• 한국지반신소재학회논문집
• /
• 제10권1호
• /
• pp.37-42
• /
• 2011

본 연구에서는 아스팔트순환골재를 이용한 투수성 콘크리트의 역학적 특성을 알아보기 위하여 투수성 콘크리트의 단위시멘트량, 잔골재 비율, 물시멘트(w/c)비의 혼합율 변화에 따른 역학적 특성과 구조체로서 요구되는 소요강도에 대하여 분석하고자 하였다. 순환골재의 사용성을 높이기 위하여 입도조정 없이 13mm 아스팔트순환골재를 사용하였으며, 물시멘트비는 빈배합이 되도록 결정하였다. 분석결과 압축강도는 18.2~19.5Mpa을 보였으며 투수계수는 평균적으로 8.0E-02cm/sec 값을 나타내었다.

• Wind and Structures
• /
• 제18권1호
• /
• pp.83-101
• /
• 2014

Lamps installed on stay cables of cable-stayed bridges may alter the configuration of circular cross section of the cables and therefore result in aerodynamically unstable cable vibrations. The background of this study is a preliminary design of lamp installation on the cable-stayed He-dong Bridge in Guangzhou, China. Force measurements and dynamic response measurements wind tunnel tests were carried out to validate the possibility of cable galloping vibrations. It is observed that galloping will occur and the critical wind velocity is far less than the design wind velocity at Guangzhou City stipulated in Chinese Code. Numerical simulations utilizing software ANSYS CFX were subsequently performed and almost the same results as the wind tunnel tests were obtained. Moreover, the pressure and velocity contours around cable-lamp model obtained from numerical simulations indicated that the upstream steel wire in the preliminary design is the key factor for the onset of the galloping vibrations. A modification for the preliminary design of lamp installation, which suggests to remove the two parallel steel wires, is proposed, and it effectiveness is validated in further wind tunnel tests.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.121-131
• /
• 2010

Betula platyphylla var. japonica and Betula ermanii segregate vertically at an elevation of approximately 1,850 m on Mt. Neko in Nagano Prefecture, Japan. B. platyphylla var. japonica and B. ermanii were the dominant species below and above this altitude, at which the mean-annual and growing-season air temperatures were $4^{\circ}C$ and $14.1^{\circ}C$, respectively. Based on a modification of Kira's warmth index which employs cumulative temperature represented as $^{\circ}C$ day, leaf unfolding in both species was observed to be initiated at $58^{\circ}C$ day and $169^{\circ}C$ day, respectively. In 1996, leaf unfolding was initiated on 18 May in B. platyphylla var. japonica (+/-6 days) and on 5 June in B. ermanii (+/-8 days), shortly after the last frost which occurred on 5 May 1995 above 1,850 m; below this elevation there was no risk of frost at the time. At elevations above 1,850 m, the unfolded leaves of B. platyphylla were damaged by late frost, while B. ermanii escaped injury because the leaves were still protected by winter buds. The optimum temperature for seed germination in both B. platyphylla and B. ermanii was $30^{\circ}C$. Temperature alternation from 10 to $30^{\circ}C$ and moist storage of seeds at $4^{\circ}C$ (stratification) prior to incubation increased germination rates in both species. The seedlings of B. ermanii had a greater survival rates than those of B. platyphylla var. japonica when planted above 1,850 m. Comparisons of the timing of leaf unfolding and the latest frost at a site appeared to be the main factors affecting the vertical distribution of these species.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권12호
• /
• pp.1684-1690
• /
• 2005

Using mRNA differential display technique, we investigated differential gene expression in hybrids relative to their parents in a diallel cross involving four chicken breeds in order to provide an insight into the molecular basis of heterosis in chicken. The results indicated that there was extensive differential gene expression between chicken F1 hybrids and their parents which was classified into four kinds of patterns as following: (1) bands only detected in hybrid F1; (2) bands only absent in hybrid F1; (3) bands only detected in parent P1 or P2; (4) bands absent in parent P1 or P2. Forty-two differentially expressed cDNAs were cloned and sequenced, and their expression patterns were confirmed by Reverse-Northern dot blot. Sequence analysis and database searches revealed that genes showed differential expression between hybrid and parents were regulatory and functional genes involved in metabolism, mRNA splicing, transcriptional regulation, cell cycles and protein modification. These results indicated that hybridization between two parents can cause changes in expression of a variety of genes. In conclusion, that the altered pattern of gene expression in hybrids may be responsible for heterosis in chickens.

