• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.175-180
• /
• 2003

To develop the health/functional food materials, we investigated the cultural condition of mycelial growth on the solid state fermentation using the brown rise, Acanthopanax sp. and Artemisia sp., and also evaluated inhibitory activity of angiotensin converting enzyme (ACE) of hot water extracts from cultured media of Pleurotus eryngii. As the amount of Acanthopanax nnd Artemisia In the cultural media increased, the mycelial growth rate decreased. Especially, addition of Aeantopanax showed marked effect than Artemisia. Moisture contents in three kinds of cultured media were in the range of $10.9{\sim}12.0%$. Crude protein fat and crude fiber content were the highest value in cultured brown rice medium, whereas the mineral contents (Ca, K and P) were higher in the Acanthopanax supplemented (5%) medium than the other media, The extraction yield of the Artemisia supplemented (5%) medium was the highest value of 4.80%, and the pH of hot water extract from cultured brown rice medium showed the lowest value of 6.1. Lightness (L) values in three kinds of extracts from cultured media were in the range of $85.8{\sim}87.1$. Redness (a) value was the highest In the brown rice and Acanthopanax supplemented media, however cultured Artemisia supplemented medium showed the highest value in yellowness (b). In comparison of sugar components analyzed by the thin layer chromatography with three kinds of samples, two spots were detected to be glucose and maltose, respectively. The ACE inhibitory activity of hot water extract from the cultured Acanthopanax supplemented medium showed the highest value at the concentration of $0.2{\sim}1.0\;mg/ml$. These results suggest that the Pleurotus eryngii grew in natural media using brown rice and Acanthopanax can be supplemented to the brown rice medium to enhance its ACE inhibitory activity as health/functional food materials.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.331-340
• /
• 2008

A method of measuring the current and voltage is suggested in the circuit of cold cathode fluorescent lamps (CCFLs) which are driven at a high frequency of $50{\sim}100\;kHz$ and a high voltage of several kV. It is difficult to measure the current and voltage in the lamp circuit, because the impedance of the probe at high voltage side causes the leakage current and the variation of luminance. According to the analysis of equivalence circuit with the probe impedance and leakage current, the proper measuring method is to adjust the input DC voltage and to keep the specific luminance when the probe is installed at a high voltage circuit. The lamp current is detected with a current probe or a high frequency current meter at the ground side and the voltage is measured with a high voltage probe at the high voltage side of lamp. The lamp voltage($V_C$) is measured between the ballast capacitor and the lamp electrode, and the output voltage($V_I$) of inverter is measured between inverter output and ballast capacitor. As the phases of lamp voltage($V_C$) and current ($I_G$) are nearly the same values, the real power of lamp is the product of the lamp voltage($V_C$) by the lamp current($I_G$). The measured value of the phase difference between inverter output voltage($V_I$) and lamp current($I_G$) is appreciably deviated from the calculated value at $cos{\theta}=V_C/V_I$.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.43-49
• /
• 2012

In this study, we investigated the antibacterial activity and stability of a cream containing Hippophae rhamnoides leaf extract. The MIC values of ethyl acetate fraction from an H. rhamnoides leaf on Escherichia coli, Pityrosporum ovale, Propionibacterium acnes and Staphylococcus aureus were 0.5%, 0.25%, 0.25% and 0.06%, respectively. Stability evaluations, pH, viscosity and absorbance of the cream containing 0.25% ethyl acetate fraction of H. rhamnoides, were performed. The cream was measured under 4 different temperature conditions under sunlight at 2-week intervals for 12 weeks. The viscosity and pH were measured by a comparison of the experimental cream with a similar control cream. The H. rhamnoides extract was found to have contributed to the stability of the emulsion product via a protective effect in maintaining the viscosity of the cream against sunlight. The absorbance variations of the experimental cream at 270 nm were, under sunlight; $45^{\circ}C$, $37^{\circ}C$, $25^{\circ}C$, and $4^{\circ}C$. In addition, any change in color or smell was not observed through the 12 weeks of the experimental period. These results indicated that the cream containing 0.25% ethyl acetate fraction of H. rhamnoides leaf extract was stable. Accordingly, this suggests that further study is needed to provide additional information for manufacturers, who are seeking the application of the extract to improve anti-oxidant and antibacterial activities and the stability of cosmetic products.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.330-338
• /
• 2011

BACKGROUND: This study was conducted to investigate the agricultural product (Pulses, Lettuces, Pumpkins, Apples, Pears and Tangerines) in Korea, monitoring of cadmium (Cd) and lead (Pb) contaminations of agricultural products in cultivated areas and abandoned mine areas were investigated, and risk assessment was performed through dietary intake of agricultural products. METHODS AND RESULTS: The average contents of Cd and Pb ranged from 0.001 to 0.018 mg/kg and from 0.007 to 0.032 mg/kg respectively. The result was showed that contents of Cd and Pb did not exceed maximum residual levels established by CODEX except pumpkins and apples. The average daily intake were in the range of $1.06{\times}10^{-3}$ to $4.76{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Cd, $4.53{\times}10^{-3}$ to $8.35{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Pb for general population, based on the Korean public nutrition report 2008. The Hazard Index (HI) from the ratio analysis between daily exposure and safety level values was smaller than 1.0. CONCLUSION(s): This results demonstrated that human exposure to Cd and Pb through dietary intake of agricultural produces from abandoned mine areas might not cause adverse effect exceeding to those from non-contaminated areas.

