• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.421-427
• /
• 2016

We aim to offer basic materials about infection management through conducting bacterial contamination test about general radiography equipment and CT equipment installed in ER of three general hospitals with 100 sickbeds or more located in Gyeongsangbuk-do Province, and suggest management plan. It had been conducted from 1st December 2015 to 31st December, and objects were general radiography equipment and CT equipment of emergency room located in Gyeongsangbuk-do Province. For general radiography equipment, sources were collected from 4 places such as upper side of control box which employees use most, upper side of exposure button, whole upper side of table which is touching part of patient's skin, upper side of stand bucky's grid, and where patients put their jaws on. For CT equipment, sources were collected from 3 places such as upper side of control box which radiography room employees use most, X-ray exposure button, whole upper side of table which is touching part of patient's skin, and gantry inner. Surface contamination strain found at general radiography equipment in emergency room of radiology are Providencia stuartii(25%), Stenotrophomonas maltophilia(18%), Enterobacter cloacae(8%), Pseudomonas species(8%), Staphylococcus epidermidis(8%), Gram negative bacilli(8%), and ungrown bacteria at incubator after 48 hours of incubation (67%) which is the biggest. Most bacteria were found at upper side of stand bucky-grid and stand bucky of radiology's general radiography equipment, and most sources of CT equipment were focused at patient table, which means it is contaminated by patients who have various diseases, and patients who have strains with decreased immunity may get severe diseases. Thus infection prevention should be made through 70% alcohol disinfection at both before test and after test.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.117-123
• /
• 2010

Tooth eruption is the movement of the tooth from the developing place in the alveolar bone to the functional position in the oral cavity. The permanent incisors originate from the dental lamina on the lingual side of preceding deciduous tooth and erupt to the level of the occlusion through the well developed gubernacular cord. Ectopic eruption is a developmental disturbance in the eruption pattern of the permanent dentition. Most of the ectopically erupted lower incisor has been found in lingual side. The ectopically erupted tooth could be repositioned by orthodontic force in the early mixed dentition, which could help preventing the problems of loss of space and the lingual tilting of the lower anterior teeth. An eight-year-old girl visited the department of pediatric dentistry, Yonsei Dental University Hospital, for the evaluation and the treatment of the lower right lateral incisor, which was horizontally erupted in the lingual side, parallel to the mouth floor. Her tongue was placed on the labial side of that tooth. There was no previous dental history of dental caries or trauma on the pre-occupied primary incisor. Clinical and radiographic examinations including the computed tomography(CT), showed no evidence of dilacerations on root. Therefore, we decided to start active orthodontic traction of the lower right lateral incisor. We designed the fixed type of buccal arch wire and the lip bumper with hook for the traction. Button was attached to the lingual side of the ectopically positioned tooth. Elastic was used between the appliance and the button on that tooth. After the tooth become upright over the tongue level, appliance was change to the removable type and periodic check-up with occlusal guidance was followed to monitor the position of the tooth. In this case using the fixed appliance with modified form of lip bumper and hook embedded in acrylic part instead of extraction was very efficient up-righting the ectopically erupted tooth toward the occlusal plane.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.137-144
• /
• 2013

This study was carried out to investigate storage stability of harvested mushroom in developed varieties of button mushroom through identification of quality change during 35 days. The mushroom harvested up to $2^{nd}$ flush mushroom was stored on different storage temperature(4, 7, $10^{\circ}C$) and weight, length, thickness, color of pileus and stipe in fruit body was tested every 7 days. The morphological trait and color of stipe in fruit body were influenced by harvesting period and storage temperature. On the morphological traits of fruit body, mushroom harvested at $2^{nd}$ flush showed smaller difference than those at $1^{st}$ flush and mushroom stored at $4^{\circ}C$ indicated more difference than ones at the other temperature. Mostly color of pileus in brown button mushroom had lower ${\Delta}E$ (color difference) than white mushroom during storage period. The color of pileus of fruit body in white mushroom had low ${\Delta}E$ at $4^{\circ}C$ whereas that of brown mushroom was low at $10^{\circ}C$. The safe period of storage based on the L value is 7 days under a specified environmental condition. 'Seolgang' was stored for 14 days as good quality of mushroom, 'Saedo' had best quality after harvesting and 'Seojeong' was most stable during storage change in white mushroom varieties.

