• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.551-558
• /
• 2003

This study was conducted to investigate the effect of dietary wormwood powder (Artemisia montana Pampan; WP) supplementation on growing performance and fecal noxious gas emission in weanling pigs. One hundred and twelve pigs were alloted into four treatments and offered for 4 weeks one of the diets supplemented with 0% (control), 0.5% (0.5), 1.0% (1.0) and 2.0% (2.0) WP. Each treatments has four replicate with 7 pigs per replicate. ADG, ADFI and F/G were improved by 1.0 and 2.0 WP supplementation during 0d${\sim}$14d feeding. Feed intake of 1.0 WP diet was higher (P<0.05) than any other diet during 15d${\sim}$28d feeding. But there were no differences among the other treatments in the weight gain and feed conversion. During the whole feeding period, daily weight gain and feed intake of pigs fed 1.0 and 2.0 treatments were higher than those of pigs fed control and 0.5 diet. DM digestibility was significantly (P<0.05) higher in weanling pigs fed 0.5, 1.0 and 2.0 WP than that of the control. The protein digestibility was significantly improved in 1.0 WP treatment and the phosphorus digestibility was improved in 2.0 WP treatment. Excretion of nitrogen and phosphorus was significantly (P<0.05) decreased by 2.0 treatment than control. Emission of fecal ammonia after 48 hours storage in vinyl bag dramatically decreased by all the treatments except control. However, there was no statistical difference in fecal hydrogen sulfide emission among treatments. In conclusion, this study suggested that the dietary 1.0${\sim}$2.0 supplementation of WP can improve productivity of pigs decrease fecal $NH_3$ and $H_2S$ gas emission.

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.15-20
• /
• 2006

EDTA is known to have bacteriocidal effect on Vibrio vulnificus, pathogen of septicemia by osmotic shock in seafoods. Attempts were made to elucidate the bacteriocidal effect of phytic acid (PA) as a substitute for EDTA against V. vulnificus and its inhibition effect on the septicemia, which induces liver damage of the mice by the pathogen. Viable cells of V. vulnificus with the initial titre of $1.7{\times}10^6$ c.f.u. $ml^{-1}$ decreased by 90.6% after 1 min and 99.6% after 5 min in distilled water. The titre decreased by 65.9% and 94.5% in 2 mM solution of $Mg^{2+}$. In 0.1 mM solution of PA, the rate of decrease in titre was 97.4% after 1 min of incubation and 99.8% after 5 min, compared to 95.7% and 99.8% in 0.1 mM solution of EDTA. The bacteriocidal effect of PA solution at a concentration of 1 mM was marked: the rate of decrease in titre was 99.9% after 1 min. In relation to the bacteriocidal effect, PA was evaluated as a potential therapeutic agent for V. vulnificus septicemia in mouse. When the survival periods of mice were investigated by PA and EDTA treatment after the pathogen injection, the group of mice which infected by a low concentration of the strain survived longer than that inoculated at high concentration; also, the ratio of survival was 1.3 times higher in PA than in EDTA, showing that the fatal rate depended on the inoculation concentration. Although survival periods of mice induced with liver damage by carbon tetrachloride and then inoculated with the strain showed a similar trend, the fatal rate of mice was 2 times faster than those inoculated with only pathogen into normal liver, These results indicate that the infection by V. vulnificus was more fatal to those with liver disease. Also, symptoms of hemorrhage and inflammation on the mice with induced liver damage were reduced in case there was phytic acid treatment at each concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1343-1356
• /
• 2008

The evaluation of microbiological quality for school food samples collected from 19 selected middle and high schools located in Seoul was undertaken. Eighty-nine food samples consisting of 38 non-pretreated vegetables, 13 pre-washed and cut vegetables, 9 meats and poultry, 3 fish and shellfish, 7 dried fish, and shellfish and 20 processed foods were collected. Aerobic plate count, total coliforms, and Escherichia coli (E. coli ) were detected using $Petrifilm^{TM}$, and the food-borne pathogens were screened by multiplex PCR with species-specific primer sets. Sequentially, the quantitative and confirmative test of the food-borne pathogens were carried out with the selective media and biochemical kits. The contamination of coliform counts was observed on the pre-washed vegetables ($3.4{\sim}4.3\;log\;CFU/g$) and meats ($2.2{\sim}4.3\;log\;CFU/g$). Also, the cooked foods were heavily contaminated with coliform, ranging from 1.0 to $5.5\;log\;CFU/g$. E. coli counts were found in 16 raw and cooked food samples, exceeding the microbiological standards for the guideline of safety management for school foods. Through PCR detection, B acillus cereus was detected in 32 raw and cooked foods, and quantitatively found in pre-washed carrot, radish, and pan-broiled dried shrimp and filefish ranging from $2.3{\sim}3.6\;log\;CFU/g$, respectively. E. coli O157:H7 was detected on frozen pork sample and was confirmed with API kit. Campylobacter jejuni was found in 3 ready-to-eat type vegetables. Vibrio parahaemolyticus were found in 4 pre-washed vegetables and 2 cooked foods, indicating unsatisfactory quality based upon the microbiological standards of ready-to-eat vegetables and cooked foods by Korea Food and Drug Administration. Salmonella spp. was detected in frozen chicken sample and confirmed by API kit and latex antisera agglutination.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.3
• /
• pp.194-199
• /
• 2008

