• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.171-179
• /
• 1997

This paper describes a nesting system of a computer-aided design of blanking and piercing for irregularly shaped sheet metal products. An approach to the system is based on knowledge-based rules. A nesting system is designed by considering several factors, such as utilization ratio which minimises the scrab for single or pairwise operation, bridge width, grain orientation and design requirements which maximise the strength of the part when subsequent bending is involve. Therefore this system which was implemented blank layout and strip layout module can carry out a nesting with a best utilization and a process planning for irregular shaped sheet metal products in single or pairwise operation and generate the blank layout and strip layout in graphic forms. Knowledges for a nesting and a process planning are extracted from plasticity theories, relevant references and empirical know-hows of experts in blanking industries. This provides its efficiency and effectiveness for nesting irregularly shaped sheet metal products.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.39-48
• /
• 1997

This paper describes the process planning system of a computer-aided design of blanking and piercing for irregularly shaped sheet metal products. An approach to the system is based on knowledge-based rules. The process planning system is designed by considering several factors, such as the complexity of blank geometry, production feasibility of products, and punch profile complexity. Therefore this system which was implemented production feasibility check and strip layout module can carry out a process planning considering a production feasibility area of both internal and external features, a dimension of blanked hole, a coner and a fillet radius for irregualrly shaped sheet metal products and generate the strip layout in graphic froms. Knowledges for process planning are extracted from plasticity theories, handbooks, relevant references and empirical know- hows of experts in blanking companies. This provides powerful capabilities for process planning system of irregularly shaped sheet metal products.

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.638-644
• /
• 2002

본 연구에서는 압축강도 1400 kgf/$\textrm{cm}^2$ 를 갖는 불포화 폴리에스터 폴리머 콘크리트를 이용하여 제작한 C형 시험체에 대한 편심압축 시험을 통하여 폴리머 콘크리트 휨부재의 응력-변형률 관계를 구명하고 등가직사각형 응력블럭의 파라미터 $\alpha$, $\beta$1, ${\gamma}$를 산출하였다. 아울러 인장철근비를 달리하는 5종의 전단스팬비 4.0인 철근 보강 폴리머 콘크리트 보에 대한 휨시험에서 얻어진 극한모멘트 시험값과 C형 시험체 응력-변형률 곡선에서 산출되는 파라미터 $\alpha$=0.61, $\beta$1=0.73 를 이용하여 계산된 이론적인 극한모멘트 값을 비교하여 보았던 바, 인장철근비가 0.50 $\rho$b 이상일때 시험값과 이론값이 비교적 잘 부합됨을 확인 할 수 있었다. 그러나 폴리머 콘크리트 휨 부재에 대한 보다 정확한 설계기준의 마련을 위해서는 압축강도와 크기를 변수로 하는 C형 시험체에 대한 보다 많은 시험을 통한 파라미터의 체계적인 연구가 필요하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.504-508
• /
• 2003

New banana-shaped achiral compounds, 4-chloro-1,3-phenylene bis [4-4(3-fluoro-9-alkenyloxy) phenyl-iminomethylbenzoate]s and 4-chloro-1,3-phenylene bis [4-4-(3-fluoro-10-alkanyloxy) phenyliminomethyl benzoate]s were synthesized by varying the substituent (X=H, F, or Cl); their electrooptical properties are described. The smectic phases, including a switchable chiral smectic C ($SmC^{\ast}$) phase, were characterized by differential scanning calorimetry, polarizing optical microscopy, and triangular method. The presence of vinyl end group at the terminals of linear side wings in the banana-shaped molecules induced a decrease in melting temperature. The smectic phase having the undecenyloxy group such $as-(CH_2)_9CH=CH_2$ showed ferroelectric switching, and its value of spontaneous polarization on reversal of an applied electric field was 2250 $nC/cm^2$, while the value of spontaneous polarization of the smectic phase having the decanyloxy group such as $-(CH2)_9CH_3$ was 3700 $nC/cm^2$. We could obtain the ferroelectric phase with low isotropic temperature by varying the end group at the terminals of linear side wings in the banana-shaped achiral molecules.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.636-644
• /
• 1997

The effect of various processing parameters, in particular the substrate and filament temperature, on the nucleation of diamond has been studied for the hot filament CVD process with a negative bias on the substrate. As far as the substrate temperature was maintained around the critical temperature of 73$0^{\circ}C$, the nucleation of diamond increased with increasing filament temperature. The maximum nucleation density of ~ 2$\times$109/$\textrm{cm}^2$ was obtained under the condition of filament temperature of 230$0^{\circ}C$, substrate temperature of 75$0^{\circ}C$, bias voltage of 300V, methane concentration of 20%, and deposition time of 2 hours. This nucleation density is about the same as those obtained in previous investigations. For fixed substrate temperatures, the nucleation density varies up to about 103 times depending on experimental conditions. This result is different from that of Reinke, et al. When the substrate temperature was above 80$0^{\circ}C$, a silkworm~shaped carbon phase was co-deposited with hemispherical microcrystalline diamond, and its amount increased with increasing substrate temperature. The Raman spectrum of the silkworm-shaped carbon was the same as that of graphitic soot. The silkworm-shaped carbon was etched and disappeared under the same as that of graphitic soot. The silkworm-shaped carbon was etched and disappeared under the deposition condition of diamond, implying that it did not affect the nucleation of diamond.

