• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.8-13
• /
• 2004

This research aimed at scrutinizing the comparative dyeability of some disperse dyes at low temperature on ultra-microfiber polyester, islands in the sea type (0.05 denier), which has claimed utmost fastness and improved uptake of dyeing. Comparisons of dyeability, such as rate of dyeing and color depth, on ultra-microfiber polyester were evaluated by H.T. exhaust dyeing method and followed by the test of rubbing fastness. To achieve high wet fastness, some commercial disperse dyes, Terasil WW and Megacron dyes, which have been recently launched for excellent wash fastness, have been examined compared with conventional disperse dyes, C.I Disperse Red 167 and C.I Disperse Orange 30.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.54-61
• /
• 1994

Acrylamidomethylated cellulose(AMC) was prepared by a reaction of N-methy-lolacrylamide(NMA) in the presence of acid catalyst, and pendent C=C double bonds are created on cellulose. Using the pendant double bonds as a site for Michael addition, a number of modified cellulose could be readily prepared. When AMC is treated in an aqueous solution containing sodium dihydrogen phospate and methylamine, the chemical structure of cellulose is represented as follow ; Cell-O-$CH_{2}$-NHCO-$CH_{2}$-$CH_{2}$-NHMe. Therefore in this paper, dyeing properties of modified cellulose for the acid dye were investigated.

• Textile Coloration and Finishing
• /
• v.13 no.4
• /
• pp.249-255
• /
• 2001

To interpret the dyeing behavior of PTT fiber with C. I. Disperse Violet 1, the thermodynamic Parameters of dyeing, such as standard affinity, heat of dyeing(enthalpy change), entropy change, diffusion coefficient, and activation energy of diffusion, were obtained from isotherms and dyeing rates at various temperatures and compared with those of PET fiber. The heat of dyeing(enthalpy change) and the entropy change of PTT fiber showed smaller negative values than those of PET fiber. This means that the dye molecules in the PTT fiber are combined more loosely than in the PET fiber and that is due to the flexibility of polymer chains of PTT fiber. The diffusion coefficients of C. I. Disperse Violet 1 into the PTT fiber were larger than those for PET fiber, and the activation energy of diffusion on PTT fiber was smaller than that on PET fiber.

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.301-307
• /
• 2000

Silk fabrics were dyed with Gromwell extracts after mordanted with various mordants and their dyeability, antibacterial.deodorization activity, fastness and change of surface color were investigated. Silk fabrics were mordanted at $60^\circ{C}$ for 30 minutes and subsequently dyed at $40^\circ{C}$ for 30 minutes. The dye-uptake of silk fabrics increased with the concentration of Gromwell extracts and mordants. Surface color of silk fabrics changed differently according to the type of mordants used. Antibacterial and deodorization activities of silk fabrics dyed with Gromwell extracts were good. Cu mordant was more effective for deodorization activity. Dyed silk fabrics showed poor light fastness but good dry-cleaning and perspiration fastness.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.1-7
• /
• 1990

The crystallinity and dyeability of PET filament were studied when the conditions of drawing and heat-setting were varied. The crystaltinity of PET filament was increased as the drawing ratio and heatsetting temperature were increased. The dye uptake and dyeing rate of PET filament were decreased as the drawing ratio was increased. With increasing the heat-setting temperature, however, the dye uptake and dyeing rate were decreased at an early stage, showing the minimum at $160^{\circ}C-180^{\circ}C$ and then increased above that temperature. The thermal shrinkage of PET filament was decreased as the drawing ratio was increased, while increasing as the heat-setting temperature was increased.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.120-130
• /
• 2011

This study is a fundamental research on the natural Polygoum tinctoria dyeing to quantify scientifically and satisfy the reproducibility of the procedure. By dyeing the silk fabrics, the establishment of accurate dyeing method was sought. At the same time, we tried to modify the traditional dyeing methods, broaden the methods, and apply the dyeing variously. The dyeability and color changes were compared and reviewed according to the changes in the reducing temperature, reducing time, concentration of the reducing agent, dyeing temperature, dyeing time, concentration of NaOH, and the number of repetition of dyeing. The optimum conditions in the dyeing procedure are as follows: Added concentration of the reducing agent is 3g/${\ell}$. Reducing temperature is $60^{\circ}C$. Reducing time is 40minutes. Dyeing temperature is $30^{\circ}C$. Added concentration of NaOH is 1g/${\ell}$. Dyeing time is 30minutes.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.