• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.347-357
• /
• 2018

The applicability of room temperature ionic liquids (RTILs), 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([$C_nmim$] [$Tf_2N$]), was investigated for the extraction of Am(III) and Eu(III) from nitric acid using n-octyl(phenyl)-N,N-diisobutyl carbamoylmethyl phosphine oxide (CMPO) and tri-n-butylphosphate (TBP) as extractants. The distribution ratios of Am(III) and Eu(III) in CMPO-TBP/[$C_nmim$][$Tf_2N$] were measured as a function of various parameters such as the concentrations of nitric acid, CMPO, and TBP. The results were compared with those obtained in CMPO-TBP/n-dodecane (n-DD). With comparable concentrations of the extractants, the distribution ratios obtained with RTILs were much higher than those obtained with n-DD. It was observed that the extraction efficiency was less for Eu(III) than for Am(III). The extraction of Am(III) and Eu(III) decreased with increases in the feed acidity for all three RTILs. The results suggest that the extraction of Am(III) and Eu(III) by CMPO in RTILs from nitric acid proceeds through the cation-exchange mechanism. The distribution ratios of Am(III) and Eu(III) increased with increases in the concentration of CMPO for all three RTILs. A linear regression analysis of the extraction data resulted in a straight line with a slope of about 3, suggesting the involvement of 3 molecules of CMPO during the extraction process.

• The Korean Journal of Ecology
• /
• v.16 no.3
• /
• pp.261-273
• /
• 1993

The nitrogen assimilation rate of nitrogenous nutrients by reservior phytoplankton was masured in the in situ condition in the euphotic layer of Lakes Soyang, Chuncheon and Uiam located on the upper reaches of the North Han River System in August, 1983, Korea. The assimilation rate of ammonia, nitrate and urea nitrogen in surface water was 13, 2 and $13{\mu}g$ at. $N{\cdot}m^{-3}{\cdot}(12:10~18:15)^{-1}$ in Lake Soyang, 325, 27 and $59{\mu}g$ at. $N{\cdot}m^{-3}{\cdot}(12:30~18:30)^{-1}$ in Lake Chuncheon, and 174, 12 and $45{\mu}g$ at. $N{\cdot}m^{-3}{\cdot}(12:30~19:30)^{-1}$ in Lake Uiam. Ammonia and urea were perferntially utilized by reservoir phytoplankton. The dark/light ratios of nitrate assimilation were much lower than those of ammonia and urea assimilation of nitrate showed little contribution. The primary productuin was estimated as 59mg $C{\cdot}m^{-2}{\cdot}day^{-1}$ and 6.9mg $N{\cdot}m^{-2}{\cdot}day^{-1}$ in Lake Spyang, 217mg C{\cdot}m^{-2}{\cdot}day^{-1}$ and 26mg N{\cdot}m^{-2}{\cdot}day^{-1}$ in Lake Chuncheon, and 110mg C{\cdot}m^{-2}{\cdot}day^{-1}$ and 13mg N{\cdot}m^{-2}{\cdot}day^{-1}$ in Lake Uiam, with production ratios of 8.6, 8.4 and 8,4, respectively. The turnover time o ammonia and urea in the upper euphotic layer was 2 to 47 days and 4 to 38 days, respectively. Nitrate required much longer periods. In the euphotic layer of reservoirs, ammonia and urea played signigicant roles in the biogeoKDICical nitrogen metabolism.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.64-72
• /
• 2011

This study was performed to assess the removal efficiency on nitrogen, phosphorus and organic carbon in wastewater by spatial separation and internal recycling in a modified oxidation ditch process (modified OD). The performances of the modified OD were evaluated via laboratory-scale experiments. The process was operated at hydraulic retention times of 6-48 hours and solid retention times of 17-38 days. We found that organic carbon removal efficiency increased after the modified OD operation period. T-N removal efficiency remained stable; average T-N concentration of effluent was 8.02 mg/l after modified OD operation. In contrast, T-P concentration of effluent was over 1 mg/l. Nitrogen and phosphorus removal efficiency of modified OD at HRT 12 hr were 83.1% and 74.1%, respectively. Also, maximum efficiency was found at SRTs from 20 to 30 days. T-N removal efficiency was 83.1% at a C/N ratio from 3.0 to 3.5. However, T-N removal efficiency decreased at C/N ratios over 3.5. Also, T-P removal efficiency increased with HRT at C/P ratios in the same condition. Maximum efficiency was 74.1% at a C/P ratio from 25 to 28. T-N removal efficiency was 79.2% and T-P removal efficiency was 65.3% after M4 mode operation (added to the internal recycle line connected to the anoxic reactor). The modified OD with spatial separation and internal recycling developed in this study is, therefore, believed to be an improvement for solving problems in the nutrient removal technologies.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.5
• /
• pp.202-206
• /
• 2005

