• 한국수산과학회지
• /
• 제27권2호
• /
• pp.133-139
• /
• 1994

식품의 가공 저장 및 조리 중에 일어나는 식품성분간의 반응 중 대표적인 반응으로 알려져 있는 Maillard 반응생성물의 돌연변이원성에 대한 그 억제 기구를 밝히기 위하여 glucose-arginine계 및 glucose-lysine${\cdot}$HCl계 Maillard 반응 생성물에 일상 생활에서 많이 섭취하고 있는 해조류 및 야채류의 수용성 추출물을 첨가하여 그 억제효과를 조사하였고, 아울러 이들 수용성추출물의 가열($100^{\circ}C$, 10분)에 따른 억제효과의 영향에 대해 조사 검토하였다. 그 결과, 실험에 사용한 해조류 및 야채류 수용성 추출물 전부가 돌연변이원성 억제효과를 나타내었고, 특히 양배추, 파, 산초, 및 청각에 있어서 억제효과가 높게 나타났다. 가열한 경우, 야채류의 돌연변이원성 억제효과는 감소하였으나 해조류는 크게 영향을 받지 않았다. 이 결과로 미루어 보아 당-아미노산계 Maillard 반응생성물의 돌연변이원성 억제에 해조류 및 야채류 추출물에 존재하는 환원성 물질, 고분자 물질 catalase 및 peroxidase와 같은 효소 등이 일조를 하는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.125-126
• /
• 2006

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films. $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}cm^{-3}$. $345cm^2/V{\cdot}s$ at 293 K, respectively. From the photoluminescence measurement on $CdGa_2Se_4$ single crystal thin film, we observed free excition ($E_x$) existing only high quality crystal and neutral bound exiciton ($D^{\circ},X$) having very strong peak intensity. Then. the full-width-at -half-maximum(FWHM) and binding energy of neutral donor bound excition were 8 meV and 13.7 meV, respectivity. By Haynes rule. an activation energy of impurity was 137 meV.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.31-45
• /
• 2000

Because of the high unit cement content in the concrete mix, major concrete temperature rises are observed in the initial stages of hardening in structural members with large cross-sections made of high-strength concrete. While this temperature rise in the initial stages of hardening contributes to the initial development of the concrete strength, it also causes thermal cracking and obstructs medium to long-term increases of the concrete strength. In the study reports below, investigations were made on the effects of the concrete temperature rise in the initial stages of hardening on the medium to long-term development of the strength of structural concrete between the ages of 28 and 91 days. In the study, comparisons were made, for example, between the compressive strength of a control specimen subjected to standard curing at 28 days and the compressive strength of core specimens taken from structural members, and observations were made on the methods of evaluating the concrete strength in structure, defined here as the compressive strength of core specimens at 91 days. The results obtained indicate that, when the maximum temperature of the concrete is the structure does not exceed $60^{\circ}C$, the concrete strength in structure at the age of long-term will generally be greater than the compressive strength of the standard-curing specimens at 28 days, allowing one to evaluate the strength of the structural concrete in terms of the compressive strength of the 28-days standard-curing specimens. When, on the other hand, the maximum temperature of the concrete in the structure exceeds $60^{\circ}C$, the strength in concrete structure may be smaller than the compressive strength of the 28-days standard-curing specimens, creating risks in the evaluation of the concrete strength in structure by latter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.230-233
• /
• 2004

The stochiometric mix of evaporating materials for the $CuInS_2$ single crystal thin films was prepared from horizontal furnance. Using extrapolation method of X-ray diffraction patterns for the $CuInS_2$ polycrystal, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.524\;{\AA}$ and $11.142\;{\AA}$, respectively. To obtain the single crystal thin films, $CuInS_2$ mixed crystal was deposited on throughly etched semi-insulator GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperature were 640 t and 430 t, respectively and the thickness of the single crystal thin films was $2{\mu}m$. Hall effect on this sample was measured by the method of van dot Pauw and studied on carrier density and temperature dependence of mobility. The carrier density and mobility deduced from Hall data are $9.64{\times}10^{22}/m^3,\;2.95{\times}10^{-2}\;m^2/V{\cdot}s$ at 293 K, respectively The optical energy gaps were found to be 1.53 eV at room temperature. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the thin film, we have found that the values of spin orbit coupling splitting ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0211 eV and 0.0045 eV at 10 K, respectively. From PL peaks measured at 10K, 807.7nm (1.5350ev) mean Ex peak of the free exciton emission, also 810.3nm (1.5301eV) expresses $I_2$ peak of donor-bound exciton emission and 815.6nm (1.5201eV) emerges $I_1$ peak of acceptor-bound exciton emission. In addition, the peak observed at 862.0nm (1.4383eV) was analyzed to be PL peak due to donor-acceptor pair(DAP).

