• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1343-1352
• /
• 1997

Background : Heat-treated cells are known to be protected from lysis by TNF, which is considered to play a central role in the pathogenesis of sepsis-induced acute lung injury. The objective of the study was to investigate the effect of heat shock response by heat-pretreatment on the acute lung injury of the rats induced by intratracheally administered TNF-$\alpha$, Methods : We intratracheally instilled either saline or TNF (R&D, 500ng) with and without heat pretreatment in Sprague-Dawley rats weighing 250~350 g. The heated rats were raised their rectal temperature to $41^{\circ}C$ and was maintained thereafter for 13 minutes at 18 h before intratracheal administration of saline or TNF. After 5 h of intratracheal treatment, lung leak, lung myeloperoxidase activity (MPO) and heat shock proteins were measured in rats. Lung leak index was defined as counts per minute of $I^{25}$ in the right lung divided by counts per minutes of $I^{25}$ in 1.0 ml of blood. All data are expressed as means ${\pm}$SE. Results : There is no difference in acute lung leak index ($0.099{\pm}0.024$ vs $0.123{\pm}0.005$) among the rats given saline intratracheally with and without heat pretreatment, but MPO activity showed a decreased tendency in heat-pretreated rats ($4.58{\pm}0.79\;U/g$) compared with heat-unpretreated rats ($7.32{\pm}0.97\;U/g$) (P=0.064). Rats administered TNF intratracheally with heat-pretreatment had decreased lung leak index ($0.137{\pm}0.012$) and lung MPO activity ($5.51{\pm}1.04\;U/g$) compared with those of heat-unpretreated and TNF-administered rats ($0.186{\pm}0.016$, $14.34{\pm}1.22\;U/g$) (P<0.05 in each). There were no significant difference of lung leak index and MPO activity between TNF-treated rats with heat-pretreatment and saline-treated rats with and without heat-pretreatment. Conclusion : The heat shock response attenuated neutrophil recruitment and acute lung leak induced by intratracheal instillation of TNF-in rats.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.109-114
• /
• 1993

This study was carried out to determine the optimum planting time for in vitromultiplied tuber of Pinellia ternata(Thunb.) Breit. The tubers were planted on April 20, May 20, June 20, July 20, August 20 and September 20 in 1990. Emergence ratios were 68 to 87% in any planting time except planting on July 20. The number of tubers per $m^2$ at harvest in plantings on May 20 and June 20 were significantly higher with 1,110 and 1,021, respectively, while in plantings after July 20, those were drastically decreased. As compared with fresh yield of planting on April 20(352kg /10a), that of May 20 was 109% and June 20 was 103%, while those of after July 20 were from 41% to 19%. There was a highly positive correlation between dry tuber yield and the number of tubers per $m^2(r=0.991^{**})$. Tuber yields for commercial use(diameter over 7.1mm) were high in planting on May 20(322kg /10a) and on June 20(299kg /10a). It was suggested that optimum field planting time for in vitro multiplied tuber of Pinellia ternata(Thunb.) Breit was from May 20 to June May 20.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.227-234
• /
• 2019

An analytical method was developed for the determination of oxytetracycline in agricultural products using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method by liquid chromatography-tandem mass spectrometry (LC-MS/MS). After the samples were extracted with methanol, the extracts were adjusted to pH 4 by formic acid and sodium chloride was added to remove water. Dispersive solid phase extraction (d-SPE) cleanup was carried out using $MgSO_4$ (anhydrous magnesium sulfate), PSA (primary secondary amine), $C_{18}$ (octadecyl) and GCB (graphitized carbon black). The analytes were quantified and confirmed with LC-MS/MS using ESI (electrospray ionization) in positive ion MRM (multiple reaction monitoring) mode. The matrix-matched calibration curves were constructed using six levels ($0.001{\sim}0.25{\mu}g/mL$) and coefficient of determination ($r^2$) was above 0.99. Recovery results at three concentrations (LOQ, $10{\times}LOQ$, and $50{\times}LOQ$, n=5) were from 80.0 to 108.2% with relative standard deviations (RSDs) less than of 11.4%. For inter-laboratory validation, the average recovery was in the range of 83.5~103.2% and the coefficient of variation (CV) was below 14.1%. All results satisfied the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for oxytetracycline determination in agricultural commodities. This study could be useful for safety management of oxytetracycline residues in agricultural products.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.344-352
• /
• 2012

