• 한국안전학회지
• /
• 제8권4호
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• 천문학회보
• /
• 제46권2호
• /
• pp.35.1-35.1
• /
• 2021

Variability in young stellar objects (YSOs) can be caused by various time-dependent phenomena associated with star formation, including accretion rates, geometric changes in the circumstellar disks, stochastic hydromagnetic interactions between stellar surfaces and inner disk edges, reconnections within the stellar magnetosphere, and hot/cold spots on stellar surfaces. Among these YSO variability phenomena, bursts of accretion, which are the most remarkable variability, usually occur sporadically, making it challenging to catch the bursting moments observationally. However, the burst accretion process significantly affects the chemical conditions of the disk and envelope of a YSO, which can be used as a prominent tracer of episodic accretion. I will introduce our ensemble studies of YSO variability at mid-IR and submillimeter and also cover the ALMA observations of several YSOs in the burst accretion phase, especially in the view of chemistry.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2253-2261
• /
• 2002

Recently the hydroforming technology has drawn a lot of attention because of its capability to produce high quality and light weight parts. In the present study, the tube expansion - one of the simplest hydroforming processes, has been investigated in order to understand fundamental phenomena such as deformation characteristics and effect of process parameters. As a result, the most important process parameters, which determine the state of stress at the expanded zone, were found to be pressure and die displacement. If the stress becomes equi-axial tension at the zone, necking occurs at some distance from the weld line and develops into a crack along the axial direction. Some aspects of mechanical property measurements as well as distributions of hardness and microstructure are also discussed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.753-758
• /
• 1987

The purpose of ocean thermal energy conversion (OTEC) plant control is to provide stable power efficiently by appropriately regulating the seawater flow rates and the working fluid flow rate under conditions of continually changing seawater temperatures. This paper describes digital control of working fluid flow rate based on an adaptive control theory for the "Imari 2" OTEC plant at Saga University. Provisions have been made for linkage between the software of the adaptive control theory and the hardware of the OTEC plant. In implementing the working fluid flow rate control, if persistency of excitation conditions are lost, the algorithm of identification often exhibits bursting phenomena. To avoid this difficulty, the stopping-and-starting rule for identification was derived and was used for the working fluid flow rate control. Satisfactory control performance was then obtained by using this digital control system.ol system.

• 한국지열·수열에너지학회논문집
• /
• 제8권3호
• /
• pp.19-28
• /
• 2012

In a heat only boiler system of a steam power plant, outdoor air required for combustion is made to pass through indoor space for increasing the boiler efficiency. Due to heat generated by various equipments, temperature of the air that enters the boiler will increase resulting in combustion efficiency. If the outdoor air temperature is low, however, this will cause freezing and bursting of pipes which are filled with water. It is especially fatal to small diameter pipes and pipes connected to measuring instruments. The purpose of this study is find operation and outdoor conditions where this phenomena can happen and also establish preventive measures to avoid this problem.

• 대한토목학회논문집
• /
• 제34권5호
• /
• pp.1435-1442
• /
• 2014

본 연구에서는 OpenFOAM에서 제공하는 소스코드를 이용하여 매끄러운 하상의 직사각형 개수로 흐름에 대해 수치모의를 수행하였다. 난류 해석을 위해 LES를 수행하였는데, 비등방성 잔여 응력항을 모델링하기 위해서 Germano et al. (1991)이 제시한 Dynamic Subgrid-scale 모형을 이용하였다. 조직구조를 분석하기 위하여 Lu and Willmarth (1973)가 제시한 uw 사분면기법을 이용하여 순간레이놀즈 응력이 레이놀즈 응력에 미치는 영향을 기여율과 시간비로 나누어 분석하였다. LES 모의 결과를 토대로 기존 실험 및 DNS 모의 결과와 비교하고 분석하였다. 매끈한 하상을 가진 개수로 흐름에서 완충층 이후의 구간에서 분출현상이 쓸기현상에 비해 레이놀즈 응력의 양의 생성에 기여하는 바가 크지만, 분출현상에 비해 쓸기현상의 발생빈도가 큰 것으로 확인되었다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.39-47
• /
• 2003

암반파열 현상은 암반 내에 축적된 변형에너지의 급작스러운 방출로 인해 발생한다. 심부 광산에서는 이런 현상이 자주 발생하여 주요한 재해 중 하나로 다루어졌으나, 터널에서는 극히 드물게 나타나는 현상이었다. 따라서 터널 내암반파열 현상에 대한 국내역사는 짧은 편이며, 정보도 제한적이어서 그와 관련된 연구는 거의 없는 실정이었다. 그러나 최근에는 터널의 심도가 깊어짐에 따라 터널내 암반파열 현상이 종종 보고되고 있어 터널의 안정성 문제뿐만 아니라 시공 중 재해 측면에서 볼 때 이에 대한 연구가 절실히 필요할 것으로 사료된다. 본 연구에서는 TBM 터널에서 취득한 암반파열현상 관련 자료의 분석을 통하여 그 현상을 포괄적으로 이해하는 방법을 제시하고자 하였다. 암반파열이 발생한 본 연구 터널의 현장자료 분석결과에 의하면, 대부분의 암반파열은 터널의 막장과 운전석 내에서 주로 발생하였으며, 일부 구간에서는 파열현상이 20일 이상 지속되기도 하였다. 또한 본 터널에서의 암반파열은 터널막장, 터널측벽 및 터널천장 등 터널의 모든 주변에서 발생하였고, 그 파열 깊이는 대부분 100cm 이하인 것으로 조사되었다. 본 연구에서는 이러한 암반파열 자료를 이용하여 암반파열 가능성을 취성도와 일축압축강도를 이용해 평가할 수 있도록 새로운 규준을 제시하였으며, RMR, 굴착공법, 굴착속도 및 터널심도 등이 서로 연관되어 암반파열 현상에 큰 영향을 준다고 판단된다.

• 한국해양학회지
• /
• 제18권2호
• /
• pp.104-110
• /
• 1983

海洋 亂流境界層內 亂流運動量輸送의 斷續性 現象에 對하여 그 本質을 把握 하고 流體力學的 인 의미를 규명하기 위한 영구를 기원했다.또한 단속성 현상과 작비현상의 상호관계도 아울러 연구했다. 본 연구를 통해 난류경계층내에서도 중간층에 속하는 z/h=0.067층에서는 단속성의 크기가 평균난류운동량 수송의 408배의 달하고 상부층 즉 z/h=0.1층에서는 270배에 달함이 밝혀져,이제까지 보고되었던 Gordon(1974)이나 Heathersaw(1974)의 30배의 월등히 크다는 것이 새로운 사실이다. 일부 학자들은 단속성현상을 자기현상의 반영 또는 자기의 유통계의 부딪혀 나타나는 현상이라고 해석한바 있으나 (Gordon,1974; Heathersaw,1974),본 연구에서 밝혀진바에 의하면,이는 마찰 Reynolds 수가>$10^{5}$인 실제해양의 난류경계층내 난류운동의 특징이라는 사실이다.