• Korean Journal of Cognitive Science
• /
• v.17 no.2
• /
• pp.103-118
• /
• 2006

The main purpose of this paper is to investigate the effects of discourse topic and morpho-syntactic verbal information on the resolution of null pronouns in the Korean narrative text within the framework of the construction-integration theory (Kintsch, 1988, Singer & Kintsch, 2001, Graesser, Gernsbacher, & Goldman. 2003). For the purpose of this paper, two conditions were designed: an explicit condition with both a consistently maintained discourse topic and the person-specific verb modals on one hand, and a neutral condition with no discourse topic or morpho-syntactic information provided, on the other. We measured the reading tines far the target sentence containing a null pronoun and the question response times for finding an antecedent, and the accuracy rates for finding an antecedent. During the experiments each passage was presented at a tine on a computer-controlled display. Each new sentence was presented on the screen at the moment the participant pressed the button on the computer keyboard. Main findings indicate that processing is facilitated by macro-structure (topicality) in conjunction with micro-structure (morpho-syntax) in pronoun interpretation. It is speculated that global processing alone may not be able to determine which potential antecedent is to be focused unless aided by lexical information. It is argued that the results largely support the resonance-based model, but not the minimalist hypothesis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.3829-3849
• /
• 2014

Continued advances in the field of histo pathology (and cyto pathology) over the past two decades have resulted in dramatic changes in the manner in which these disciplines are now practiced. This is especially true in the setting of a large university hospital where the role of pathologists as clinicians (diagnosticians), undergraduate and postgraduate educators, and researchers has evolved considerably. The world around us has changed significantly during this period bringing about a considerable change in our lifestyles and the way we live. This is the world of the internet and the world-wide web, the world of Google and Wikipedia, of Youtube and Facebook where anyone can obtain any information one desires at the push of a button. The practice of histo (and cyto) pathology has also evolved in line with these changes. For those practicing this discipline in a poor, developing country these changes have been breathtaking. This is an attempt to document these changes as experienced by histo (and cyto) pathologists practicing in the biggest center for Histopathology in Pakistan, a developing country in South Asia with a large (180 million) and ever growing population. The Section of Histopathology, Department of Pathology and Microbiology at the Aga Khan University Hospital (AKUH) in Karachi, Pakistan's largest city has since its inception in the mid-1980s transformed the way histopathology is practiced in Pakistan by incorporating modern methods and rescuing histopathology in Pakistan from the primitive and outdated groove in which it was stuck for decades. It set histopathology in Pakistan firmly on the path of modernity and change which are essential for better patient management and care through accurate and complete diagnosis and more recently prognostic and predictive information as well.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.55-62
• /
• 2013

The exoskeleton robot to assist walking of hemiplegia patients or disabled persons has been studied in this paper. The exoskeleton robot with degrees of freedom of 2 axis has been developed and tested for joint motion. The obtained EMG signal from normal person was analyzed and the control signal was extracted from it for convenient and automotive performance of assistance robot to help hemiplegia patient walks as normal person does. the purpose of using FES(Functional Electrical Stimulation) for hemiplegia patient's walk is to restore damaged body function by this, but this could give fatal electrical shock to patients by wrong use or cause quick fatigue in muscle by continuous stimulation. The convenient movement of hemiplegia patients with minimum muscle fatigue was looked possibly by operation of assistance robot exoskeleton using control signal. and the walking assistance exoskeleton robot seemed works more efficiently than using FES stimulator. The experiment in this study was performed based on usual motion in our life like walking, standing-up, sitting-down, and particularly feedback control system using Piezo sensor along with button switch was applied for smooth swing motion in walking. The experiment also shows that hemiplegia patients can move conveniently by using electromyogram signal of healthy leg for the operation signal of assistance robot system attached at damaged symmetrical leg.

• Korean Journal of Veterinary Research
• /
• v.28 no.1
• /
• pp.145-154
• /
• 1988

Ixodes signatus nymphs were subjected to the scanning electron microscopy for the observation of the major physiological sense organs including the Hailer's organ. Finger prints and variable sensory setae were found on the body surface, and especially well developed setae were identified on the article IV and on the anal lobes. A central button-like organelle and numerous small holes were found in the spiracular plate. The Haller's organ was identified at the distal point of the tarsus I and regarded as the major sensory organ, chemoreceptor. Tow types of sensory setae were observed, the shorter ones in front of the organ and the longer ones in distal front as well as near behind of the organ. The fully opened organ was ellipsoidal and a total of seven basiconic sensory pegs rooted deeply and shaped as well arranged hook-like was found inside the organ.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2017

