment 2 compared the alum treated litters of broiler chicks fed high protein diets (T$_3$) having 20.4% protein for 0∼3 weeks and 19.3% for 4∼6 weeks, with lower protein diets (T$_4$) having protein levels of 18.0% for 0∼3 weeks and 17.0% for 4 6 weeks. Each treatment had four replicate cages. As shown in Table 1, T$_1$ had a significantly (P<0.0l) lower pH and significantly (P<0.05) higher total N (TN), NH$_4$-N and inorganic N (IN) than T$_2$. T$_1$ and T$_2$ had similar moisture, organic carbon (OC), NO$_3$-N and organic N (ON). Alum treatment increased available N (AN) significantly (P<0.05) from 13.75$\pm$0.0l mg/g to 14.90$\pm$0.01 mg/g and predicted available N (PAN) significantly (P<0.05) from 15.00$\pm$0.0l to 16.50$\pm$0.02. The C : N ratios were 18.84$\pm$0.40 (T$_1$) and 19.46$\pm$0.10 (T$_2$) while the C : ON ratios were 28.49$\pm$1.15 (T$_1$) and 28.34$\pm$0.20 (T$_2$) although C : N ratios or C : ON ratios did not show any difference between T$_1$ and T$_2$. In Table 2, T$_3$ had significantly (P<0.05) higher moisture, TN, NH$_4$-N, ON and IN than T$_4$, while the pH, OC and NO$_3$-N were similar in both groups. The AN of T$_3$ increased significantly (P<0.05) from 10.99$\pm$0.0l mg/g to 12.98$\pm$0.03 mg/g, while the PAN increased significantly (P<0.05) from 12.39$\pm$0.10 mg/g (T$_4$) to 14.68$\pm$ 0.30 mg/g (T$_3$). The C : N ratios increased significantly (P<0.0l) from 20.07$\pm$0.20 (T$_3$) to 24.40$\pm$0.10 (T$_3$). The C : ON ratios also increased significantly (P<0.0l) from 28.99$\pm$1.15 (T$_3$) to 35.51$\pm$0.20 (T$_4$). These current research results show increased AN contents and PAN contents in alum treated litter or with increased CP levels regardless of alum treatment. However, none of the litters in this study could initially increase mineralization.