• Clinical and Experimental Pediatrics
• /
• 제49권3호
• /
• pp.268-272
• /
• 2006

목 적 : Helicobacter pylori 재감염률은 내시경적 생검만이 가능했던 시대에는 $^{13}C$-요소 호기 검사의 출현 이후에 비해 높게 보고되었다. 소아는 일반적으로 침습적인 내시경적 생검을 시행하기 용이치 않다. 본 연구는 $^{13}C$-요소 호기 검사와 내시경적 생검에 의한 재감염률을 비교하고, 그 차이에 영향을 미치는 인자를 찾고자 하였다. 방 법 : H. pylori 감염으로 치료받고 박멸이 확인된 소아들을 대상으로 하였다. 박멸 확인 후 18개월이 경과한 시점에 재감염을 확인하기 위하여 내시경적 생검(n=34명, 평균 연령 $11.5{\pm}3.7$세) 혹은 $^{13}C$-요소 호기 검사를(n=38명, 평균 연령 $10.0{\pm}3.6$세) 시행하였다. 첫 진단 시 내시경적 생검으로 위전정부 및 체부에서 세 절편을 채취하여 urease 검사, Giemsa 염색 및 Warthin-Starry 염색이 모두 양성으로 나오거나 생검 조직에서 H. pylori균이 배양된 경우 감염된 것으로 판정하였고, 박멸 치료 1-3개월 후 모든 검사상 음성인 경우 박멸된 것으로 판정하였다. $^{13}C$-요소 호기 검사는 최소 4시간 금식 후 75 mg의 $^{13}C$-요소를 주스에 섞어 마시도록 하는데, 복용 전 및 30분 후 Helikit(Isodiagnostika, Alberta, Canada)를 이용하여 숨을 불어넣도록 하고 delta $^{13}C$ per mil이 4.00 이상일 때를 양성으로 판독하였다. 결 과 : 내시경적 생검을 시행하였을 때 재감염률은 35.3%(12/34)였다. 내시경적 생검을 받은 모두가 당시 복부 증상이 있어 $^{13}C$-요소 호기 검사를 시행한 경우에 비해 복부 증상이 있는 경우가 유의하게 많았다(P=0.000). $^{13}C$-요소 호기 검사를 시행하였을 때 재감염률은 13.2%(5/38)였다. 추적 관찰 시 복부 증상이 있는 경우 재감염률이 유의하게 높았으며(P=0.008), 성별(P=0.694), 연령별(P=0.827). 궤양과 비궤양 간(P=0.730), 치료 방법 간에는(P=0.087) 재감염률에 차이를 보이지 않았다. 결 론 : 한국 소아에서 H. pylori 박멸 후 18개월이 경과하였을 때 비침습적인 $^{13}C$-요소 호기 검사를 이용한 재감염률은 13.2%이다. 내시경적 생검은 정확하나 침습적이어서 특히 무증상인 소아의 경우 이를 기피할 확률이 높아, 순응도에 따라 많은 영향을 받는다. 소아에서 재감염률 조사를 평가할 때에는 비침습적이면서 간편한 방법인가를 고려하여야 할 것이다.

• Parasites, Hosts and Diseases
• /
• 제44권1호
• /
• pp.27-33
• /
• 2006

Two species of Cryptosporidium are known to infect man; C. hominis which shows anthroponotic transmission between humans, and C. parvum which shows zoonotic transmission between animals or between animals and man. In this study, we focused on identifying genotypes of Cryptosporidium prevalent among inhabitants and domestic animals (cattle and goats), to elucidate transmittal routes in a known endemic area in Hwasun-gun, Jeollanam-do, Republic of Korea. The existence of Cryptosporidium oocysts was confirmed using a modified ZiehlNeelsen stain. Human infections were found in 7 $(25.9\%)$ of 27 people examined. Cattle cryptosporidiosis cases constituted 7 $(41.2\%)$ of 17 examined, and goat cases 3 $(42.9\%)$ of 7 examined. Species characterizations were performed on the small subunit of the rRNA gene using both PCR-RFLP and sequence analysis. Most of the human isolates were mixtures of C. hominis and C. parvum genotypes and similar PCR-RFLP patterns were observed in cattle and goat isolates. However, sequence analyses identified only C. hominis in all isolates examined. The natural infection of cattle and goats with C. hominis is a new and unique finding in the present study. It is suggested that human cryptosporidiosis in the studied area is caused by mixtures of C. hominis and C. parvum oocysts originating from both inhabitants and domestic animals.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.63-70
• /
• 1999

Some deep drawing characteristics to the elevated temperatures were investigated for the SCP1 steel sheets by using the Cr-coated die. For this investigations six steps of temperature ranges from room temperature to 25$0^{\circ}C$ and six kinds of drawing ratio from 2.4 to 2.9 were adopted. As a result the limiting drawing ration maximum drawing force and the maximum drawing depth were sensitively affected by the elevated temperatures and the more stable thickness strain distribution was observed to the elevated temperatures, Some experimental results were compared with analytical results using the DYNA-3D code.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.179-182
• /
• 2000