Nitriding treatments were conducted on tool steel (SKD 61) at a temperature of $500^{\circ}C$ for 5 hr using high vacuum direct current (DC) plasma, with ammonia and argon as source gases. The structural and compositional changes produced in the nitrided layers by applying different ratios of Ar to $NH_{3}\;(n_{Ar}/n_{NH3}) were investigated using glancing x-ray diffraction (GXRD), optical microscopy, atomic force microscopy (AFM), micro-Vickers hardness testing, and pin-on-disc type tribometer. Nitriding case depths of around of $50{\mu}m$ were produced, varying slightly with different ratios of $n_{Ar}/n_{NH3}. It was found that the specimen surface hardness was 1150 Hv with $n_{Ar}/n_{NH3}=1, increasing to a maximum value of 1500 Hv with $n_{Ar}/n_{NH3}=5. With a further increase in ratio to $n_{Ar}/n_{NH3}=10, the surface hardness of the specimen reduced slightly to a value of 1370 Hv. These phenomena were caused by changes of the crystallographic structure of the nitride layers, i.e the $\gamma'-Fe_{4}N$ phase only was observed in the sample treated with $n_{Ar}/n_{NH3}$=1, and the intensity of the $\gamma'-Fe_{4}N$ phase were reduced but new phase of $\varepsilon'-Fe_{3}N$, which was known as a high hardness, with increasing $n_{Ar}/n_{NH3}. Also, the relative weight loss of counterface of the pin-on-disc with unnitrided steel was 0.2. And that of nitrided steel at a gas mixture ($n_{Ar}/n_{NH3}) of 1, 5, 7, and 10 was 0.4, 0.7, 0.6, and 0.5 mg, respectively. This means that the wear resistance of the nitrided samples could be increased by a factor of 2 at least than that of unnitrided steel.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.830-834
• /
• 2011

This paper is on the industrial synthesis process of anti-oxidant RD ((2,2,4-trimethyl-1,2-dihydroquinoline polymer $(C_{12}H_{15}N)_n$. n=2-4)).The content of dimer, trimer and tetramer of RD as the inspection targets, using the orthogonal design method - take the ratios of keto-amine, the reaction time, the reaction temperatures and the ratios of catalyst acid-amine as inspect factors - to optimized the reaction condition. The results indicate that the best ratio of keto-amine is 2:1, the time of salification and condensation is 3 hours and 7.5 hours. The range of temperature of salification and condensation is $135^{\circ}C$ and $120-125^{\circ}C$, and that the best ratio of acid-amine is 0.2: 1 (the proportion is the concentration ratio for mole). Under the optimization conditions, the yield of RD was stabilized and content of RD more than 45%.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.13-23
• /
• 2003

Organic carbon and nitrogen contents in suspended particulate matter (SPM) and surface sediments in seawater were measured in the Northern East China Sea in summer. The distribution of particulate organic carbon(POC) and particulate organic nitrogen(PON) were in the ranges of 54~481㎍/ℓ and 6~85㎍/ℓ, respectively, with relatively high level of concentrations in the western and southern sides of the study area. Also, there has been a significantly positive correlation between POC and PON, gradually increasing toward the deeper range of depth. Average C:N ratios of POC and PON of SPM were 6 in study area. The ratios of POC to PON of SPM increased as the range of depth increased, indicating nitrogen decomposes more rapidly than carbon and is considered to be influenced by the input of detritus from surface sediments. The distribution of total organic matter(TOM), total organic carbon(TOC) and total organic nitrogen(TON) in surface sediments were in the ranges of 3.1~9.6%, 0.282~0.635% and 0.022~0.069%, respectively, with relatively low range in the western and northern sides of the study area. The ratio of TOC to TON of surface sediments were in the range of 9.8~17.4(average of 13), strongly indicating the active role of the input from the terrestrial organic pollutants.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1003-1009
• /
• 2009

