• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.19-36
• /
• 2003

The manager of manufacturing industry just not to have known what to do related to the law of product liability(PL) that was put into operation in July 1, 2002. The law of PL is a public law about defective product, which was established in order to compensate consumer's damages of property and body caused by product, to make sound society by the safety products and to take international competitiveness. But the existing civil law has been having clause that compensation to be taken is limited. The law of PL is resolving this limitations and is characterized by the easy relief from damages of defective product. The decision in the case of Green-man has been a precedent since the court sentenced the manufacturer to liability. The law of PL has been in force in 27 countries, including all of the EU countries, Japan, Philippines and China. It has been shown that the corporations which meet the Global Standard, could survive in global competition. The economic effects by the law of PL are the increase of consumers relief production cost by the lawsuits. This paper will recommend more biref method that is able to cover PSMS by use of QMS. It will make domestic corporation improve in the plan, manufacture and sale of products to meet the Global Standard.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.6
• /
• pp.357-361
• /
• 2002

Continuous production of lactic acid from glucose by Lactobacillus rhamnosus with cell recycling using an acoustic cell settler was carried out. The performance of the system, such as the concentration of cell and product were compared with the control experiment without recycling. The acoustic settler showed cell separation efficiency of 67% during the continuous operation and the cell concentration in the fermentor with recycle exceeded that of the control by 29%. Com-pared with the control, tactic acid production was increased by 40%, while glucose consumption was only increased by 8%. The higher value of lactic acid production to substrate consumption (Yp/s, product yield coefficient) achieved by cell recycling is interpreted to indicate that the recycled cell mass consumes less substrate to produce the same amount of product than the control Within system environmental changes due to the longer mean cell residence time induced the cells maintaining the metabolic pathways to produce Less by-Product but more product, lactic acid.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.66-67
• /
• 2013

Replacing a large amount of ground granulated blast furnace slag is limited because early age strength is low due to latent hydraulic property despite excellence of long-term strength. This study aimed to examine produceableness of high-activated ground granulated blast furnace slag using slag by-product from steel process. As experimental variable, the properties of strength development were analyzed by setting fineness and replacement ratio of slag by-product, curing conditions, and W/B. The results of study showed that high-activated ground granulated blast furnace slag using slag by-product as an activator improve the compressive strength of mortar. It is expected to be used as binder for secondary product of concrete considering curing and mixing conditions because high-activated ground granulated blast furnace slag can be hydrated by itself.

• The Research Journal of the Costume Culture
• /
• v.27 no.2
• /
• pp.109-122
• /
• 2019

With the greater importance of lifestyle shops and experience marketing, research is needed for the effective experience marketing of lifestyle shops by fashion product type. This study establishes effective and differentiated experience marketing strategies for fashion lifestyle shops by examining the effect of the experience marketing satisfaction with lifestyle shops on purchase intention and loyalty. This study categorizes lifestyle shops by fashion product types into a suit-oriented lifestyle shop, a casual/leisure/sportswear-oriented lifestyle shop and a home fashion lifestyle shop, Then a survey was conducted on participants who had visited lifestyle shop. As an analysis method, factor analysis, reliability analysis and regression analysis were conducted. In this study, we identified the experience marketing factors of fashion lifestyle shops. This study found that the satisfaction from experience marketing factors of fashion lifestyle shops by fashion product types affected purchase intention and loyalty differently. Considering the results of this study, it will be able to increase not only purchase intention and loyalty but also brand sustainability by establishing, applying, and executing a differentiated strategy considering the detailed factors of experience marketing for each fashion product type when planning and operating a fashion lifestyle shop. Through this study, effective marketing of fashion lifestyle shops by fashion product type will be implemented.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.203-210
• /
• 2007

Since the emissions composition from the household products have potentially been associated with health risks for building occupants, the chemical composition emitted from the products should be surveyed. The current study identified the emission composition for 42 liquid household products, using a purge-and-trap method. This evaluation was done by classifying the household products into five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). Nineteen compounds were chosen on the basis of selection criteria. The quality control program for purge-and-trap and analytical systems included tests of laboratory blank Tenax traps and blank water samples, and the determination of calibration equation, measurement precision, method detection limit (MDL), and recovery. The number of chemicals varied according to the product categories, ranging from 4 for the product category of bleaches to 12 for the product categories of air fresheners and nail color removers. For all product categories, the emission composition and concentrations varied broadly according to product. It is noteworthy that most household products emit limonene: 19 of 25 cleaning products; 5 of 6 deodorizers; 1 of 3 pesticides; 3 of 3 color removers; and 4 of 5 polishes. It was suggested that the use of household products sold in Korea could elevate the formation of secondary toxic pollutants in indoor environments, by the reaction of limonene with ozone, which entered indoor environments or might be generated by indoor sources such as electronic air cleaning devices and copying machines.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1335-1341
• /
• 2006

