• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1512-1514
• /
• 2005

Catalytic properties of Ni-Zr$O_2$ catalysts prepared by coprecipitation have been studied for the gas-phase hydrogenation of 1,3-butadiene to butenes. The coprecipitation method led to the solid solution of Ni-Zr$O_2$, which contains highly resistant Ni species to thermal reduction with H2. Nickel species of the solid solution were highly dispersed in the ZrO2 lattice, so that the reduced catalysts were selective for hydrogenation of 1,3-butadiene to butenes (99.9%) even in the presence of 1-butene.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.73-78
• /
• 2004

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system. To investigate the durability property of core part of injector in liquid phase LPG injection system, leakage test, SEM test of injectors and analysis of unvaporized fuel components with various LPG fuel qualities were tested. The experimental results showed that no serious problem in durability test using favorable LPG fuel quality, while high leakage amount due to the large scratches in the needle and nozzle of the injector were found using LPG fuel with highly containing olefin components, especially butadiene species.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1331-1336
• /
• 2009

Photolysis of (2-hydroxyethoxyphenyl)pentamethyldisilane 2 in benzene provides a novel intramolecular cyclization photoproduct 9 which was probably formed from the intramolecular reaction to form a seven-membered ring in silatriene intermediate 7 and then the photochemical disrotatory ring closure of 1,3-butadiene moiety to cyclobutene. Irradiation of 2 in methanol afforded photoproducts 5 and 6 which were formed by the nucleophilic attack of methanol to $\beta$ or $\alpha$ silicon atom in pentamethyldisilanyl group of the photoexcited state of 2. Compounds 10 and 11 were also formed by the same way as in the formation of the photoproducts 5 and 6 in the photolysis of (2-allyloxyethoxyphenyl)pentamethyldisilane 3 in methanol solvent. Photoreaction of (2-acetoxyethoxyphenyl) pentamethyldisilane 4 in methanol gave a photoproduct 12 which was formed via the elimination of dimethylsilylene species in the photoexcited state of 4.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.108-121
• /
• 1998

Using gas chromatography, the light hydrocarbon emissions were analyzed from SI engine fueled with methane and liquified petroleum gas(LPG), and the effects of fuel and engine operating condition were discussed. For this purpose, 14 species of light hydrocarbon including 1, 3-butadiene were separated, calibrated with standard gas, and measured from undiluted emissions. The brake specific hydrocarbon emission(BSHC) and ozone forming potential(BSO)3 were calculated and discussed with the changes of fuel, engine speed, load, fuel/air equivalence ratio, coolant temperature, and spark timing. As a result, exhaust emission was composed of mainly fuel composed of mainly fuel comp- onent and other olefin components of similar carbon number. The olefin components such as ethylene and propylene determine most of the ozone forming potential. The fraction of fuel component in total hydrocarbon emission was bigger with methane fuel than with LPG fuel. Also fuel fraction increased at high speed or high speed or high temperature of exhaust gas, and to lesser extent with high coolant temperature and retarded spark. However, the effect of equivalence ratio had different tendency according to fuels.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E1호
• /
• pp.25-33
• /
• 2001

This paper presents an overview of the UK Hydrocarbon Monitoring Network and summarises some of the lessons learnt from running and automated VOC monitoring network in th UK. The paper will describe the operation of the network and the Quality Control and Quality Assurance (QA/QC) procedures used to ensure that the data qality objectives are met. The provision of accurate measurements of ambient air pollutant concentrations is a valuable and high-profile service of Governments, assisting policy decisions and allowing members of the public to be well-informed. The need for such measurements has been increased in the UK by the National Air Quality Strategy and European Air Quality Directives, with the National Networks playing a central role in delivering the information. The Hydrocarbon Network provides measurements directly in support of monitoring requirements for benzene and 1,3-butadiene, and of 23 other hydrocarbon species important for their role in ozone and secondary particulate formation.

• 공업화학
• /
• 제9권4호
• /
• pp.523-528
• /
• 1998

본 연구에서는 고체전해질셀 내에서 작업전극으로 사용된 $V_2O_5$의 전기화학적 특성을 알아보기 위해 YSZ를 고체전해질로 사용하여 전기화학셀(1-Butene+$O_2$, $V_2O_5{\mid}YSZ{\mid}Ag$, $O_2$)을 구성하였다. 상대전극인 Ag는 소성에 따라 sintering이 일어나고 $3{\mu}m$ 이상의 기공을 갖는 구조를 얻었다. 작업전극은 소성조건에 따라 부분산화반응에 영향을 주는 (010)면이 발생되었다. $V_2O_5$의 1-부텐에 대한 주요생성물은 부타디엔이었고 SEP (solid electrolyte potentiometry) 기술을 이용하여 작업전극상에 흡착된 화학종의 화학포텐셜을 측정하였다. 가스조성에 따른 개로전위 (OCV; open circuit voltage)를 측정하여 표면 산소종에 혼합전위의 발생을 확인하였다.