• 제목/요약/키워드: C-arm total running time

검색결과 2건 처리시간 0.047초

전자기식 체외충격파쇄석술시 하부요관 결석 환자에 대해 적합한 충격강도와 C-arm 총 가동시간 (The Optimal Shock Intensity and C-arm Total Running Time in Patients with Inferior Ureter Stones during Electromagnetic of ESWL)

  • 박정규;조의현
    • 한국방사선학회논문지
    • /
    • 제8권7호
    • /
    • pp.461-466
    • /
    • 2014
  • 체외 충격파 쇄석술시 쇄석기종에 따라 각각 장단점이 있으며, 전 처치로 인한 여러 가지 부작용이 보고되고 있다. 이에 전자기식 ESWL시 하부결석환자에서 적합한 충격파의 강도를 찾아보고, C-arm의 총 가동시간을 측정해 보았다. 본 연구는 2014년 1월부터 6월까지 경북지역 일개시의 C대학병원에서 전 처치를 시행하지 않고 ESWL을 받은 65명의 환자를 대상으로 하였다. 성비는 남자가 48명, 여자가 17명으로 남자가 더 많았으며, 연령은 50대가 가장 많았다. 하부요로결석의 발생은 왼쪽이 더 많았으며, 결석의 크기는 5mm 이하가 39명으로 가장 많았다. 적합한 충격강도는 1의 강도이며 통증을 호소하는 경우 C의 강도로 전환하여 충격을 가할 수 있다. 또한 C-arm의 총 가동시간은 $241.73{\pm}30.37$초로 나타났으며, 이것은 하부요로결석의 크기와 유의한 차이를 보였다(p<0.05). 따라서, ESWL시 전처치를 시행하지 않고 시술을 할 경우 요관 결석의 부위에 따라 적합한 충격강도와 충격빈도의 기준이 필요로 하며, C-arm 총 가동시간도 요관 결석의 발생부위에 따라 방사선으로 인한 피폭을 최소화하기 위한 총 가동시간에 대한 기준이 필요할 것으로 사료된다.

자동차 조립공정에서 공기압력식 진동공구의 국소진동평가 (Assessment of Vibration Produced by Pneumatic Hand Tools Used in Automobile Assembly)

  • 김선술;백남원
    • 한국산업보건학회지
    • /
    • 제6권1호
    • /
    • pp.1-16
    • /
    • 1996
  • This study was conducted at an automobile assembly line located in Kyonggi-do, Korea from January 16 to February 28, 1995. The purposes of this study were to assess worker exposures to hand-arm vibration and the performance of gloves for reduction of vibration. The exposure to vibration was measured using to the ISO 5349(1986) method. Vibration acceleration and frequency spectra for each tool were determined on-line replicating actual working conditions and analyzed together with exposure time for evaluating individual worker exposure. Eight pneumatic hand tools, 60 workers exposured to hand-arm vibration, and three pairs of gloves were involved in this study. Results are summarized as follows. 1. Dominant frequencies of vibration for all tools(n=8) measured in this study ranged from 250 Hz to 800 Hz. 2. There was no significant correleration between dominant frequencies and free running speed (p>0.05). 3. Total predicted exposure times of using impact, hammer type did not exceed 40 minutes, but metal finish task, using grinder and sander exceeded 40 minutes. Total exposure time affected significantly the frequency-weighted, 4 hr equivalent acceleration. 4. Predicted prevalence and observed exposure period data were compared in workers(n=60), according to ISO 5349. In this results, 23(50.0 %) and 24(48.07 %) persons exceeded the mean latency periods for vibration-induced white finger(VWF) at 10 % (n=46) and 50 % (n=52) standards, respectively. On the basis of ISO equation, mean latent periods for VWF were 3.23, 4.72 years at 10 %, 50 % standards, respectively. 5. Reduction of vibration by gloves was evaluated. Since impact pneumatic tools produced low frequency vibrations, conventional gloves did not provide any protection. Gloves A and C amplify somewhat the signal at frequency below 400 Hz; the attenuation increases progressively by frequency to reach 18 dB ($7.94{\times}10^{-6}m/s^2$) at 1,000 Hz, slightly worsening Glove B did not provide any protection and made the situation slightly worse. However, since they make the hands warm, the occurrence of vibration-induced white fingers may be reduced.

  • PDF