We selected a Lactobacillus spp. from Korean healthy infant feces based upon their antioxidant activity. This strain was identified as Lactobacillus gasseri by 16S rDNA sequencing, and named Lactobacillus gasseri NLRI-312. In the present study, we investigate the protective effect of this strain on the $H_2O_2$ induced damage to cellular membrane lipid and DNA in Jurkat cells. To estimate the extent of cellular lipid peroxidation inhibition, MDA (malondialdehyde) was measured, and DNA damage was tested by the comet assay. We also examined probiotic properties including tolerance to acid and bile, antibiotic resistance. From the results obtained, the supplementation of Jurkat cells with NLRI-312 decreased in DNA damage, while no effect was shown on MDA decrease. In probiotic properties, this strain was resistance to both acid and bile, showed considerably higher survival when incubated in pH 2 or 1% bile salts (w/v). We concluded that the NLRI-312 could be used as potential probiotic bacteria, with the effect of reducing DNA damage induced by $H_2O_2$.

• The Korean Journal of Pesticide Science
• /
• v.5 no.1
• /
• pp.24-29
• /
• 2001

This study was conducted to investigate insecticidal activities of Ginkgo biloba (L.) leaves-derived bilobalide and its hydrolysis and oxidation products against adults of Nilaparavata lugens Stal. To find out active insecticidal moiety of bilobalide, decomposed intermediates and derivatives of bilobalide were made by hydrolysis, oxidation, and acetylation. The structures of hydrolysis product by base and oxidation product by acid were identified as cyclopentenone analogues and trilactone sesquiterpene from dehydration of bilobalide, respectively. Insecticidal activities of the decomposed intermediates and the derivatives of bilobalide decreased in the order of bilobalide, monoacetate, ginkgolide C, oxidation product, diacetate, and hydrolysis product. Therefore, trilactone structure of bilobalide may be essential for its insecticidal activity.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.210-223
• /
• 1999

An efficient management of product information is critical to the enhancement of corporate competitiveness. Product information is often distributed in term of organization, geography, and time. With the rapid increase in the use of Internet or its associated Web and intranets, it has been accelerating to integrate the distributed information. In this research, a Distributed, Open, Intelligent Product data Management system, namely DOI-PDM, is developed. This system deals with product information following the STEP standard, and its operation is controlled by a Web-based workflow management system. CORBA is employed to ensure interoperability among distributed objects. It is intended to achieve openness by using various standards, such s STEP, KQML, SGML, and WfMC specifications. One major difficulty in managing it needs also be properly modified according to the dynamics. It however is very hard to have a prior anticipation to the dynamics. It however is very hard to have a prior anticipation to the modification requirements in practice. We introduce a process adaptation model and a use of intelligent agent technology. An agent is delegated to modify process definitions during run-time. A method of agent implementation and a proper communication scheme among te agents are proposed. Also developed in this research is a STEP-based content search system which can co-work with the agents by providing relevant product information that the agents require.

• Journal of the Speleological Society of Korea
• /
• no.71
• /
• pp.5-11
• /
• 2006

A theoretical investigation of the solid phase mechanochemical synthesis of nano sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3 mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano TlCl by dilution of initial (2NaCl+$Tl_2SO_4$) mixture with the exchange reaction product (diluent,$zNa_2SO_4$, z=z*=11.25) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano TlCl obtained experimentally were compared with those for the model reaction KBr+TlCl+zKCl=(z+1) KCl+TlBr (z=z1*=13.5), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.391-396
• /
• 2000

Today most companies are designing their automobile shapes by using 3 dimensional CAD software, CATIA. And they used to design 2 dimensional press dies to do some elastic work on their products, but they are currently trying to make use of dimensional software, Pro-Engineer. In this case, they have to change the 3 dimensional product design data to the proper format data for the following process. This paper will show the data loss and the deformation during data transfer between CATIA and Pro-Engineer, and then suggest a solution for these problems. Product's surface will be automatically placed by automatic press tipping angle setting in CATIA to prevent the product from being stuck in the press die. The 2 dimensional section view which is based on the tipping angle setting is created by Z-map. And, to remove the data loss and the data deformation in pro-Engineer, the product surface are delivered to the next process after it is changed to the 2 dimensional Z-map curves in CATIA. finally, this paper suggests an algorithm to develop the automatic design program for the press layout which regenerates product shape surface from the previous process.