Soil physical properties determine soil quality in aspect of root growth, infiltration, water and nutrient holding capacity. Although the monitoring of soil physical properties is important for sustainable agricultural production, there were few studies. This study was conducted to investigate the condition of soil physical properties of arable land according to land use across the country. The work was investigated on plastic film house soils, upland soils, orchard soils, and paddy soils from 2008 to 2011, including depth of topsoil, bulk density, hardness, soil texture, and organic matter. The average physical properties were following; In plastic film house soils, the depth of topsoil was 16.2 cm. For the topsoils, hardness was 9.0 mm, bulk density was 1.09 Mg $m^{-3}$, and organic matter content was 29.0 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.32 Mg $m^{-3}$, and organic matter content was 29.5 g $kg^{-1}$; In upland soils, depth of topsoil was 13.3 cm. For the topsoils, hardness was 11.3 mm, bulk density was 1.33 Mg $m^{-3}$, and organic matter content was 20.6 g $kg^{-1}$. For the subsoils, hardness was 18.8 mm, bulk density was 1.52 Mg $m^{-3}$, and organic matter content was 13.0 g $kg^{-1}$. Classified by the types of crop, soil physical properties were high value in a group of deep-rooted vegetables and a group of short-rooted vegetables soil, but low value in a group of leafy vegetables soil; In orchard soils, the depth of topsoil was 15.4 cm. For the topsoils, hardness was 16.1 mm, bulk density was 1.25 Mg $m^{-3}$, and organic matter content was 28.5 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.41 Mg $m^{-3}$, and organic matter content was 15.9 g $kg^{-1}$; In paddy soils, the depth of topsoil was 17.5 cm. For the topsoils, hardness was 15.3 mm, bulk density was 1.22 Mg $m^{-3}$, and organic matter content was 23.5 g $kg^{-1}$. For the subsoils, hardness was 20.3 mm, bulk density was 1.47 Mg $m^{-3}$, and organic matter content was 17.5 g $kg^{-1}$. The average of bulk density was plastic film house soils < paddy soils < orchard soils < upland soils in order, according to land use. The bulk density value of topsoils is mainly distributed in 1.0~1.25 Mg $m^{-3}$. The bulk density value of subsoils is mostly distributed in more than 1.50, 1.35~1.50, and 1.0~1.50 Mg $m^{-3}$ for upland and paddy soils, orchard soils, and plastic film house soils, respectively. Classified by soil textural family, there was lower bulk density in clayey soil, and higher bulk density in fine silty and sandy soil. Soil physical properties and distribution of topography were different classified by the types of land use and growing crops. Therefore, we need to consider the types of land use and crop for appropriate soil management.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.147-155
• /
• 1977