• Korean Journal of Korean Medical Institute of Dermatology and Aesthetics
• /
• v.1 no.1
• /
• pp.127-144
• /
• 2005

This study compared the activity of the aerial part of P. japonicum with its root in order to examine the possibility of the medicinal use of the aerial part, which has not been used as medicine, in substitute for the root that has traditionally been used as medicine. For this purpose, the author measured the proliferation of Human $CD4^-$ T cells, which are related to immunity, the differentiation of HL-60 cells, and the contents of IL-6, IgE and $TNF-{\alpha}$ and compared their anti-cancer effect on Hep3B and A549 cells. The results of this study are as follows: 1. As for Human $CD4^-$ T cells, $1.0\;g/{\ell}$ methanol extract from the aerial part promoted the proliferation of the cells 1.8 times higher while $1.0\;g/{\ell}$ methanol extract from the root did by 1.76 times higher compared to the control group. 2. As for HL-60 cells, methanol extract and water extract from the aerial part showed differentiation 1.14 times higher and 1.12 times higher respectively while methanol extract and water extract from the root did 1.14 times higher and 1.07 times higher compared to tile control group. 3. Cell density was highest on Day 4 of culture in all samples, Methanol extracts from the aerial part and the root showed activities of $7.9{\times}10^3\;cells/m{\ell}$ and $7.5{\times}10^3\;cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did activities of $5.3{\times}10^3\;cells/m{\ell}$ and $6.1{\times}10^3\;cells/m{\ell}$. 4. The secretion of IL-6 was highest on Day 4 of culture. Methanol extracts from the aerial part and the root showed secretions of $6.7{\times}10^{-3}\;pg/cells/m{\ell}$ and $7.2{\times}10^{-3}\;pg/cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did secretions of as high as $7.0{\times}10^{-3}\;pg/cells/m{\ell}$ and $6.0{\times}10^{-3}\;pg/cells/m{\ell}$. 5. As for the production of IgE, water extract from the root effectively inhibited the product at $1,000\;{\mu}g/m{\ell}$, methanol extract from the root at $10\;{\mu}g/m{\ell}$ and $100\;{\mu}g/m{\ell}$, water extract from the aerial at $1,000\;{\mu}g/m{\ell}$, and methanol extract from the aerial part at $1,000\;{\mu}g/m{\ell}$. 6. According to the result of measuring the content of $TNF-{\alpha}$, methanol extracts from the root and the aerial part showed inhibition effect at $10\;{\mu}g/m{\ell}$, $100\;{\mu}g/m{\ell}$ and $1,000\;{\mu}g/m{\ell}$. 7. As for liver cancer cell Hep3B, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 78% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 56% and 59%. 8. As for lung cancer cell A549, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 75% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 48% and 45%. The results of this study presented above show that the aerial part of P. japonicum has immunizing and anti-cancer effects as high as its root, which has commonly been used as medicine. There should be more in-depth research on the aerial part of P. japonicum in the future.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.37-46
• /
• 1980

Hand deboned and mechanically deboned chicken meat were produced from domestic broilers and spent layers. Meat yield, chemical composition, functional characteristics, stability during storage, and microbiological properties were investigated Chicken patties and frankfurters were also manufactured by varying the relative proportion of MDCM to HDCM as raw materials, ana their palatability, shelf-life and textural properties were evaluated. The obtained results were as follows: 1) 35% of carcass wt was recovered as HDCM and 45% as MDCM, total meat yield reaching 80% of carcass wt. 2) Moisture, protein, fat, ash and Ca content of MDCM were 65, 12, 20, 1.7 and 0.2-0.4%,respectively. MDCM was higher in fat, ash and Ca, but significantly lower in moisture and protein. Total pigment content of MDCM was 2.5 times higher than that of HDCD such high content being attributed to the increased inclusion of hemoglobin. 3) The emulsifying capacity (ES) of MOCM per g meat was only 70% that of HDCM. but when ES was expressed on unit g of protein basis MDCM showed even higher ES than HDCM primarily due to tile higher proportion of salt soluble protein fraction. 4) Since the TBA values of MDCM increased rapidly after 4 weeks of frozen storage at -20$^{\circ}C$, the maximum possible storage period of MDCM is estimated to be about 4 weeks. 5) Total microbial counts of MDCM was approximately 1.8${\times}$10$\^$6/g/, showing no great difference from HDCM or red meat. 6) Chicken patty containing MDCM showed gradual increase in TBA value during frozen storage, but its storage up to 8 weeks presented no problems in flavor stability. 7) Color score an4 total palatability of chicken Patty were best for the product containing 30% MDCM. It was also concluded that MDCM can be included in the patties up to 50% of total meat with good results, but more than 70% was not recommended 8) The formulation of MDCM up to 50% in frankfurter gave quite satisfactory acceptability and textural properties comparable to frankfurter made of 100% MDCM, but the inclusion of more than 70% MDCM was not recommended 9) The TBA value of frankfurter containing MDCM did not increase to any great extent until 4 weeks of storage at 4$^{\circ}C$, indicating no unique problems in flavor instability compared to regular frankfurter. 10) It was concluded that processed meat products such as patties and frankfurters containing MDCM up to 30-50% of total meat ingredients gave satisfactory results in color, texture and palatability, comparable to regular products.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.55-80
• /
• 2009

