• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.680-686
• /
• 2002

In deep-submicron (BSM) design, coupling effects between wires on the bus cause serious problems such as crosstalk delay, noise, and power consumption. Most of the previous works on bus encoding are targeted either to minimize tile power consumption on bus or to minimize the crosstalk delay, but not both. In this paper, we propose a new bus encoding algorithm that minimizes the power consumption on bus and eliminates the crosstalk delay simultaneously. We formulate and solve the problem by minimizing a weighted sum of the self transition and cross-coupled transition activities on bus From experiments using a set of benchmark designs. it is shown that the proposed encoding technique consumes at least 15% less power over the existing techniques, while completely eliminating the crosstalk delay.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.7
• /
• pp.10-16
• /
• 1999

This paper describes a low voltage swing bus driver using FCSR(Feedback Control Swing voltage Reduction) which can control bus swing voltage within a few hundred of mV. It is proposed to reduce power consumption in On-chip interface, especially for MDL(Merged DRAM Logic) architecture wihich has wide and large capacitance bus. FCSR operates on differential signal dual-line bus and on precharged bus with block controlling fuction. We modeled driver and bus to scale driver size automatically when bus environment is variant. We also modeled coupling capacitance noise(crosstalk) of neighborhood lines which operate on odd mode with parallel current source to analysis crosstalk effect in the victim-line according as voltage transition in the aggressor-line and environment in the victim-line. We built a test chip which was designed to swing 600mV in bus, shows 70Mhz operation at 3.3V, using Hyundai 0.8um CMOS technology. FCSR operate with 250Mhz at 3.3V by Hspice simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.471-472
• /
• 2010

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.346-354
• /
• 2018

In this study, the condition of the hazardous materials in the bus was monitored according to the ventilation mode of the air conditioning system during bus service. The bus was surveyed using the indoor air quality measurement method of public transportation vehicles within one year of delivery. We evaluate the $CO_2$ and $PM_{10}$, which are the controlled parameters in buses by the Ministry of Environment, and VOCs and HCHO, the non-controlled parameters. The $PM_{10}$ concentration increased due to outdoor air intake; however the $CO_2$ concentration was found to decrease. In addition, the concentration of VOCs and HCHO was found to decrease due to the forced ventilation system and the outdoor air intake. These results show that the concentration of the other materials except $PM_{10}$ can be changed due to the outside air concentration and forced ventilation system. Therefore, through indoor air quality characteristics of the bus according to air condition system are intended to be used as the basis of an operation manual.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.333.1-333
• /
• 2002

This paper suggests the noise reduction method of the engine cooling fan. It was estimated the fannoise contribution at the engine room and identified the noise source at the rotating fan by sound intensity method, first. And it has been developed the program for predicting the noise spectrum of axial flow fan. The radiated acoustic pressure is expressed the discrete frequency noise peaks at BPF and its harmonics and the line spectrum at the broad band by the noise generation mechanisms. In this paper it is shown that the comparison of the measuted and calculaed noise spectra of fn for the validation of the noise predictiong program. And this paper presents the characteristics of a fan noise due to modify the design parameters. Accordingly, it was obtained the design parameter values for noise reduction of fan.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.1-6
• /
• 2009

This paper presents new high speed architecture using DBI(Data Bus Inversion) in DRAM. The DBI is one of the general methods in the signaling circuits to decrease the known problems such as SSO and LSI. Many architectures have been proposed to reduce the number of transitions on the data bus. In this paper, the DBI, the Analog Majority Voter (AMV) circuit, the GIO control circuit and the SSO algorithm are newly proposed. The power consumption can he reduced with the help of direct GIO inversion method and the eye diagram of data can be increased to 40ps. Using proposed DBI scheme can produce almost stable SI of DQs against high speed operation. The DBI is fabricated in 90nm CMOS Technology.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.172-184
• /
• 2014

Economic growth with rising household income has put more vehicles on the roads worsening traffic congestion, road accidents, and air and noise pollution. This situation is further aggravated by the potential working population who choose to drive to work instead of taking public transportation. Public bus transport (PBT) plays an important role in alleviating these problems. PBT is underutilized in Malaysia, and there is an opportunity to increase ridership without substantial investment. Therefore, this study was conducted to investigate the factors that influence the use of PBT in Malaysia. The data were collected using structured questionnaires from 400 respondents. The results of the analysis show that the twin factors consisting of perceived satisfaction of and perceived importance by users towards safety and comfort of facilities and services offered by PBT are significantly related to intention to use those services. The satisfaction of availability of season tickets, the importance of reliability of bus schedule and time table, and the importance of ticket pricing are also significant. By providing insights for both public bus operators and the government, this paper contributes to mitigate the underutilization of PBT in Malaysia and the consequences of putting more vehicles on the roads. From the theory perspective, this paper also contributes by extending the theory of reasoned-action to transportation studies.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.7
• /
• pp.267-274
• /
• 2001

This paper introduces experimental results related to the vibration ride conditions that a korean male subject experienced in the nationwide railway trains and the express bus. Two types of railway train's Saemaulho and Mugunghwaho. and the express bus were chosen to measure how much the whole-body vibrations on the contact area of the back , hip and feet are exposed to the subject. Measured vibration signals were analysed to assess the rife conditions quantitatively and qualitatively. Analysed results are illustrated to unveil how much typical public transportation system in Korea expose whole-body vibration to passengers. Futhermore, the performance evaluation of their seats were carried out to examine their effectiveness in reducing vibration exposure to passengers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1100-1104
• /
• 2001

This paper introduces experimental results related to the vibration ride conditions that a korean male subject experienced in the railway trains and the express bus. Two types of railway train's, Samaulho and Mugunghwaho, and the express bus were chosen to measure how much the whole-body vibrations of the back, hip and feet are exposes to the subject. Measured vibration signals were analysed to assess the ride conditions quantitatively and qualitatively. Analysed results are illustrated to see how much typical public transportation systems in korea expose vibration to passengers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.279-284
• /
• 2002

In this study, it has been developed the program for predicting the noise spectrum of axial flow fan. The radiated acoustic pressure is expressed the discrete frequency noise peaks at BPF(Blade passage frequency) and its harmonics by Wu's method and the line spectrum at the broad band by Wright's method. And this paper presents the characteristics of a fan noise due to modify the design parameters. Accordingly, it is obtained the design parameter values for noise reduction of fan.