In this experiment, we expected yield increase depending on the control of ineffective tiller, heightening of effective tillering ratio and continuous supply of nitrogen until later growth stage of rice plant by deep layer split application. Treats were applied at Tongil and Jinheung variety, clayey loam and sandy loam soil, and drained and non-drained condition. Nitrogenous fertilizer application wab adopted as liquefied(50%) and lumped (50% and 80%) fertilizer at 12cm depth of soil before 35 days of rice heading time against the standard soil surface application. The results are summarized as follaw. 1. a. Jinheung showed great variant width of tiller numbers per rice plant growth stage, and low effective tillering ratio at soil surface dressing. But in the case of deep layer split application, the number of tiller increased normally, and effective tillering ratio was high. b. At Tonsil, the width of increase and decrease range of effective tiller number between soil surface dressing and deep layer split application was not so high as Jinheung. Deep layer split application of 80% lumped fertilizer showed maximum effective tillering ratio ($83%{\sim}93%$). C. In the case of Jinheung, it was supposed that deep layer split application of 80% lumped fertilizer was excessive nitrogen quantity. d. Effective tillering ratio was higher than Tonsil at Jinheung. 2. The number of grains per hill was increased by the deep layer split application, but the ripening ratio was decreased inversely with the increase of total grain number. 3. Length of top leaves was elongated at Jinheung by deep layer split application. It showed significant correlation between top leaves length and grain yield. 4. Deep layer split application inclosed N content of harvested straw. Yield and N content of straw showed possitive correlation. 5. The ratio of unhulled grain yield per straw weight was increased by deep layer splication. This ratio was higher at Jinheung than Tonsil. 6. Grain yield was appeared in order of 80% lumped fertilizer>50% lumped fertilizer>50% liquefied fertilizer>surface dressing by the deep layer split application. The yield increasing factors were the increasing of effective tillering ratio, number of panicles per hill and number of ripening grains per hill. 7. Grain yield was increased at Tongil in sandy loam soil and at Jinheung in clayey loam soil by deep layer split application. 8. The grain yield was increased at drained conditions of clayey loam soil and non-drained conditions of sandy loam soil. But in the case of 80% lumped fertilizer of deep layer split application at the sandy loam soil, the yield was not increased at non-drained conditions. 9. The effect of yield increase by deep layer split application comparing with the surface dressing was higher at Tonsil than ginheung, in spite of low ripening ratio of Tonsil caused by low temperature at heading and harvesting time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.148-156
• /
• 2008

Statement of problems: Self-etch adhesives exhibit some clinical benefits such as ease of manipulation and reduced technique-sensitivity. Nevertheless, some concern remains regarding the bonding effectiveness of self-etch adhesives to enamel, in particular when so-called 'mild' self-etch adhesives are employed. This study compared the microtensile bond strengths to ground enamel of the two-step self-etch adhesive Clearfil SE Bond (Kuraray) to the three-step etch-and- rinse adhesive Scotchbond Multi-Purpose (3M ESPE) and the one-step self-etch adhesive iBond (Heraeus Kulzer). Purpose: The purpose of this study was to determine the effect of a preceding phosphoric acid conditioning step on the bonding effectiveness of a two-step self-etch adhesive to ground enamel. Material and methods: The two-step self-etch adhesive Clearfil SE Bond non-etch group, Clearfil SE Bond etch group with prior 35% phosphoric acid etching, and the one-step self-etch adhesive iBond group were used as experimental groups. The three-step etch-and-rinse adhesive Scotchbond Multi-Purpose was used as a control group. The facial surfaces of bovine incisors were divided in four equal parts cruciformly, and randomly distributed into each group. The facial surface of each incisor was ground with 800-grit silicon carbide paper. Each adhesive group was applied according to the manufacturer's instructions to ground enamel, after which the surface was built up using Light-Core (Bisco). After storage in distilled water at $37^{\circ}C$ for 1 week, the restored teeth were sectioned into enamel beams approximately 0.8*0.8mm in cross section using a low speed precision diamond saw (TOPMET Metsaw-LS). After storage in distilled water at $37^{\circ}C$ for 1 month, 3 months, microtensile bond strength evaluations were performed using microspecimens. The microtensile bond strength (MPa) was derived by dividing the imposed force (N) at time of fracture by the bond area ($mm^2$). The mode of failure at the interface was determined with a microscope (Microscope-B nocular, Nikon). The data of microtensile bond strength were statistically analyzed using a one-way ANOVA, followed by Least Significant Difference Post Hoc Test at a significance level of 5%. Results: The mean microtensile bond strength after 1 month of storage showed no statistically significant difference between all adhesive groups (P>0.05). After 3 months of storage, adhesion to ground enamel of iBond was not significantly different from Clearfil SE Bond etch (P>>0.05), while Clearfil SE Bond non-etch and Scotchbond Multi-Purpose demonstrated significantly lower bond strengths (P<0.05), with no significant differences between the two adhesives. Conclusion: In this study the microtensile bond strength to ground enamel of two-step self-etch adhesive Clearfil SE Bond was not significantly different from three-step etch-and-rinse adhesive Scotchbond Multi-Purpose, and prior etching with 35% phosphoric acid significantly increased the bonding effectiveness of Clearfil SE Bond to enamel at 3 months.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.124-134
• /
• 2019

