• Journal of Forest and Environmental Science
• /
• v.40 no.1
• /
• pp.9-14
• /
• 2024

Quantitative evaluation of nutrient status and stoichiometry on the forest floor is a good indicator of litter quality in various vegetation types. This study was conducted to determine the effects of vegetation type on the nutrient concentration and stoichiometry of forest floors at a regional scale. Forest floor samples were collected from four vegetation types of evergreen coniferous forests including Cryptomeria japonica, Chamaecyparis obtusa, evergreen broadleaf, and bamboo spp. forests in southern Korea. The dry weight of the forest floor was higher in the C. japonica and C. obtusa forests than in the evergreen broadleaf and bamboo forests. The mean carbon (C) concentrations of the forest floor were highest in the broadleaf forest, followed by the bamboo forest, C. japonica and C. obtusa forests. Mean nitrogen (N) and phosphorous (P) concentrations in the the coniferous forests were lower than those in the broadleaf and bamboo forests. The mean C:N ratio was the highest in C. obtusa forest (118±25), followed by C. japonica (66±6), evergreen broadleaf (41±1), and bamboo (30±1) forests. However, C:P and N:P ratios were lower in the coniferous forests than in the broadleaf forest indicating that the stoichiometry of the forest floor varies across vegetation types. The C, N, and P stocks on the forest floor were higher in the C. obtusa forest than in the broadleaf or bamboo forests. These results highlight that vegetation type-dependent stoichiometric ratio is an useful indicator for understanding interspecific difference in quality and quantity of the forest floor.

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.288-291
• /
• 1999

Fatigue crack propagaion rates and characteristics of the SA516-70 steel which is used for the low temperature pressure vessels, were studied in the room temperature of 1$0^{\circ}C$ and low temperature ranges of -1$0^{\circ}C$, -3$0^{\circ}C$, -5$0^{\circ}C$, -7$0^{\circ}C$ with stress ratio of R＝0.05.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.48-53
• /
• 2006

The purpose of this paper is to investigate the optimal condition of the SynGas production by reforming of propane using plasmatron. Plasma was generated by air and arc discharge. The effects of applied steam, $CO_2$ or Ni-catalyst on propane conversion, yield of hydrogen and $H_2/CO$ ratio as well as correlation of syngas were studied. When the variations of $O_2/C_3H_8$ flow ratio, $H_2O/C_3H_8$ flow ratio and $CO_2/C_3H_8$ flow ratio were $0.94{\sim}1.48,\;4.3{\sim}10\;and\;0.8{\sim}3.05$ respectively, Under the condition mentioned above, result of $H_2O/C_3H_8$ flow ratio was maximum $H_2$ concentration, or $28.2{\sim}31.6%$, and result of $H_2O/C_3H_8$ flow ratio with catalyst was minimum CO concentration or $6.6{\sim}7.1%$ and the ratio of hydrogen to carbon monoxide($H_2/CO$) were $3.89{\sim}4.86$.

• Korean Journal of Community Nutrition
• /
• v.9 no.3
• /
• pp.263-273
• /
• 2004

The purpose of this study was to investigate the pattern of individual fatty acid intake and to compare serum lipid levels and total serum fatty acid composition of high school students in Seoul (total : 234 ; male : 91 ; female : 143) In serum lipid levels, total cholesterol (Chol.), HDL-Chol. and LDL-Chol. levels of female students were significantly higher than those of male students and there was no significant difference between High Fish ＆ Low Meat intake (HFLM) and Low Fish ＆ High Meat intake (LFHM) groups. The average fat intake was 22-25 energy % of total subjects and especially, that of LFHM group was 29%, which were over the recommendation level. Although the average P/M/S ratio of dietary fat was 1.1/1.2/1.0, the average range of $\omega6/\omega3$ fatty acid ratio of dietary fat was found to be 17.9-20.7, which was far beyond the suggested range, 4-10. The average intake of cholesterol of total subjects was 360mg. LFHM group had more meats and beverages such as carbonated drinks and tended to have less beans, vegetables and mushrooms. In addition, LFHM group had more energy and fat intake than those of HFLM group, the P/S ratio of dietary fat (0.73) was lower than the recommended ratio. Serum C16 : 0 composition of LFHM group was significantly higher than that of HFLM group, and EPA and DHA composition of HFLM was significantly lower than that of LFHM. Therefore, in HFLM group, the P/S ratio of serum fatty acids was significantly higher and the $\omega6/\omega3$ ratio was lower. Dietary C18 : 0 was negatively correlated with serum EPA and DHA composition. Individual PUFA intake was negatively correlated with serum C16 : 0 and sum of SFA, and positively correlated with serum C18 : $2\omega6(LA)\;,\;sum\;o;\omega6$ and sum of PUFA. Serum C18 : 1, C18 : $3\omega3\; and\; C20\;:\;4\omega6$ (AA) compositions were not correlated with dietary fatty acid. Only serum triglyceride (TG) levels were significantly correlated with serum fatty acid compositions. Sum of SFA, C14 : 0, C16 : 0, sum of MUFA and C18 : 1 compositions were positively correlated with serum TG levels, but LA, AA, sum of PUFA and P/S ratio were negatively correlated with it.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.131-137
• /
• 2007