Technology innovation activity plays a pivotal role in constructing the entrance barrier for other firms and making process improvement and new product. and these activities give a profit increase and growth to firms. Thus, technology innovation activity can reduce the default risk of firms. However, technology innovation activity can also increase the firm's default risk because technology innovation activity requires too much investment of the firm's resources and has the uncertainty on success. The purpose of this study is to examine the effect of technology innovation activity on the default risk of firms. This study's sample consists of manufacturing firms listed on the Korea Securities Market and The Kosdaq Market from January 1,2000 to December 31, 2008. This study makes use of R&D intensity as an proxy variable of technology innovation activity. The default probability which proxies the default risk of firms is measured by the Merton's(l974) debt pricing model. The main empirical results are as follows. First, from the empirical results, it is found that technology innovation activity has a negative and significant effect on the default risk of firms independent of the Korea Securities Market and Kosdaq Market. In other words, technology innovation activity reduces the default risk of firms. Second, technology innovation activity reduces the default risk of firms independent of firm size, firm age, and credit score. Third, the results of robust analysis also show that technology innovation activity is the important factor which decreases the default risk of firms. These results imply that a manager must show continuous interest and investment in technology innovation activity of one's firm. And a policymaker also need design an economic policy to promote the technology innovation activity of firms.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.1
• /
• pp.7-14
• /
• 2016

The objective of this study was to determine the effect of bacterial inoculation (Lactobacillus plantarum or combo inoculant mixed with Lactobacillus plantarum and Lactobacillus buchneri) and addition of fibrolytic enzyme on chemical compositions and fermentation characteristics of whole crop barley (WCB) and triticale (TRT) silage, their ruminal in vitro fermentation, and digestibility. In TRT silage, enzyme addition significantly (p<0.01) decreased NDF content compared to no enzyme addition treatment. Organic acids such as lactate and acetate contents in WCB and TRT silages were significantly (p<0.01) higher compared to those in the control. Particularly, lactate content was the highest in L. plantarum treatment. Fibrolytic enzyme treatment on both silages had relatively higher lactic acid bacteria content, while mold content was lower in both treatments compared to that in the control. In vitro dry matter digestibility was generally improved in WCB silages. It was higher (p<0.01) in TRT with mixed treatment of L. plantarum, L. buchneri, and enzyme compared to others. In vitro ruminal acetate production was relatively higher in treatments with both enzyme and inoculant additions compared to that in the control. Therefore, the quality of silage and rumen fermentation could be improved by inoculants (L. plantarum and L. buchneri) regardless whether whole crop barley (WCB) or triticale (TRT) silage was used. Although it was found that fibrolytic enzyme addition to both silages had various quality and rumen fermentation values, further study is needed.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.22-30
• /
• 2014

In this study, purple sweet potato bread was prepared by the addition of 0.005%, 0.010%, 0.015% and 0.020% hemicellulase. It's effect on product quality and consumer evaluation were examined. The results showed that the dough pH and total titratable acidity were not significantly different between samples. In the fermentation power of dough expansion, a 0.015% addition sample was the highest between the samples. The bread pH decreased significantly as hemicellulase was increased, whereas. Bread total titratable acidity was significantly decreased. The addition of hemicellulase samples were significantly higher in specific volume and baking loss than the control sample. The moisture content was not significantly different between samples. In colors, the lightness of the control sample was the highest, the redness of the 0.020% addition sample was the lowest while the yellowness of the control was the lowest. The hardness and the fracturability decreased significantly as hemicellulase was increased. The resilience indicated reverse effects. In consumer evaluation, the color and softness were not significantly different between samples. And the hemicellulase addition of samples was higher in flavor than that of the control sample. The overall acceptability was the highest at 5.67 with a 0.010% addition sample. According to these results, the addition of 0.010% hemicellulase in purple sweet potato bread would be the optimum level.