• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.617-637
• /
• 1996

Occupational dermatosis is one of the most prevalent occupational disorders. However, the extent of the occupational dermatoses including incidences and prevalencies of each disease entity, and etiologic materials are not yet welt stated in Korea. Authors reviewed the literatures on the statistic data and reports on the occupational dermatoses, and surveyed on the occupational dermatoses in two factories, and surveyed the physicians responsible to the occupational dermatoses with formed questionnaire. The results are as follows; 1. Among medical journals published since 1964, there were 31 articles on the occupational dermatoses. Of 31 articles, 18 were case reports and all others were review articles. Of 18 case reports, 9 were epidemiologic survey. The Workers' Periodic Health Examinations revealed that prevalence of the occupational dermatoses was highest(4.36 per 10,000 workers) in 1974, but number of the cases reported were decreased sharply since 1978 with some tendency to increase since 1981. There were 2,240 reported cases of occupational dermatoses between 1966 and 1992, which is 1.90% of all the reported occupational diseases. Skin infection and injuries due to chemicals were most frequent and there were 6 cases of skin cancer. 2. In an epidemiological survey on the dermatoses among 995 workers in a metal product manufacturing factory and 225 workers in a coal chemical factory, there were 794 with dermatomycosis, 296 workers with acne, 130 workers with scar, 123 workers with deformity of toe nails. Scars, photosensitivity dermatitis, deformity of finger and toe nails, and acne were more prevalent in the metal product manufacturing factory(p<0.05). In the metal prouct manufacturing factory, workers treating organic solvents and oils had more dermatoses than those without treating the materials(p<0.05). On the skin patch performed on 16 workers in the metal product manufacturing factory, there were 8 cases of irritation dermatitis and 5 cases of contact dermatitis. Prevalence of contact dermatitis in the metal product manufacturing factory was 1.3%. 3. On the questionnaire survey, 34 dermatologists, 29 doctors of preventive medicine, and 22 family physician replied. The proportion of occupational etiology among all dermatoses assumed by the physicians were below 9%, and the most important occupational dermatosis in Korea was contact dermatitis. Main etiologic materials related to the occupational dermatosis were organic solvent, acid and alkali, and metals. The reason for the scarcity of report of occupational dermatoses were difficulty in diagnosis and physician's ignorance of the occupational etiology. They replied that to prevent the occupational dermatoses in the workplace, the use of protective devices was most important, and development of diagnostic criteria on the occupational dermatoses is urgent. Above results shows us that there is many workers with occupational dermatoses, but they are mostly unreported. Measures to prevent and manage the occupational dermatoses are not satisfactory at present. Hence, authors suggest measures for the precise diagnosis, report and prevention of the occupational dermatoses. a. Dermatologist, preventive physician, and industrial hygienist should work as a team to examine the high risk group and establish the preventive measures. b. Disease entities, diagnostic criteria of occupational dermatoses should be listed, criteria for the compensation and job fitting at recruitment should be established, and manual for the proper treatment and effective prevention of each occupational dermatosis should be developed. c. Patch test antigens against each occupational category should be developed and it should be available to any physicians responsible. d. To facilitate the diagnosis of occupational dermatoses by the doctors responsible for the Workersr Periodic Health Examination, development of standardized questionnaire, education on the techniques of the patch test, and cooperation with the dermatologist in diagnosis of occupational dermatoses is essential.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.168-178
• /
• 1994

Acid sulfate soils occur extensively in Gimhae area where they have been formed from the brackish alluvial sediments along the sea coast and river estuary. The strong acid environment enhances silicate weathering and thus affects the soil clay minerals. The minerals were identified through chemical, X-ray diffraction and thermal methods. The ratio of $SiO_2$ and $Al_2O_3$ in the clay fractions ranged from 3.14 to 3.77, indicating that the distribution of the clay minerals were 1 : 1 and 2 : 1 minerals. Cation exchange capacity in the clay fractions was low due to high contents of 1 : 1 minerals and hydroxy interlayered vermiculite(HIV). The B and C horizon rich in jarosite have large amounts of yellow streaks which reflect high content of $Fe_2O_3$ and $K_2O$. Vermiculite and illite were quantified from thermogravimetry(TG), kaolin minerals from both TG and differential thermal analysis(DTA), and HIV from X-ray diffraction analysis. The dominant clay minerals were kaolin minerals, vermiculite, illite and HIV. HIV considered to be formed, especially, in acid soil environments. The minor minerals were quarts, feldspar, jarosite, pyrite, hematite and goethite. Kaolin minerals were the most abundant clay minerals throughout the acid sulfate soil. Kaolin minerals, however, increased towards the top of horizons throughout the soils and HIV decreased towards the top of horizons in the soil of Gimhae series and Haecheog series. Alteration of HIV to kaolin minerals during weathering of low pH condition in deep soil horizons may explain the high quantities of kaolin minerals and the relatively low quantities of HIV in the soil at top horizons.