• 한국축산식품학회지
• /
• 제30권4호
• /
• pp.575-581
• /
• 2010

This investigation was aimed at developing a ready-to-reconstitute beverage by utilizing probiotics and whey protein hydrolysates carrying bioactive peptides. Cheddar cheese whey was ultrafiltered. The 18% protein retentate was subjected to protein hydrolysis using Neutrase. The hydrolyzed retentate was further condensed to 35% total solids and spray-dried at $75^{\circ}C$ outlet air temperature. Different levels of sugar, citric acid and stabilizer were blended for spray-dried hydrolysates. Spray-dried hydrolysate was further inoculated with different levels of probiotics grown in a whey medium and dried in fluidized-bed drier at $40^{\circ}C$ to obtain a ready-to-reconstitute beverage. Hydrolysis was greatest at an enzyme:substrate ratio of 1:25 for 3 h. Spray-dried hydrolysate reconstituted to 1% protein and blended with 15% sugar, 0.2% citric acid and 0.15% xantham gum resulted in a superior product with no sedimentation. Accordingly, sugar, citric acid and xanthum gum were dry-blended with spray-dried hydrolysates. Bifidobacterium bifidum and Lactobacillus acidophilus that was grown separately in a whey medium, blended to produce 2% spray-dried hydrolysate and dried as described above resulted in a readyto-reconstitute beverage mix. The fluidized dried product typically exhibited a probiotic count of $10^8$colony forming units (CFU)/g. However, blending of probiotic to the retentate and direct spray-drying precipitously reduced the probiotic count to $10^4$ CFU/g of powder.

• 한국전자파학회논문지
• /
• 제9권6호
• /
• pp.813-823
• /
• 1998

본 논문은 비분리형 비등방성 완전정합충(UAPML)을 이용하여 이동통신용 원형편파 등각 마이크로스트립 패치 안테나를 해석하였다 또한 3차원 U따까1L에 대한 모서리 및 모퉁이 부분에 대하여 특별히 다루었다. 특히 동축 여기선을 갖는 마이크로스트립 패치 안테나를 해석하기 위해서 Mur의 1차 흡수경계조건을 혼합 적용하였다 결과적으로 본 논문은 UAPML법이 모서리 및 모퉁이 부분에서 수렴함은 물론 Mur의 1차 흡수 경계조건과 혼합하여 홈수경계조건으로서 충분히 사용 가능함을 제시한다. 수치해석 결과는 이동통신 대역인 L밴드 및 C 밴드에서 중심주파수 1.575 GHz, 1.778 GHz 그리고 4.8 GHz를 갖는 단일 및 병렬 패치에 대한 전자장의 $E_z$및 $H\chi$에 대한 시간응답, 동축선의 입력임피던스 및 마이크로 스트립 패치의 복사특성을 해석 하였다 본 논문의 해석 결과는 2차 분산 경계조건(SDBC) Mur의 1차 흡수경계조건을 혼합한 수치해석 방법 그리고 순수 Mur의 1차 흡수경계조건과 비교하였다. 따라서 본 논문에서 제시된 해석방법이 합당함을 입 증할 수 있다.

• 한국버섯학회지
• /
• 제4권2호
• /
• pp.62-67
• /
• 2006

맛버섯균의 균사 배양을 위한 최적배지는 버섯완전배지(MCM), 최적균사 생장온도는 25 C, 최적pH는 5.0이었다. 균사생장이 가장 양호한 탄소원은 GLUCOSE, MANNOSE, 질소원은 YEAST EXTRACT, PEPTONE 및 ASPARAGINE, 등 이었다. 톱밥 병재배시($850m{\ell}$) 30일 배양후 숙성일수에 따른 초발이소요일, 자실체 생육일 수 및 수량을 검토한 결과 숙성하지 않은 배양 30일 처리시 초발이소요일 15~20일, 병당 수량 79g인 반면 숙성일수가 가장 긴 배양 70일 처리시 초발이 소요일 6~9일, 병당 수량 98g으로 숙성 일수가 길수록 초발이소요일이 빠르고, 수량이 증가하는 경향이었다. PP봉지 재배시 배 850g 배지에서 초발이소요일 17~21일, 갓의 수 39개, 수량 157g으로 배지 회수율이 가장 양호하였다.