Copolymers of N-vinylpyrrolidone (NVP) comonomer with styrene (St), hydroxypropyl methacrylate (HPMA) and carboxyphenyl maleimide (CPMI) were synthesized by free radical polymerization using 2,2'-azobisisobutyronitrile (AIBN) initiator in 1,4-dioxane solvent. The copolymers formed were characterized by FTIR, $^1H$ NMR and $^{13}C$ NMR techniques and their thermal properties were studied by DSC and TGA. Copolymer composition was determined by $^1H$ NMR and/or by elemental analysis and monomer reactivity ratios (MRR) were estimated by the linear methods of Kelen-Tudos (K-T) and extended Kelen-Tudos (EK-T) and the non-linear approach. Copolymers of St and HPMA with NVP formed blocks of one of the monomer units, whereas alternating copolymers were obtained in CPMI-NVP, depending upon the side chain substitution. The MRR values are discussed in terms of monomer structural properties such as electronegativity and electron delocalization. The sequence distribution of monomers in the copolymers was studied by statistical method based on the average reactivity ratios obtained by EK-T method.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.80.1-80.1
• /
• 2017

We present preliminary results of KVN single dish telescope observations of 80 dense cores in the Orion molecular cloud complex which contains the Orion A, B, and ${\lambda}$ Orionis cloud. We investigate the behavior of the different molecular tracers and look for chemical variations of cores in the three clouds in order to systematically investigate the effects of stellar feedback. The most commonly detected molecular lines (with the detection rates higher than 50%) are N2H+, HCO+, H13CO+, C2H, HCN, and H2CO. The detection rates of dense gas tracers, N2H+, HCO+, H13CO+, and C2H show the lowest values in the ${\lambda}$ Orionis cloud. We find difference between molecular D/H ratios and N2H+/H13CO+ abundance ratios towards different clouds, and between protostellar cores and starless cores. Eight starless cores in the Orion A and B clouds exhibit high deuterium fractionations, larger than 0.10, while in the ${\lambda}$ Orionis cloud, no cores reveal the high ratio. These chemical properties could support that cores in the ${\lambda}$ Orionis cloud are affected by the photo-dissociation and external heating from the nearby H II region, which is a hint of negative stellar feedback on core formation. The striking difference between the [N2H+]/[H13CO+] ratios leads us to suggest that there are significant evolutionary differences between the Orion A/B and ${\lambda}$ Orionis clouds. In order to examine whether starless cores can be candidates of pre-stellar cores, we compared the core masses estimated from the 850 um emission to their Virial masses calculated from the N2H+ line data and find that most of them are not gravitationally bound in the three clouds.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.409-410
• /
• 2006

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.2
• /
• pp.147-156
• /
• 2000

In this study, the optimal operation parameters of MLE(Modified Ludzack-Ettinger) process treating the liquid supernatant separated from the slurry excreta of swine feedlot was studied as a promising biological treatment process. The nitrogen removal characteristics with different volume ratio between nitrification and denitrification reactor and the operational effect with different nitrogen loading rate, and different C/N($COD_{Cr}/TKN$) ratio were investigated. Based on the laboratory results, pilot MLE plant was operated to examine the effect of ambient temperature for five months including winter. The denitrification reactor which is 20% of total volume was proposed as the most optimal volume fraction for nitrification and denitrification. The optimum ratios of F/M and $F_N/M$ were increased with increase of the C/N ratio. However, optimum F/M ratio was changed more rapidly than $F_N/M$ ratio with increase of the C/N ratio. Therefore, MLE process is desirable to be controlled by F/M ratio in the range of high C/N ratio and by $F_N/M$ ratio in the range of low C/N ratio. Pilot MLE plant showed the higher removal efficiencies of COD and TKN in winter than in summer and was operated most stably at the temperature of $20{\sim}25^{\circ}C$ for mixed liqour.