• Journal of Chest Surgery
• /
• v.37 no.6
• /
• pp.492-498
• /
• 2004

Background: In this study, we investigated the risk factors for the development or progression of aortic regurgitation(AR) in patients with type I ventricular septal defect (VSD) to determine the optimal surgical timing and strategy. Material and Method: Three-hundred and ten patients with type I VSD with or without AR were included. The mean of age was 73.7$\pm$114.7 (1-737) months. One hundred and eighty six patients (60%) had no AR, 83 (27%) had mild AR, 25 (8%) had moderate AR and 16 (5%) had severe AR. Aortic valve was repaired in 5 patients and replaced in 11 patients with closure of VSD in the first operation. Four patients required redo aortic valve repair and 11 patients required redo aortic valve replacement. Age at operation, association with aortic valve prolapse, Qp/Qs, systolic pulmonary arterial pressure, VSD size and systolic pulmonary artery to aortic pressure ratio(s[PAP/AP］) were included as risk factors analysis for the development of AR. The long-term result of aortic valve repair and aortic valve replacement were compared. Result: Older age at operation, association with aortic valve prolapse, high Qp/Qs, and s[PAP/AP] were identified as risk factors for the development of AR (p<0.05, Table 2). The older the patient at the time of operation, the higher the severity of preoperative AR and the incidence of postoperative AR (p<0.05, Table 1, Fig. 1). For the older patients at operation, aortic valve repair had higher occurrence of AR compared to those who had aortic valve replacement (p<0.05, Fig. 2). Conclusion: From the result of this study, we can concluded that early primary repair is recommended to decrease the progression of AR. Aortic valve repair is not always a satisfactory option to correct the aortic valve pathology, which may suggest that aortic valve replacement should be considered when indicated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.145-156
• /
• 1996

The effects of priming with different polyethylene glycol (PEG 6, 000) solutions on the germination, emergence characteristics and early plant growth in rice, barley and wheat were investigated. Rice, barley and wheat seeds were subjected to various priming conditions of osmotic potentials (-0. 75, -1.00 and -1.50 MPa) of PEG, and incubation period were 5 days at 25, 20, 2$0^{\circ}C$, respectively. The percentage of water absorption was highest in barely, and lowest in rice, and all the treatments enhanced water absorption in barley, but showed no significant effects in rice and wheat. Respiration quotient was lower than none PEG treatment seeds, and those of barley and wheat were higher than rice regardless of PEG concentration, and that of rice increased with high PEG concentration. Total germination percentage of osmoconditioning seeds with PEG was higher than that of none treatment seed, and those of barley and wheat were significant. The artificially deteriorated seeds with PEG treatment seeds after ageing treatment could recover to nearly the same germination level as that of the control seeds. The effects of coating polymer were higher than osmoconditioning with PEG, and germination characteristics in rice showed varietal difference at PVP and waterlock at recoated seeds after PEG treatment. Osmoconditioning with PEG reduced mean germination and emergence time, but there was no difference among PEG concentrations. The plant height of PEG treaed seed in rice was taller and those of barely and wheat showed varietal difference, and those of polymer-coated seed after PEG treatment were different among the polymers. The dry weight of PEG treatment were different among the crops, and those were increased with the high PEG concentration. The emergence percentage of PEG-treated seed were higher than none-treated seed, and those were decreased with the increased PEG concentration, and the highest emergence percentage of rice, barley and wheat were 90, 50 and 50% soil moisture content, respectively. The time to emergence in rice was longer than barley and wheat, and those in rice was shortened in high soil moisture content, and barley and wheat were shortened in low soil moisture content.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.480-491
• /
• 2015

