• 제목/요약/키워드: C-flux

검색결과 1,785건 처리시간 0.031초

Carbon Rich 분위기에서의 KHR45강의 침탄특성 평가 연구 (Carburization Characteristics of MERT Type KHR-45A Steel in Carbon Rich Environment)

  • 임재균;양기모;임영언
    • 한국재료학회지
    • /
    • 제23권5호
    • /
    • pp.293-298
    • /
    • 2013

  • In this study, an HP-mod. type(KHR-45A), which is used as a heater tube material in the pyrolysis process, was evaluated for its carburizing properties. It was confirmed from the microstructural observation of the tubes that the volume fraction of carbide increased and that the coarsening of Cr-carbide generated as a degree of carburization increased. The depth of the hardened layer, which is similar to the thickness of the carburized region of each specimen, due to carburization is confirmed by measurement of the micro-Vickers hardness of the cross section tube, which thickness is similar to that of the carburized region of each specimen. Two types of chromium carbides were identified from the EBSD (electron back-scattered diffraction) image and the EDS (energy-dispersive spectroscopy) analysis: Cr-rich $M_{23}C_6$ in the outer region and Cr-rich $M_7C_3$ in the inner region of tubes. The EDS analysis revealed a correlation between the ferromagnetic behavior of the tubes and the chromium depletion in the matrix. The chromium depletion in the austenite matrix is the main cause of the magnetization of the carburized tube. The method used currently for the measurement of the carburization of the tubes is confirmed; carburizing evaluation is useful for magnetic flux density measurement. The volume fraction of the carbide increased as the measuring point moved into the carburized side; this was determined from the calculation of the volume fraction in the cross-section image of the tubes. These results are similar to the trends of carburization measurement when those trends were evaluated by measurement of the magnetic flux density.

  • https://doi.org/10.3740/MRSK.2013.23.5.293 인용 PDF KSCI

중공사형 분리막에 대한 직접접촉식 막분리 공정의 수치해석 (A Numerical Analysis of Direct Contact Membrane Distillation for Hollow Fiber Membrane)

  • 신호철;정건용
    • 멤브레인
    • /
    • 제20권4호
    • /
    • pp.342-350
    • /
    • 2010

  • 막증류는 소수성이 강한 0.1 내지 $0.5{\mu}m$의 정밀여과막을 통하여 휘발도가 상대적으로 큰 성분을 증발시켜 분리하는 방법이다. 본 연구에서는 중공사형 분리막을 이용한 직접접촉식 막증류 공정을 "COMSOL Multiphysics" 프로그램을 이용하여 수치해석 하였으며 유체의 유입온도, lumen 및 shell side 공급 유속의 변화로 인한 투과량의 변화를 해석하였다. Lumen 공급용액의 온도가 30 에서 $50^{\circ}C$까지 증가할 경우 막증류 투과량은 1.0에서 $3.8L/m^2{\cdot}hr$ 까지 증가하였으나 shell 유체온도 영향은 상대적으로 낮았다. 또한 lumen 공급유속에 따른 막증류 투과량과 운전 압력손실을 고려할 경우 0.15 m/s ($Re_L=135$)일 때 가장 효율적임을 확인하였다.

  • PDF KSCI

Monitoring of Gamma-ray Bright Quasars 3C279 and 1510-089 at 22, 43 and 86GHz using KVN Single Dish Telescopes

  • 백준현;이상성;변도영;양지혜;한명희;손봉원
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.240.2-240.2
    • /
    • 2012

  • AGN(Active Galactic Nucleus) consists of a supermassive black hole located at its center, an accretion disk around the black hole, and bipolar jets. Since May 2011, we have performed the MOGABA(Monitoring Of GAmma-ray Bright AGN) project for observing gamma-ray bright AGN once a week at multifrequencies using KVN(Korean VLBI Network) 21m radio telescopes. The MOGABA project is the observations for measuring the degree of polarization, polarization angle, and total flux of about 20 AGN at 22, 43 and 86GHz. By this project, we are able to investigate polarization characteristics, spectral index, and variation of rotation measure at radio wavelengths of gamma-ray bright AGN and to study possible relation between gamma-ray flares and magnetic field structure change in AGN. According to previous research, gamma-ray flares of some AGN are coincident with large changes in angle of linear polarization. In this paper we report the preliminary results of linear polarization and total flux at 22, 43, 86GHz of gamma-ray bright quasars 3C279 and 1510-089 showing noticeable variation of total flux at 22GHz in late 2011, and discuss possible correlation with gamma ray light curves.

  • PDF

전열면의 특수표면화에 의한 열기기의 효율향상에 관하여 (Improved Heat Transfer Coefficient in Heat Exchanger by the Use of Specialized Heating Surface)

  • 임장순
    • 대한설비공학회지:설비저널
    • /
    • 제8권3호
    • /
    • pp.131-150
    • /
    • 1979

  • Recently only a few correlations between various factors due to the different grades of surface roughness for the nucleate pool boiling have been proposed. The main purpose of this work is to test the validity of these types of correlations between related factors to nucleate pool boiling phenomena. The boiling experiments using distilled water were carried out at the heat flux ranging from $7.4\times10^4\;to\;2.4\times10^5kcal/m^2h$ on the sintered porous metal surface with the cavity diameter of 10, n, 40, 70, $100{\mu}$, respectively, at the atmospheric pressure, To determine the bubble sizes, number of nucleation sites, delay and growth time, frequency of bubble emission and rising velocities of bubbles, the high speed motion picture technique was employed. In the correlation $f{\propto}D_b^n$, where f denotes frequency of bubble emission and $D_b$ departure diameter, n, the power factor of $D_b$, have been found to be from -2 to -10/3. The correlation C in the correlation between heat flux q and density of nucleation sites $\frac{N}{A}$, $q=C(\frac{N}{A})^n$, was appeared to be more crucial than the power factor n. The correlation of the heat flux q to the temperature difference ${\Delta}T$ and the density of nucleation sites$\frac{N}{A}$, was proposed to be $$q-460{\Delta}T^{\frac{5}{4}}=K{\Delta}T{\frac{5}{3}}(\frac{N}{A})^{\frac{2}{3}}$$. The values of heat transfer coefficient obtained in this experiments for the porous sintered metal surface appeared to be very high in comparison with the formerly obtained results for the other surfaces.

  • PDF