Background: Early identification of pathogens can improve the prognosis of patients with ventilator associated pneumonia (VAP). In the present study, we evaluated the feasibility of performing multiplex PCR for endotracheal aspirates to detect three important pathogens (P. aeruginosa, K. pneumoniae and MRSA) in patients with VAP. Methods: The endotracheal aspirates of 24 patients were collected within 24 hours of the diagnosis of VAP for performing multiplex PCR. Forward and reverse primers were designed to target the specific site of each pathogen (the oprL gene for P. aeruginosa, 16S rRNA for K. pneumoniae and the mec gene for MRSA). We analyzed the clinical data of the VAP patients, including the culture reports for the endotracheal aspirates. Results: Twenty-four patients (M:F=18:6, mean age=$70{\pm}11$) with VAP were enrolled. Pathogens were isolated from 11 patients (P. aeruginosa in 2, K. pneumoniae in 1, MRSA in 2, other enteric Gram negative bacilli in 3, S. pneumoniae in 2 and mixed infection in 1). Multiplex PCR detected three cases of P.aeruginosa (2 cases coincided with the culture reports) and four cases of K. pneumoniae (1 matched with the culture report). PCR detected two MRSA cases, which did not coincide with the culture reports. Conclusion: Multiplex PCR of the endotracheal aspirate showed some ability to detect Gram negative bacilli, although caution is required when interpreting the results.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.177-184
• /
• 2005

This study was conducted to investigate the effects of recombinant bovine somatotropin (rbST) injection on conception and parturition rates in normal or repeat breeding Hanwoo. We treated 462 cows containing 79 repeat-breeding cows of multiparous and allocating 5 treatment groups. Treatment 1 (T1) was injection of 2ml saline (for pseudo treatment), T2 was one injection of rbST 250mg into the tailhead region at the estrus, T3 was twice injection of rbST 250mg both at the time of insemination and again 10 to 14 day later, T4 was once injection of rbST 500mg at insemination and T5 was twice injection of 500mg rbST both at the time of insemination and again 10 to 14day later respectively. In rbST treated groups, timed artificial inseminations (TAI) were performed fellowing estrus synchronization. 100 us GnRH was injected into the scapula region on Day 0, 25mg $PGF_2{\alpha}$ was injected on Day 7 for degeneration of corpus luteum (CL) and 100ug GnRH was injected for inducing the synchronization. The results are as fellows; When normal Hanwoo were inseminated once with rbST administration, the pregnancy rate of T2 $(67.5\pm18.48\%)$ were higher than control $(52.4\pm9.72\%)$, while the pregnancy rate of T4 $(63.3\pm5.77\%)$ were significantly higher (p.<0.05) than control $(39.3\pm12.89\%)$ in repeat breeder Hanwoo. The parturition rates of normal Hanwoo were no differences among the treatments but were significant different in repeat breeder Hanwoo (p<0.05). When the estrous was induced by Ovsynch and inseminated once with rbST administration, the pregnancy rates of T2 was $12.5\%$ higher than control in normal Hanwoo, T4 $(80.0\%)$ was highest among the treatments (p<0.05) in repeat breeder Hanwoo. When normal Hanwoo were inseminated once with rbST administration, the pregnant period was $282.7\~284.8$ days and the body weight was $25.1\~25.9kg$, there were no difference among the treatments. The ratio of sex was almost same without T4 (male vs. female=18:9). In repeat breeder Hanwoo, pregnant period was 280.4~289.3 day and body weight was $23.0\~26.6kg$, it had no difference among the treatments. The sex ratio were similar to normal Hanwoo except T4 (M : F=2 : 8). In conclusion, the pregnancy and parturition rate by once insemination could be improved by the administration of rbST 250mg in normal Hanwoo or 500mg in repeat breeder Hawoo.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.317-333
• /
• 2014