In this study, methods using LDC (Load Duration Curve) and watershed model were suggested to develope management targets and evaluate target achievement for non-point source pollution management considering watershed and runoff characteristics and possibility for achievement of target. These methods were applied for Saemangeum watershed which was designated as nonpoint source pollution management area recently. Flow duration interval of 5 to 40% was selected as flow range for management considering runoff characteristics and TP was selected as indicator for management. Management targets were developed based on scenarios for non-point source pollutant reduction of management priority areas using LDC method and HSPF model which was calibrated using 4 years data (2009~2012). In the scenario of LID, road sweeping and 50% reduction in CSOs and untreated sewage at Jeonju A20 and 30% reduction in fertilizer and 50% in livestock NPS at Mankyung C03, Dongjin A14 and KobuA14, management targets for Mangyung bridge, Dongjin bridge, Jeonju stream and Gunpo bridge were developed as TP 0.38, 0.18, 0.64 and 0.16 mg/L respectively. When TP loads at the target stations were assumed to have been reduced by a certain percentage (10%), management targets for those target stations were developed as TP 0.35, 0.17, 0.60 and 0.15 mg/L respectively. The result of this study is expected to be used as reference material for management master plan, implementation plan and implementation assessment for non-point source management area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.229-241
• /
• 2006

Global air temperature has risen by $0.6^{\circ}C$ over the last one hundred years due to increased atmospheric greenhouse gases. Moreover, this global warming trend is projected to continue in the future. This study was carried out to evaluate spatial variations in rice production areas by simulating rice-growth and development with projected high resolution climate data in Korea far 2011-2100, which was geospatially interpolated from the 25 km gridded data based on the IPCC SRES A2 emission scenario. Satellite remote sensing data were used to pinpoint the rice-growing areas, and corresponding climate data were aggregated to represent the official 'crop reporting county'. For the simulation experiment, we used a CERES-Rice model modified by introducing two equations to calculate the leaf appearance rate based on the effective temperature and existing leaf number and the final number of leaves based on day-length in the photoperiod sensitive phase of rice. We tested the performance of this model using data-sets obtained from transplanting dates and nitrogen fertilization rates experiments over three years (2002 to 2004). The simulation results showed a good performance of this model in heading date prediction [$R^2$=0.9586 for early (Odaebyeo), $R^2$=0.9681 for medium (Hwasungbyeo), and $R^2$=0.9477 for late (Dongjinbyeo) maturity cultivars]. A modified version of CERES-Rice was used to simulate the growth and development of three Japonica varieties, representing early, medium, and late maturity classes, to project crop status for climatological normal years between 2011 and 2100. In order to compare the temporal changes, three sets of data representing 3 climatological years (2011-2040, 2041-2070, and 2071-2100) were successively used to run the model. Simulated growth and yield data of the three Japonica cultivars under the observed climate for 1971-2000 was set as a reference. Compared with the current normal, heading date was accelerated by 7 days for 2011-2040 and 20 days for 2071-2100. Physiological maturity was accelerated by 15 days for 2011-2040 and 30 days for 2071-2100. Rice yield was in general reduced by 6-25%, 3-26%, and 3-25% per 10a in early, medium, and late maturity classes, respectively. However, mid to late maturing varieties showed an increased yield in northern Gyeonggi Province and in most of Kwangwon Province in 2071-2100.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.205-212
• /
• 1999

The present study was designed to examine the effects of selenium(Se), vitamin E(Vit. E) and recombinant Bovine Somatotropin(rBST) administration on the selenium and vitamin E concentrations of blood in Hanwoo sires Hanwoo sires were randomly assigned to five groups; 1. control, 2. rBST, 0.09mg/kg body weight (BW) 3. Vit E, 1,500IU/kg BW, 4. Se 0.lmg/kg BW, 5. Vit E, 1.500IU plus Se 0.1mg/kg BW. rBST, Vit. E and Se for each experimental group were given 6 times at 15 days interval by intramuscular injection. Blood samples were collected 10 times for experimental periods, separated the serum by centrifugation, and stored at －7$0^{\circ}C$. Se and Vito E concentrations in blood were measured by fluorophotometer and HPLC. Se concentrations of blood in control, rBST, Vito E, Se and Se plus Vito E groups were 64.55, 65.50, 68.15, 73.11 and 74.09 ppb/$m\ell$, respectively. Se concentration in Vit. E plus Se group was significantly higher than in control and rBST groups (P＜0.05), but Vito E group was not significantly different in control and rBST groups(P＞0.05). The Vit. E concentrations of blood in control, rBST, Vit. E, Se and Se plus Vit. E groups were 2.27, 2.32, 2.80, 2.58 and 2.75 ppm/$m\ell$, respectively. Vit. E and Vit. E plus Se groups were slightly higher than those of any other groups, but not significantly difference in 외 I experimental groups(P＜0.05). These results indicate that Se and Vit. E concentrations of blood were slightly increased with the injection of Se and Vit. E in Hanwoo sires.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.9-14
• /
• 2007