An analytical method was developed for the determination of broflanilide and its metabolites in agricultural products. Sample preparation was conducted using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method and LC-MS/MS (liquid chromatograph-tandem mass spectrometer). The analytes were extracted with acetonitrile and cleaned up using d-SPE (dispersive solid phase extraction) sorbents such as anhydrous magnesium sulfate, primary secondary amine (PSA) and octadecyl ($C_{18}$). The limit of detection (LOD) and quantification (LOQ) were 0.004 and 0.01 mg/kg, respectively. The recovery results for broflanilide, DM-8007 and S(PFP-OH)-8007 ranged between 90.7 to 113.7%, 88.2 to 109.7% and 79.8 to 97.8% at different concentration levels (LOQ, 10LOQ, 50LOQ) with relative standard deviation (RSD) less than 8.8%. The inter-laboratory study recovery results for broflanilide and DM-8007 and S (PFP-OH)-8007 ranged between 86.3 to 109.1%, 87.8 to 109.7% and 78.8 to 102.1%, and RSD values were also below 21%. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the Food and Drug Safety Evaluation guidelines (2016). Therefore, the proposed analytical method was accurate, effective and sensitive for broflanilide determination in agricultural commodities.

• Clinical and Experimental Reproductive Medicine
• /
• v.33 no.1
• /
• pp.45-52
• /
• 2006

Objective: Our purpose was to investigate the relationship between the levels of IL-6 and tumor necrosis factor-${\alpha}$ in the peritoneal fluid of women with and without endometriosis and infertile women. Methods: This study is prospective and case-control study in University hospital, enrolled thirty-four women with laparoscopic findings of minimal to severe endometriosis, and thirty-seven women with no visual evidence of pelvic endometriosis and with benign gynecologic disease. IL-6 and tumor necrosis factor-${\alpha}$ levels in peritoneal fluid were determined using commercial ELISA. IL-6 and tumor necrosis factor-${\alpha}$ concentrations were compared among women with and without endometriosis, and with infertile and fertile women, and then also compared according the revised American Fertility Society classification. Results: IL-6 and tumor necrosis factor-${\alpha}$ concentrations were higher than in the peritoneal fluid of women with endometriosis than in matched normal controls. Cyclic variations in IL-6 concentrations were seen in peritoneal fluid from patients with endometriosis: the concentrations in the secretory phase were significantly higher than those in the proliferative phase. The concentrations were higher than among of infertile women than in fertile women. A significant correlation between IL-6 and tumor necrosis factor-${\alpha}$ concentrations and endometriosis stage III and IV was noted. Conclusion: Increased levels of IL-6 and tumor necrosis factor-${\alpha}$ in patients with endometriosis in the peritoneal fluid may be relate to the pathogenesis of endometriosis suggesting that partially contribute to the disturbed immune regulation observed in patients with endometriosis.