• Applied Microscopy
• /
• 제42권1호
• /
• pp.43-48
• /
• 2012

본 연구는 ceresin 왁스와 candellila 왁스 및 microcrystalline왁스를 혼합하고 액체파라핀 오일을 첨가하여 성형한 립스틱(LS-1, LS-2)과 capric/caprylic triglyceride 오일을 첨가하여 성형한 립스틱(LS-3, LS-4)을 각각 제조하여 성형 후 $5^{\circ}C$ 냉장실에 보관한 립스틱(LS-1, LS-3)과 성형 후 냉장실($5^{\circ}C$)에 18시간 방치한 후 항온기($45^{\circ}C$)에 5시간 보관한 다음 냉장실($5^{\circ}C$)에서 계속 보관한 립스틱(LS-2, LS-4) 왁스의 3차원적 구조를 주사전자현미경으로 관찰하였다. $5^{\circ}C$ 냉장실에서 보관된 LS-1과 LS-3 립스틱 왁스 구조는 오일의 종류와 관계없이 $45^{\circ}C$ 항온기에 5시간 방치한 다음 냉장실($5^{\circ}C$)에 보관한 LS-2과 LS-4 립스틱의 구조보다 깨끗한 모양을 하고 있었다. 또한, 왁스구조의 크기도 사용한 왁스의 종류와 관계없이 성형 후 보관온도가 증가함에 따라 왁스의 3차원적 구조가 변형되는 것으로 확인되었다. 본 연구결과 립스틱의 성형 후 보관온도가 증가하면 왁스구조의 크기가 증가하고 모양도 불규칙하게 변형되어 오일의 발한현상을 일으킬 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.60-60
• /
• 2000

The adhesion interface formation between copper and poly(ethylene terephthalate)(PET), poly(methyl methacrylate)(PMMA) and Polyimide films was treated using Ion assisted reaction system to sequential sputter deposition by High-Frequency ion source. The ion beam modification system used a new type of low power HF ion thruster for space application as new low thruster electric propulsion system. Low power HF ion thruster with diameter 100mm gives the opportunity to obtain beams of Ar+ with currents 20~150 mA (current density 0.5~3.5 mA/cm2) and energy 200~2500eV at HF power level 10~150 W. Using Ar as a working gas it is possible to obtain thrust within 3~8 mN. Contact angles for untreated films were over 95$^{\circ}$ and 80 for Pet, 10o for PMMA and 12o for PI samples as a condition of ion assisted reaction at the ion dose of 10$\times$1016 ions/cm2, the ion beam potential of 1.2 keV and 4 ml/min for environmental gas flow rate. 900o peel tests yielded values of 15 to 35 for PET, 18 to 40 and 12 to 36 g/min. respectively. High resolution X-ray photoelectron spectrocopy is the Cls region for Cu metal on these polymer substrates showed increases in C=O-O groups for polymide, whereas PET and PMMA treated samples showed only C=O groups with increase the ion dose. Finally, unstable polymer surface can be changed from hydrophobic to hydrophilic formation such as C-O and C=O that were confirmed by the XPS analysis, conclusionally, the ion assisted reaction is very effective tools to attach reactive ion species to form functional groups on C-C bond chains of PET, PMMA and PI.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.629-632
• /
• 2009

The polymeric desiccant rotor is made from the super absorbent polymer by ion modification. The moisture sorption capacity of the super desiccant polymer(SDP) is 4 to 5 times larger than those of common desiccant meterials such as silica gel or zeolite. It is also known that SDP can be regenerated even at the relatively low temperature. To fabricate the desiccant rotor, firstly the SDP was laminated by coating the SDP on polyethylene sheet. Then corrugated and rolled up into a rotor. The diameter, the depth, the dimensions of the corrugated channel, etc. were pre-determined from numerical simulation on the heat and mass transfer in the desiccant rotor. The dehumidification performance was tested in a climate chamber. The relevant tests were carried out at the process air inlet temperature of $32^{\circ}C$, the regeneration air inlet temperature of $60^{\circ}C$ and the inlet dew-point temperature of both the process air and the regeneration air of $18.5^{\circ}C$, when the rotation period is long, the moisture sorption is not effective. In the desiccant rotor developed in this study, the optimum rotation period is found about 350s at the regeneration temperature of $60^{\circ}C$. It was found from further experiments that the optimum rotation tends to decreases as the regeneration temperature increases. Meanwhile, the outlet temperature of the process air deceases monotonically as the rotation period increases.