• Archives of Plastic Surgery
• /
• 제41권5호
• /
• pp.466-471
• /
• 2014

Background Bleeding can be a problem in wound debridement. In search for an effective hemostatic agent, we experimented with a chitosan film combined with the recombinant human epidermal growth factor (rh-EGF), hypothesizing that it would achieve effective hemostasis and simultaneously enhance arterial healing. Methods Forty-eight Sprague-Dawley rats were used, and 96 puncture wounds were made. The wounds were divided into the following four groups: treated with sterile gauze, treated with gelatin sponge, treated with chitosan, and treated with chitosan combined with rh-EGF. Immediate hemostasis was evaluated, and arterial healing was observed histologically. Results Groups B, C, and D showed a significant rate of immediate hemostasis as compared to group A (P<0.05), but there were no significant differences among groups B, C, and D. Histologically, only group D showed good continuity of the vessel wall after 1 week. It was the only group to show smooth muscle cell nuclei of the vessel wall. Conclusions We observed that chitosan has an effective hemostatic potential and the mix of rh-EGF and chitosan does not interfere with chitosan's hemostatic capabilities. We also identified enhanced healing of vessel walls when rh-EGF was added to chitosan. Further research based on these positive findings is needed to evaluate the potential use of this combination on difficult wounds like chronic diabetic ulcerations.

• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.45-53
• /
• 2012

본 연구에서는 다양한 포장용 콘크리트 배합의 건조수축 특성에 관한 실험결과를 분석하였다. 실험변수는 굵은골재의 종류(석회암, 사암, 화강암, 안산암, 편마암)와 잔골재의 종류(자연사, 부순모래) 및 콘크리트의 배합강도(보통강도, 고강도)를 달리하였다. 그리고 형상비가 22.2, 40, 85.7, 150, 200, 300을 갖도록 시편의 크기를 달리하였으며 코팅제(U&V-H(A,B))를 활용하였다. 다이얼게이지를 이용하여 항온($20^{\circ}C$) 항습(60%)에서 수행된 건조수축 실험은 길게는 1,014일 동안 측정하였다. KS에서 제시하는 표준시편에 비해 도로포장 모사용 슬래브 시편의 건조수축 변형률은 약 39% 감소되는 것으로 나타났다. 또한 동일한 형상비에 대해 굵은골재의 변화에 따른 건조수축 실험결과 석회암이 배합된 시편의 변형률이 사암대비 형상비별로 56~76% 범위에서 가장 낮게 측정되어 포장용 콘크리트로 사용되는데 유리할 것으로 판단된다.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.61-72
• /
• 1991

This study was carried out to research the strength drop of concrete in dry environment. The mixing ratio of cement-fine aggregate was 1: 1, 1 : 2, 1: 3 and 1 : 4. The curing was compared standard curing with dry curing immediately after casting. It is analysis of strength change by water-proof mixing. The curing age of cement mortar was 3days, 7days, l4days and 28days. The result obtained from this study are summarized as follows. 1. The compressive and bending strength change by increasing the curing age, dry curing mortar the increasing rate of strength was decreased than standard curing mortar. 2. The compressive and bending strength change in early curing, strength difference between standard curing mortar and dry curing motar was gradually closed by increasing the W/C. 3. The dry curing mortar was decreased than standard curing mortar in decreasing rate of compressive and bending strength by increasing the W/C. 4. The compressive strength of water-proof mortar in early curing, liquid water-proof mortar was shown high strength in dry curing than standard curing. The powder and liquid water-proof mortar have a small effect in dry environment. The liquid water-proof mortar was high strength without relation change of curing age in dry environment than standard curing. 5. The compressive strength of liquid water-proof mortar in poverty mix, dry curing was shown high strength than standard curing. 6. The bending strength was increased than compressive strength by decreasing the volume of cement in early curing. The increasing rate of bending strength was decreased to compressive stength by increasing the curing age.