• Lingua Humanitatis
• /
• v.7
• /
• pp.271-289
• /
• 2005

Dans cet article, nous discutons de certains $probl{\grave{e}}mes$ syntaxiques en ayant recours $\grave{a}$ la $th{\acute{e}}orie$ linguistique de Milner. Nous remettons en question $l'ind{\acute{e}}pendance$ et $l'identit{\acute{e}}$ de la structure syntaxique, la relation entre le plan syntaxique et le plan lexical, le $caract{\grave{e}}re$ de la $g{\acute{e}}om{\acute{e}}trie$ de la syntaxe, etc.. La discussion est non seulement linguistique mais aussi interdisciplinaire et ${\acute{e}}pist{\acute{e}}mologique$, dans la mesure $o{\grave{u}}$ nous examinons la nature de $l'entit{\acute{e}}$ syntaxique et la $m{\acute{e}}thode$ "scientifique" de la syntaxe qui donne $acc{\grave{e}}s$ $\grave{a}$ $l'entit{\acute{e}}$ syntaxique. Selon Milner, il faut distinguer la place du terme lexical avec la position syntaxique qui est $l'entit{\acute{e}}$ syntaxique. La $premi{\grave{e}}re$ n'est pas syntaxique $\grave{a}$ strictement parler, mais elle, observable contrairement $\grave{a}$ la seconde, sert $\grave{a}$ conjecturer la dimension syntaxique, $c'est-\grave{a}-dire$ le $syst{\grave{e}}me$ positionnel. Le dispositif $th{\acute{e}}orique$ dans la $th{\acute{e}}orie$ linguistique de Milner n'est rien d'autre que l'ensemble des propositions qui permet, en absence d'observatoire, de conjecturer le $syst{\grave{e}}me$ positionnel sur la base du $syst{\grave{e}}me$ des places. Dire $l'ind{\acute{e}}pendance$ de la structure syntaxique revient $\grave{a}$ dire qu'il y a une coupure entre le $syst{\grave{e}}me$ positionnel et le $syst{\grave{e}}me$ des places. Autrement dit, sans cette coupure, on ne peut parler de $l'ind{\acute{e}}pendance$ de la structure syntaxique. Ainsi $distingu{\acute{e}}s$, les deux $syst{\grave{e}}mes$ en cause se mettent en relation soit naturels soit non naturels ou par distorsion $d'apr{\grave{e}}s$ Milner. La relation naturelle est une relation lexico-syntaxique $n{\acute{e}}e$ au moment $o{\grave{u}}$ un terme lexical occupe une position syntaxique dont la $cat{\acute{e}}gorie$ est identique $\grave{a}$ celle de son occupant. A la $diff{\acute{e}}rence$ de cette relation d'occupation naturelle $suppos{\acute{e}}e$ chez Milner comme une tendance du langage naturel, la relation d'occupation non naturelle est "paradoxale" dans le sens $o{\grave{u}}$ elle est produite dans la rencontre plus ou moins "anomale" entre l'occupant lexical et $l'occup{\acute{e}}$ syntaxique. Le $degr{\acute{e}}$ de l'anomalie qu'une langue autorise peut ${\hat{e}}tre$ $mesur{\acute{e}}$ empiriquement et doit ${\hat{e}}tre$ $vari{\acute{e}}$ en fonction de la langue $concern{\acute{e}}e$. Le $caract{\grave{e}re$ $g{\acute{e}}om{\acute{e}}trique$ de la syntaxe $am{\grave{e}}ne$ ${\grave{a}}$ remettre en cause, entre autres, $l'empiricit{\acute{e}}$ et la $mat{\acute{e}}rialit{\acute{e}}$ de la $g{\acute{e}}om{\acute{e}}trie$ syntaxique. En ce qui concerne ces sujets, nos $th{\grave{e}}ses$ sont les suivantes : la nature de la $g{\acute{e}}om{\acute{e}}trie$ syntaxique n'est pas a priori mais empirique ; la $g{\acute{e}}om{\acute{e}}trie$ de la syntaxe peut et doit ${\hat{e}}tre$ construite $\grave{a}$ l'aide de la logique "empirique".