Data of 369 commercial pigs produced from YorkshrexLancrace (YL F1) sows crossed with either Duroc (D), Berkshire (B) or BerkshirexDuroc(BD F1) as a terminal sire were used for the comparison of carcass garde and real retail cut yield. The crosses were performed between May, 2004 and May, 2006 at three interrlated farms belonging to the Gyeongam pork brand. The average carcass weight, carcass backfat thickness, carcass rate, AB grade ratio, lean meat yield were 84.78±0.33kg, 20.72±0.237mm, 76.25±0.208%, 85.7% and 44.30±0.158%, respectively. The average weights of real retail cut were 10.32±0.062kg belly, 4.17±0.025kg boston butt, 3.88±0.022kg rib, 8.40±0.040kg picnic, 15.15±0.081kg ham, 6.44±0.043kg loin and 0.94±0.006kg tender loin. In comparisons of carcass traits among cross types, carcass weights and backfat thicknesses of YL(♀)×B(♂), YL(♀)×BD(♂) and YL(♀)×D(♂) were 85.73±0.516kg, 82.69±0.788kg and 84.79±0.603kg, respectively and 22.09±0.356mm, 20.33±0.543mm and 19.58±0.415mm, respectively. The YL(♀)×B(♂) cross showed the highest carcass weight and backfat thickness. The ratio of AB grade were 0.83±0.030% in YL(♀)×B(♂), 0.97±0.046% in YL(♀)×BD(♂) and 0.83±0.035% in YL(♀)×D(♂), and the YL(♀)×BD(♂) was higher than other two crosses. Weights of belly were 10.28±0.092kg in YL(♀)×B(♂), 10.59±0.133kg in YL(♀)×BD(♂) and 10.25±0.107kg in YL(♀)×D(♂). Consequently, the YL(♀)×BD(♂) cross showed the highest yield. In conclusion, there was no difference in carcass yield of commercial pigs derived from BD (F1) terminal sires with those from D terminal sires. However, weight of belly and AB grade ratio from BD (F1) terminal sires are higher than two others. Therefore, BD (F1) sire could be utilized as terminal one and contribute better profit for the pig industry.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.7-16
• /
• 2009

Appenzeller cheese samples were prepared by addition of 0.5, 1.0, and 2.0% green tea (Camellia sinensis, CS) powder and control cheese. We examined various quality characteristics of the novel cheese, such as viable-cell counts, pH, water-soluble nitrogen (WSN), non-casein nitrogen (NCN), non-protein nitrogen (NPN), and catechin level during maturation for 16 weeks at $14^{\circ}C$. To develop a Korean natural cheese containing green tea powder, we also analyzed the changes in the polyacrylamide gel electrophoresis pattern, chemical composition, and sensory qualities. The viable cell counts of the samples were not significantly different. Until the $3^{rd}$ week, the pH of the CS cheese decreased with an increase in the maturation time. However, the pH gradually increased by the $12^{th}$ week, while WSN, NCN, NPN also increased. The WSN, NCN, NPN, and catechin values for the CS cheese samples were significantly higher than the values for the control cheese. The polyacrylamide gel electrophoretic pattern of caseins for the CS cheese indicated that this cheese degraded more rapidly than the control cheese did. In the sensory evaluation, cheese with 1.0% CS powder showed the highest scores in taste and appearance and good scores in flavor and texture. These results indicate that 1.0% CS is the optimal value for addition to cheese, and cheese containing 1.0% CS shows good physiological properties and reasonably high overall sensory acceptability.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.191-198
• /
• 2008

To design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. $CO_2$ capture process from the major point sources such as power plants, transport process from the capture sites to storage sites and storage process to inject $CO_2$ into the deep marine geological structure can be simulate with numerical modeling. The purpose of this paper is to compare and analyse the relevant equations of state including ideal, BWRS, PR, PRBM and SRK equation of state. We also studied the effect of thermodynamic equation of state in designing the compression and transport process. As a results of comparison of numerical calculations, all relevant equation of state excluding ideal equation of state showed similar compression behavior in pure $CO_2$. On the other hand, calculation results of BWRS, PR and PRBM showed totally different behavior in compression and transport process of captured $CO_2$ mixture from the oxy-fuel combustion coal-fired plants. It is recommended to use PR or PRBM in designing of compression and transport process of $CO_2$ mixture containing NO, Ar and $O_2$.