The dynamic softening behavior of type 430 ferritic stainless steel could be characterized by the hot torsion test in the temperature range of 900-110$0^{\circ}C$ and the strain rate range of 0.05-5/sec. It is found that the continuous dynamic recrystallization (CDRX) was a major dynamic softening mechanism. The effects of process variables strain ($\varepsilon$) stain rate($\varepsilon$)and temperature (T) on CDRX could be individually established from the analysis of flow stress curves and microstructure. The effect of CDRX individually established from the analysis of flow stress curves and microstructure. The effect of CDRX increased with increasing strain rate and decreasing temperature in continuous deformation. The multipass deformation processes were performed with 10 pass deformations. The CDRX effect occurred in multipass deformatioon. The grain refinement could be achieved from multipass deformation The grain refinement increased with increasing strain rate and decreasing temperature. Also the CDRX in multipass deformation was affected by interpass time and pass strain. The total strain was to be found key parameter to occur CDRX.

• Smart Structures and Systems
• /
• 제6권8호
• /
• pp.889-903
• /
• 2010

Idea of using piezoelectric materials with flexible structures made of rubber-like materials is quite novel. In this study a non-linear finite element model based on updated Lagrangian (UL) approach has been developed for dynamic response and its control of rubber-elastic material with surface-bonded PVDF patches/layers. A compressible stain energy density function has been used for the modeling of the rubber component. The results obtained are compared with available analytical solutions and other published results in some cases. Some results are reported as new results which will be useful for future references since the number of published results is not sufficient.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.778-779
• /
• 2006

Manufacturing technologies of micro parts were studied in nano grained Al-1.5mass%Mg alloy. During compressive test at $300^{\circ}C$, the Al alloy showed stain softening phenomenon by grain boundary sliding regardless of strain rate. Micro spur gear with ten teeth (height of $200{\mu}m$ and pitch of $250{\mu}m$) was fabricated with sound shape by micro forging. During micro forging, increase of applied stress induced by friction between material and die surface was effectively compensated by decrease of stress by strain softening behavior and as a result, flow stress increased only about 50 MPa more than that in compressive test

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.541-553
• /
• 2015

Structural Health Monitoring (SHM) systems can provide valuable information regarding the safety of structures during and after ground motions which can be used by authorities to reduce post-earthquake hazards. Strain gages as a key element play an important role in the success of SHM systems. Reducing the number of required strain gages while keeping the efficiency of SHM system not only can reduce the cost of structural health monitoring but also avoids storage and process of uninformative data. In this study, a method based on performance based seismic design of structures is proposed for ideal placement of stain gages in structures. The robustness and efficiency of the proposed method is demonstrated through installation of strain gages on an Airport Traffic Control (ATC) Tower. The obtained results show that the number of required strain gages decrease significantly.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.390-394
• /
• 1989

The stored elastic strain energy due to the thermal expansion mismatch between the thermally oxidized crystalline layer (cristobalite) and CVD Si3N4($\alpha$-Si3N4) on cooling form high oxidation temperature (1000-140$0^{\circ}C$) to room temperature, releases through the crazing of film and lifting at the SiO2/Si3N4 interface. The ratial equation (1/n) which corresponds to the ratio of the relaxation of the stored elastic stain energy due to crazing of film to the total energy, is derived under the assumption of the square crazed pattern, as follow. 1/n={8${\gamma}$(1-v)2}/(ΔL2dE) The ratial equation suggests the reason for the lifting at the SiO2/Si3N4 interface which was observed in this research.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.49-55
• /
• 2002

In this paper, the elevated temperature tensile properties and short-time creep rupture characteristics were investigated for the friction welded joints of dissimilar materials, Cu-1%Cr-0.5%Zr and STS316L. The joining tests on Cu-1%Cr-0.5%Zr/STS316L by friction welding were performed, and optimum joining conditions of the friction welded joints were determined. The characteristics of the elevated temperature tensile strength, hardness, fractographs were examined, and the creep rupture characteristics for the optimum welded joints were investigated under uniaxal static load at 300, 400 and $500^{\circ}C$.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.149-154
• /
• 2008

The present study described an antimicrobial spray composition comprising nanosized silica-silver particles, in which nano-silver is bound to silica molecules and a water-soluble polymer, the nanosized silica-silver particles prepared by irradiating a solution comprising a silver salt, silicate and the water-soluble polymer with radiation rays. According to a surfactant addition, the compositions were not turbid and were colorless. Also samples (cotton fabrics and wallpaper) were treated with the compositions also did not cause any stains even after drying under sunshine and at $80^{\circ}C$. Our results suggested that the spray formulation product was of practical use to control indoor fungi.