• ALGAE
• /
• 제34권2호
• /
• pp.153-162
• /
• 2019

Anthropogenic disturbances, including coastal habitat modification and climate change are threatening the stability of kelp beds, one of the most diverse and productive marine ecosystems. To test the effect of temperature and irradiance on the microscopic gametophyte and juvenile sporophyte stages of the rare kelp, Saccharina angustissima, from Casco Bay, Maine, USA, we carried out two sets of experiments using a temperature gradient table. The first set of experiments combined temperatures between $7-18^{\circ}C$ with irradiance at 20, 40, and $80{\mu}mol\;photons\;m^{-2}\;s^{-1}$. The second set combined temperatures of $3-13^{\circ}C$ with irradiance of 10, 100, and $200{\mu}mol\;photons\;m^{-2}\;s^{-1}$. Over two separate 4-week trials, in 2014 and again in 2015, we monitored gametogenesis, the early growth stages of the gametophytes, and early sporophyte development of this kelp. Gametophytes grew best at temperatures of $8-13^{\circ}C$ at the lowest irradiance of $10-{\mu}mol\;photons\;m^{-2}\;s^{-1}$. Light had a significant effect on both male and female gametophyte growth only at the higher temperatures. Temperatures of $8-15^{\circ}C$ and irradiance levels of $10-100{\mu}mol\;photons\;m^{-2}\;s^{-1}$ were conditions for the highest sporophyte growth. Sporophyte and male gametophyte growth was reduced at both temperature extremes-the hottest and coldest temperatures tested. S. angustissima is a unique kelp species known only from a very narrow geographic region along the coast of Maine, USA. The coupling of global warming with high light intensity effects might pose stress on the early life-history stages of this kelp, although, as an intertidal species, it could also be better adapted to temperature and light extremes than its subtidal counterpart, Saccharina latissima.

• 핵의학기술
• /
• 제13권3호
• /
• pp.61-66
• /
• 2009

목적: 사구체여과율(Glomerular Filtration Rate, GFR)은 신장 기능의 평가, 의심되는 신장질환의 진단 및 만성적인 신질환에서의 질병의 경과 관찰에 중요한 지표가 되며 다양한 방법을 이용하여 측정할 수 있다. 본 연구에서는 Gates 방법으로 측정되는 사구체여과율, 혈청 크레아티닌을 기초로 한 Cockcroft-Gault (C-G), Modification of Diet in Renal Disease (MDRD) 공식으로 계산한 사구체여과율을 비교하고자 하였다. 실험재료 및 방법: 18세 이상의 다양한 신기능을 가진 217명(남자 127명, 여자 90명, 평균 연령 $51.3{\pm}16.9$세)을 대상으로 하였다. $^{99m}Tc$-DTPA GFR과 혈청 크레아티닌(Serum Cr)을 기초로 한 C-G공식, MDRD 공식으로 계산한 사구체여과율을 비교 분석하였다. 결과: $^{99m}Tc$-DTPA (Gates) GFR은 C-G공식(r=0.864, p<0.0001) 및 MDRD 공식(r=0.831, p<0.0001)과 각각 유의한 상관관계가 있었고, C-C 공식과 MDRD 공식을 이용한 사구체 여과율 사이에도 상관관계가 우수하였다(r=0.933, p<0.0001). 혈청 크레아티닌의 평균은 $3.0{\pm}3.1\;mg/dL$으로 정상 신기능(Scr<1.5mg/dL) 환자에서 $^{99m}Tc$-DTPA GFR (Gates)과 C-G공식(p<0.0001), MDRD 공식(p<0.0001)은 통계적으로 유의하였다. 경증 신부전(Scr 1.5~4.0 mg/dL) 환자에서 Tc-99m DTPA (Gates) GFR과 C-G 공식(p=0.181), MDRD 공식(p=0.127)은 유의한 차이는 없었다. 중증 신부전(Scr>4.0 mg/dL) 환자에서 $^{99m}Tc$-DTPA (Gates) GFR과 C-G 공식(p<0.0001), MDRD 공식(p<0.0001)은 통계적으로 유의하였다. 결론: Gates 방법을 이용한 사구체여과율, C-G, MDRD 공식으로 계산한 사구체여과율 사이에 유의한 상관관계를 확인하였다. 정상 신기능 환자에서 $^{99m}Tc$-DTPA (Gates) GFR은 C-G, MDRD 공식보다 각각 낮았다. 경증 신부전 환자에서 $^{99m}Tc$-DTPA (Gates) GFR과 C-G 공식, MDRD 공식으로 계산한 사구체여과율은 유사하였고, 중증 신부전 환자에서 $^{99m}Tc$-DTPA (Gates) GFR은 C-G, MDRD 공식에 비해 사구체여과율을 과대평가하였다. 신기능의 정도에 따라 사구체여 과율을 평가하는데 있어 어떠한 측정방법이 더 우월한지는 분명하지 않다.