In this study, the biodegradation test on lignocellulose under sulfate reducing conditions was carried out. In particular, the interaction between cellulose and lignin was investigated with various g-cellulose/g-lignin (C/L) ratios: 42.15, 4.59, 2.51, 1.14 and 0.7. It was shown that the rate of cellulose degradation decreased in proportion to the lignin content. Assuming first order degradation kinetics, the consequences of competitive inhibition were graphically shown for different C/L ratios. The relation between cellulose reduction rate and C/L ratio was expressed by logarithm function with a determination coefficient of 0.97. Lignocellulose reduction rate was also described as a logarithm function of C/L ratio showing a inhibition effect by lignin. In the mean time, the rate of lignin decomposition was higher at C/L ratio of 2.51 and 1.14 compared with C/L ratios of 4.59 and 0.7, indicating that excessive extra carbon source is not appropriate for lignin biodegradation.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.445-452
• /
• 2000

The copolymerization of ethylene (E) and norbornene (N) was examined by using various metallocene catalysts and modified-MAO(MMAO) cocatalyst. For $C_2$-symmetry catalysts such as rac-Et(Ind)$_2$ZrC $l_2$, M $e_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si(Cp)$_2$ZrC $l_2$ and Cs-symmetrical iPr(FluCp)ZrC $l_2$ as well as CGC and di-bridged zirconocene, the effects of catalyst structure and [N]/[E] feed ratio on catalyst activity, thermal property and [N] content of copolymer (COC) was investigated. For rac-Et(Ind)$_2$ZrC $l_2$ catalyst of a constant [N]/[E] feed ratio, the appropriate conditions of [Al]/[Zr] mole ratio, polymerization temperature and cocatalyst structure were found to be 3000, 4$0^{\circ}C$, MMAO cocatalyst, respectively. As [N]/[E] feed ratio increased, the incorporation of norbornene to copolymer increased while, the activity of catalyst decreased except for iPr(FluCp)ZrC $l_2$ With consideration of catalyst activity as well as N content, it was found that rac-Et(Ind)$_2$ZrC $l_2$/MMAO system exhibited relatively high activity and controllable $T_{g}$. Monomer reactivity ratio was determined by Kelen-Tudos method..

• Geomechanics and Engineering
• /
• v.37 no.4
• /
• pp.371-382
• /
• 2024

Measurement or prediction of compression index (C_c) of soils is essential for assessment of total and differential settlement of structures. It is a well-known fact that this parameter is controlled by several index identifiers of soil including initial void ratio, Atterberg limits, overconsolidation ratio, specific gravity, etc. Many studies in the past proposed relationships for prediction of C_c based on different index properties. Therefore, this study aims to present a comparison of previously proposed equations for estimation of C_c. Data from literature was compiled, and a total of 90 and 623 test results on remolded and undisturbed specimens were used to question the validity of previously proposed equations. Nevertheless, the modeling ability of 7 and 12 equations for estimation of C_c of remolded and undisturbed soils were questioned by use of compiled data. Moreover, new empirical relationships based on initial void ratio and toughness limit for prediction of C_c was proposed by use of nonlinear multivariable regression and evolutionary based regression analyses. The results are promising-the performances of models established are quite acceptable, which are verified by statistical analyses.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.499-506
• /
• 2005

This study was performed to investigate the effects of influent C/N ratio on the removal of organic and nitrogenous compounds by two nonwoven fabric filter bioreactors. The reactors were alternately aerated at an aeration/nonaeration period ratio of 60 min/60 min, and fed with wastewater only during nonaeration period. The influent C/N ratio (COD/TKN) was gradually reduced from 10 to 2. The influent was prepared by diluting the leachate from a foodwaste treatment facility in I city so that the COD concentration could be about 2,500 mg/L. The C/N ratio of the wastewater was adjusted by adding ammonium chloride. The results of the experiment showed that the COD and BOD concentration of the effluent was $40{\sim}54\;mg/L$ and $1{\sim}4\;mg/L$, respectively at the C/N ratios of $10{\sim}3$, and the effluent SS concentration was always below 2.0 mg/L. The T-N removal efficiencies were 96% or higher at C/N ratios of $10{\sim}5$, but decreased to 83% and 81%, respectively at the C/N ratios of 3 and 2.8. At the C/N ratios of 2.6 and 2, the effluent quality deteriorated due to ammonia toxicity. The fraction of nitrifying microorganism in the reactors increased from 10% to 20% as the C/N ratio decreased from 5 to 2.6. Alkalinity consumed were $3.12{\sim}3.49\;g$ alkalinity/g T-N removed at the C/N ratios of $10{\sim}5$, which are lower than the theoretical value of 3.57. However, the ratio increased to 4.63 and 4.87 g alkalinity/g T-N removed, respectively at the C/N ratios of 3 and 2.8.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.685-696
• /
• 1995

The most important techniques in the synthesis of SiC/C function gradient material (FGM) are to control the SiC/C ratio and to obtain the moderate deposition rate. For these, various gas systems and flow rates were attempted and evaluated. It turned out that the CH4＋SiCl4＋H2 system was suitable for the deposition of SiC-rich layers, the C3H8＋SiCl4＋Ar system for the deposition of carbon-rich layers, and the C3H8＋SiCl4＋H2＋Ar system was good to deposit the layers between them.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1055-1063
• /
• 1990

The early hydration characteristics of the system $C_3S-C_3A-C_4AF$ according to the clinker composition variations, in order to establish the mutual interactionof clinker minerals during the portland cement hydration, have been studied. The early hydration rate of $C_3S$ was greatly effected by the change of $C_3S/C_3A$ ratio. The lower the $C_3S/C_3A$ ratio was, the faster the apex reaching time and the rate of heat liberation of the 2nd exothermic peak originating from the formation of $Ca(OH)_2$ were. The effect of $C_3S/C_3A$ ration on the amounts of $Ca(OH)_2$ formation was decreased, in process of hydration time, but the effect of $C_3S$ content was increased.