Objective: This study aims to compare the usability of the adaptive touch design method with that of the height adjustable design method that are applied to the Korean QWERTY keyboard and Naratgul keyboard on smartphones, examine the results, and present practical implications. Background: Smartphone manufacturers have failed to satisfy every user with their uniform touch keyboard designs that do not consider the high use rates of keypad use. In reality, touch keyboard designing customized for every individual is impossible, but there need to be researches on was to improve usability by having touch areas changed automatically depending on user behaviors or having users adjust the keyboard height depending on their hand size. Method: As for the design methods, an object group was given smartphones with the adaptive touch design method and the other group those with the height adjustable design method. As they entered the same characters in the smartphones, typing error rates and text input speed were measured and the average values were compared. 35 individuals who would frequently use smartphones in daily life participated in the experiment. The group variable was the type of touch keyboards, and the test variables were typing error rates and text input speed, for which a T-test was implemented. Results: As for the QWERTY keyboard, the significant improvement effect was verified as the typing error rate of the adaptive touch design method was 4.21% but that of the height adjustable design method was 3.28% although there was no significant difference in terms of text input speed. As for the Naratgul keyboard, in contrast, the typing error rate of the adaptive touch design method was 2.5% while that of the height adjustable design method was 1.48%, which indicates a measure of improvement, but the effect was not significant. On the other hand, the text input speed per minute was improved as much as 22.2%, which is significant. Conclusion: First, the Korean touch keyboard usability of the adaptive touch design method and that of the height adjustable design method, when applied to Model A of Company L, showed significant difference from each other. Second, the height adjustable design method was applied to the QWERTY keyboard, the typing error rate was improved significantly. This indicates that as the keyboard height was raised, the number of buttons within the range of fingering decreased, decreasing the touch bias was reduced. Third, the height adjustable design method was applied to the Naratgul keyboard, the text input speed was improved. Application: When the QWERTY keyboard was applied to a smartphone as small as 5.5inch or less, it is highly probably that the height adjustable design method decreases the typing error rate. It may be considered to develop additional UX functions to make the keyboard font larger or give users the option to adjust button intervals in utilization of the SW advantages of the height adjustable design method.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.115-122
• /
• 2018

Noonan syndrome is characterized by distinctive facial features, short stature, and congenital heart disease. It is a congenital genetic disorder with a prevalence of between 1/1,000 and 1/2,500 in both genders. An 11-year-old boy with Noonan syndrome visited the hospital with an ectopically positioned tooth. A pulmonary stenosis was diagnosed and his growth and development were delayed. In many cases of this diseases there is obvious hemostasis, which he was not experiencing. His facial appearance showed characteristic features of Noonan syndrome. The patient showed a dental class II relationship, labioversion of the upper anterior teeth, and a shallow overbite. Radiographic examination revealed that the upper right canine was ectopically positioned, which led to root resorption of the upper right lateral incisor. A lateral cephalometric radiograph revealed a craniofacial pattern that was within normal limits. Surgical opening and button attachment on the impacted upper right canine were performed and traction was applied on the impacted tooth using a removable appliance. This patient was mildly affected by Noonan syndrome and showed some dental problems. However, few studies have reported the oral characteristics of Noonan syndrome despite its high incidence. Thus, this case report describes the oral features and management of Noonan syndrome.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8933-8939
• /
• 2015

In this paper, we designed a multi humanoid robot control method for performing an exhibition that will maximize the efficiency and user convenience and implementation. In recent years, an increasing number of case and to take advantage of the robots in the field performances and exhibitions, plays, musicals, orchestra performances are also various genres. In concert with the existing small humanoid exhibition to source from outside by using a computer and MP3 player and play, while pressing the start button of communication equipment for the show to start the robot began performing with the zoom. Thus, due to the dual source and robot operation and synchronization does not work well is the synchronization of the start of the concert sound starting point of the robot and robot motion and sound are reproduced separately were frequently occurs when you need to restart the show. In addition, when the center of gravity or lose the robots who were present during the performance problems such as performance or intervene to restart the show. In order to overcome this, in this paper, Multi-small humanoid robot was designed to control the efficiency and the user of the GUI-based human interface S/W to maximize convenience, Zigbee communication to transmit a plurality of data in al small humanoid It was used. In addition, targeting a number of the small humanoid robot demonstrated the effectiveness and validity of the user's convenience by gender actual implementation.