• Restorative Dentistry and Endodontics
• /
• 제44권2호
• /
• pp.18.1-18.9
• /
• 2019

Objective: This study evaluated the presence of residual root canal filling material after retreatment using micro-computed tomography (micro-CT). Materials and Methods: Extracted human teeth (single- and double-rooted, n = 21/each; C-shaped, n = 15) were prepared with ProFile and randomly assigned to three subgroups for obturation with gutta-percha and three different sealers (EndoSeal MTA, EndoSequence BC sealer, and AH Plus). After 10 days, the filling material was removed and the root canals were instrumented one size up from the previous master apical file size. The teeth were scanned using micro-CT before and after retreatment. The percentage of remaining filling material after retreatment was calculated at the coronal, middle, and apical thirds. Data were analyzed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni post hoc correction. Results: The tested sealers showed no significant differences in the percentage of remaining filling material in single- and double-rooted teeth, although EndoSeal MTA showed the highest value in C-shaped roots (p < 0.05). The percentage of remaining filling material of AH Plus and EndoSeal MTA was significantly higher in C-shaped roots than in single- or double-roots (p < 0.05), while that of BC sealer was similar across all root types. EndoSeal MTA showed the highest values at the apical thirds of single- and double-roots (p < 0.05); otherwise, no significant differences were observed among the coronal, middle, and apical thirds. Conclusions: Within the limitations of this study, a large amount of EndoSeal MTA remained after retreatment, especially in C-shaped root canals.

• 한국결정성장학회지
• /
• 제30권5호
• /
• pp.163-167
• /
• 2020

본 연구에서는 PVT(Physical Vapor Transport) 방법을 이용하여 반도체 식각 공정용 소재로 사용되는 링 모양의 SiC(Silicon carbide) 다결정을 제조하였다. 흑연 도가니 내부에 원기둥 모양의 흑연 구조물을 배치하여 PVT법에 의한 링 모양의 SiC 다결정을 성장시켰다. 성장된 결정은 Raman 및 UVF(Ultra Violet Fluorescence) 분석을 이용하여 결정의 상분석을 하였고, SEM(Scanning Electron Microscope), EDS(Energy Dispersive Spectroscopy) 분석을 통해 미세조직 및 성분을 확인하였다. PVT 성장 초기의 온도변화를 통하여 SiC 다결정의 결정립 크기와 성장 속도를 조절할 수 있었다.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.213-219
• /
• 2002

A cone-shaped active magnetic healing spindle system for high speed internal grinding with built-in motor that has 7.5kW power and maximum rotational speed of 50,000 rpm is designed and built. Using cone-shaped AMB(Active Magnetic Bearing) system, the axial rotor dick and magnets of conventional 5-axis actuating design can be eliminated. so this concept of design provides a simple magnetic bearing system. In this paper, the cone-shaped electromagnets are designed by magnetic circuit theory, and a de-coupled direct feedback PID controller is applied to control the coupled magnetic bearings. The designed crone-shaped AMB spindle system is built and constructed with a digital control system, which has TMS320C6702 DSP, 16 bit AD/DA, switching power amplifier and gap sensors. As the AMB system provides high damping ratio eliminating overshoot and resonance speed, this spindle runs up to 40,000 rpm stably with about 5${\mu}{\textrm}{m}$ of runout.

• 한국디지털건축인테리어학회논문집
• /
• 제13권4호
• /
• pp.77-86
• /
• 2013

Uigwe is official reports of the Joseon dynasty. They published from early Joseon but remain from 17C. We can search many hidden informations in them. Ga-Jungjagak (temporary T-shaped house) is one of them. It is unique architecture of the Joseon dynasty but it doesn't exist now at all. We can see many drawings describing Ga-Jungjagak (temporary T-shaped house) located next to Jungjagak in Uigwe. Jungjagak (T-shaped house) was built in royal tombs for sacrifice. Ga-Jungjagak was built in royal tombs for sacrifice as Jungjagak but existed temporarily. In this study, I want to find the process of norms Ga-Jungjagak in old records, official reports and annals of the Joseon Dynasty. Results are as follows: Ga-Jungjagak is the sacrifice space for queens in royal tombs. It is need to avoid sacrifice of delight and sorrow at the same time. They sacrifice to represent sorrow after the death of kings and queens for three years. After three year, they sacrifice to represent delight for kings and queens became ancestral gods. Ga-Jungjagak was destroyed three years later to combined sacrifices. The shape of Ga-Jungjagak is similar to Jungjagak in the same tomb. But dimensions of Ga-Jungjagak are equal or smaller than Jungjagak and decorations are abstemious.

• 한국패류학회지
• /
• 제27권3호
• /
• pp.167-173
• /
• 2011

말백합의 채란 채정 후 경과시간에 따른 수정률과 D형 유생의 발생률은 채란 채정 직후 수정한 것이 가장 높았으며, 1시간 이후부터는 수정률과 발생률이 급격히 감소하였다. 수정란의 적정 발생수온은 $25-27^{\circ}C$였으며, $33^{\circ}C$에서는 정상적으로 발생되지 않았다. 수정란에서 D형 유생까지 발생소요시간은 $20^{\circ}C$에서 37시간 15분, $25^{\circ}C$에서 20시간 50분, $30^{\circ}C$에서 15시간 20분이었다. 초기 발생에 있어 난 발생이 정지하는 생물학적영도는 평균 $12.4^{\circ}C$로 나타났다. 수정란이 D형 유생으로 발생 가능한 염분은 20.0-37.5 psu, 적정염분은 27.5-32.5 psu였다. 발생률이 높은 수정란의 수용밀도는 사육수 1 mL당 40개 이하였다.