• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.607-612
• /
• 2006

Universal Mobile Telecommunications System (UMTS) and Wireless Local Area Network (WLAN) have been developed independently. Then, many researchers have studied UMTS-WLAN interworking architecture for the efficiency. However, the transmission capacity difference of two networks causes the transmission quality degradation. Therefore, this paper proposes a UMTS-WLAN interworking architecture for Quality of Service (QoS). The proposed architecture is based on tight coupling and dynamically guarantees QoS by the mobility prediction method. The proposed architecture is simulated by ns-2. Performance experimental results show that the proposed architecture reduces the handover dropping probability comparing with the existing method and enhances the amount of receiving packets comparing with the method without guaranteeing QoS.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.107-112
• /
• 2013

The purpose of this study is to analyze an insulation property and to establish a design standard for the underground space in architecture. Insulation materials for this study are 12 kinds of Insulation which qualified KS standards(3 classes of EPS type 1, 3 classes of EPS type 2(Neopor), 3 classes of XPS and 3 classes of PU Boards). For insulation materials of underground space, insulating and water tightening property are desired. So conductivity for insulating and water absorption for water tightening are measured in this study. Temperature, insulation is exposed to in the underground space, is different from temperature above the ground. Conductivity is measured in a temperature of $17^{\circ}C$, $20^{\circ}C$, $23^{\circ}C$ and $26^{\circ}C$. In KS standards, water absorption are measure after 24 hours, but insulation is exposed to water for a long time in the underground. So after 110 days, water absorption are measured. As time goes by, increasing of water absorption means decreasing of water tightening and insulating. So after water absorption had measured for 110 days, conductivity has measured again. As a result, XPS is selected as optimized insulation for underground. And Conductivity of XPS insulation with water should be added by 20%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.104-104
• /
• 1998

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.163-176
• /
• 2016

The contention overhead on the same channel in an NoC architecture can significantly increase a communication delay due to the simultaneous communication requests that occur. To reduce the overall overhead, we propose task-to-tile binding techniques for an NoC-based manycore platform, whereby it is assumed that the task mapping decision has already made. Since the NoC architecture may have multiple memory tiles as its size grows, memory clustering is used to balance the load of memory by making applications access different memory tiles. We assume that the information on the communication overhead of each application is known since it is specified in a dataflow task graph. Using this information, this paper proposes two heurisitics that perform binding of multiple tasks at once based on a proper memory clustering method. Experiments with an NoC simulator prove that the proposed heurisitic shows performance gains that are 25% greater than that of the previous binding heuristic.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.87-96
• /
• 2007

This study analyzes the place of modem architecture based on the place theory of C. N, Schultz. For applying Schultz's theory to the modern architecture, It is required to examine the modern cityscape, features of inner space of architecture and features of program. By analyzing the avant-garde architecture of Rem Koolhaas on such basis, the potentiality of placeness of modern architecture could be verified and the alternatives would be searched. It is inferred that the placeness features of Rem Koolhaas' public architecture is under the influence of the interpretation of program based on the humane background rather than the physical aspects of surroundings. The inner space shows the non-linear features, the metaphor of city. The obscurity of physical boundary illustrates the flexible features with ambiguous boundary. Consequently, the inner space expresses the surreal atmosphere that doesn't match the purposes of usage of architecture, the traditional concept. The outer shape is recognized as the by-product from the interpretation of internal program rather than it considered the surrounding context. The outer shape has the relatively simple formative shape and contrasts against the complicated inner space by using the non-physical materials. It is found that Koolhaas' architecture doesn't pursue the features of placeness of traditional concept. However, It is inferred that his architecture has the possibility of placeness by attaching the meaning through the social roles of each architecture. It gives the substantial suggestion to the modern architecture that can't easily acquire the placeness of traditional concept due to the environment of modern city.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.137-142
• /
• 2012

This paper proposes a software development guidance and an evaluation index for the productivity related to Spring 2.5 and EJB 3.0 with same lightweight container architecture. Spring is a known successful open source standard model for lightweight container architecture. EJB in an enterprise environment as a standard framework is most commonly used in production. However, there is no comparison research about the performance of Spring 2.5 and EJB 3.0 Framework with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. In this study, the development platform environment based on the same pilot system Spring 2.5 and EJB 3.0 framework is in the design and implementation. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.169-178
• /
• 2024

This study aimed to investigate the impact of pavement design changes on user perceptions, with the objective of enhancing safety in urban streetscape. A total of 72 participants were recruited, and the study focused on alleyways in areas with a high risk of crime. Employing the Semantic Differential (SD) methodology, an assessment was conducted to gauge participants' perceptions of three different pavement types (A-type, B-type, C-type) as well as the existing pavement. The results indicated that the C-type pavement, characterized by vibrant and harmonious color palettes and patterns, elicited the highest levels of perceived safety, comfort, and openness among users. This signifies that physical environmental improvements through color design can mitigate the feelings of insecurity and foster emotional stability. Therefore it is recommended to implement various color schemes and pattern designs to road surface for enhancing user safety in high-risk urban areas.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.520-528
• /
• 2000

he speed of microprocessor getting faster, the data transfer width between the microprocessor and the memory becomes a critical part to limit the system performance. So the study of the computer architecture with the high code density is cmerged. In this paper, a tentative Bi-Length Instruction Set Computer(BISC) that consists of 16 bit and 32 bit length instructions is proposed as the high code density 32 bit microprocessor architecture. The 32 bit BISC has 16 general purpose registers and two kinds of instructions due to the length of offset and the size of immediate operand. The proposed 32 bit BISC is implemented by FPGA, and all of its functions are tested and verified at 1.8432MHz. And the cross assembler, the cross C/C++ compiler and the instruction simulator of the 32 bit BISC are designed and verified. This paper also proves that the code density of 32 bit BISC is much higher than the one of traditional architecture, it accounts for 130~220% of RISC and 130~140% of CISC. As a consequence, the BISC is suitable for the next generation computer architecture because it needs less data transfer width. And its small memory requirement offers that it could be useful for the embedded microprocessor.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.113-116
• /
• 1999

This paper presents a hardware architecture of AAL(ATM Adaptation Layer) type 2 switch. The proposed architecture can assign and configure maximum AAL2 CID limit. AAL2 is the protocol which has been recommended by ITU-T and ATM-Forum for low bit rate delay sensitive services. The architecture assumes 155 Mbps STM-1/STS-3c physical interface, maximum VCC can be 64K connections. It can support maximum 16,384M AAL2 connections. For efficient use of peripheral memory, a concept of segment address was proposed. The proposed AAL2 switch hardware architecture can be used in ATM network as a standalone server or embedded module in a ATM switching system.