The Pocheon iron (-copper) deposit, located at the northwestern part of the Precambrian Gyeonggi massif in South Korea, genetically remains controversial. Previous researchers advocated a metamorphosed (-exhalative) sedimentary origin for iron enrichment. In this study, we present strong evidences for skarnification and Fe mineralization, spatially associated with the Myeongseongsan granite. The Pocheon deposit is composed of diverse carbonate rocks such as dolostone and limestone which are partially overprinted by various hydrothermal skarns such as sodic-calcic, calcic and magnesian skarn. Iron (-copper) mineralization occurs mainly in the sodic-calcic skarn zone, locally superimposed by copper mineralization during retrograde stage of skarn. Age data determined on phlogopites from retrograde skarn stage by Ar-Ar and K-Ar methods range from $110.3{\pm}1.0Ma$ to $108.3{\pm}2.8Ma$, showing that skarn iron mineralization in the Pocheon is closely related to the shallow-depth Myeongseongsan granite (ca. 112 Ma). Carbon-oxygen isotopic depletions of carbonates in marbles, diverse skarns, and veins can be explained by decarbonation and interaction with an infiltrating hydrothermal fluids in open system ($XCO_2=0.1$). The results of sulfur isotope analyses indicate that both of sulfide (chalcopyrite-pyrite composite) and anhydrites in skarn have very high sulfur isotope values, suggesting the $^{34}S$ enrichment of the Pocheon sulfide and sulfate sulfur was derived from sulfate in the carbonate protolith. Shear zones with fractures in the Pocheon area channeled the saline, high $fO_2$ hydrothermal fluids, resulting in locally developed intense skarn alteration at temperature range of about $500^{\circ}$ to $400^{\circ}C$.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.207-214
• /
• 2005

To reduce phosphorus and nitrogen from the swine wastewater, magnesium chloride $(MgCl_2)$ was used as a reaction material for both soluble phosphorus (SP) and ammonia-nitrogen (AN). The initial value of SP content were $471mg/\ell$ far aeration test and $515 mg/\ell$ for NaOH addition test, but treatment of $MgCl_2$ reduced SP value to $5mg/\ell$ and $4mg/\ell$. The removal efficiency of $MgCl_2$ for SP showed $99\%$ in both treatment, and the removal efficiency of $MgCl_2$ for AN showed $15\%$ with treatment of aeration and $18\%$ with NaOH. All the experiments were done in a low temperature of 6 to $8^{\circ}C$, suggesting that this methods are possibly able to apply to a cold weather conditions. Moreover, the struvite crystal structure was identified by electronic microscope, implying that $MgCl_2$ is an effective material for removal of SP from swine wastewater In addition to the increased removal rate of the AN in wastewater, both $MgCl_2$ and $KH_2PO_4$ were added. The SP value was reduced by $99\%$ with 2g addition of the phosphate. The SP removal rate by 4g addition of the phosphate was increased only as $15-19\%$, but the quantity of removed SP was higher than that of 2g addition test. The value of AN was not reduced as expected by adding $KH_2PO_4$. The AN removal rate were low as $18\%$ and $15\%$ like as the level of the former test with $MgCl_2$ alone. Therefore, it is needed to examine closely the reaction mechanism f3r reducing both SP and AN simultaneously.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1049-1057
• /
• 2012

The study investigated the biochemical methane potential (BMP) assay of pig slurry supplemented with mixed methanogens and cellulolytic bacteria to improve anaerobic digestion for methane production. For the BMP assay, 7 different microbial supplementation groups consisted of the cultures of mixed methanogens (M), Fibrobacter succinogenes (FS), Ruminococcus flavefaciensn (RF), R. albus (RA), RA+FS, M+RA+FS, and control. The cultures were added in the batch reactors with the increasing dose levels of 1% (0.5 mL), 3% (1.5 mL) and 5% (2.5 mL). Incubation for the BMP assay was carried out for 60 days at $38^{\circ}C$ using anaerobic digestate obtained from an anaerobic digester with pig slurry as inoculum. In results, 5% RF and RA+FS increased total biogas up to 8.1 and 8.4%, respectively, compared with that of control (p<0.05). All 5% microbial culture supplements significantly increased methane production up to 12.1~17.9% compared with that of control (p<0.05). Total solid (TS) and volatile solid (VS) digestion efficiencies showed no relationship to the increased supplementation levels of microbial cultures. After incubation, pH values in all treatment groups ranged between 7.527 and 7.657 indicating that methanogensis was not inhibited during the incubation. In conclusion, the results indicated that both hydrolysis and methanogenesis stages for methane production in anaerobic batch reactors were influenced by the supplemented microorganisms due to the chemical characteristics of pig slurry, but only the 5% supplementation level of all microbial culture supplements used in the experiment affected methane production.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.