• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.15-20
• /
• 2004

Characteristics of turbulent lifted flames in coflow jet have been investigated by varying initial temperature through the heating of coflow air. In the turbulent regime, liftoff height increases linearly with fuel jet velocity and decreases nonlinearly as the coflow temperature increases. This can be attributed to the increase of turbulent propagation speed, which is strongly related to laminar burning velocity. Dimensionless liftoff heights are correlated well with dimensionless jet velocity, which are scaled with parameters determining local flow velocity and turbulent propagation speed. This implies that the turbulent lifted flames are stabilized by balance mechanism between local turbulent burning velocity and flow velocity. Blowout velocity can be obtained from the ratio of mixing time to chemical time. Comparing to previous researches, thermal diffusivity should be evaluated from the initial temperature instead of adiabatic flame temperature.

• 한국연소학회지
• /
• 제9권1호
• /
• pp.32-38
• /
• 2004

Characteristics of turbulent lifted flames in coflow jet have been investigated by varying initial temperature through the heating coflow air. In the turbulent regime, liftoff height increases linearly with fuel jet velocity and decreases nonlinearly as the coflow temperature increases. This can be attributed to the increase of turbulent propagation speed, which is strongly related to laminar burning velocity. Dimensionless liftoff heights are correlated well with dimensionless jet velocity, which are scaled with parameters determining local flow velocity and turbulent propagation speed. This implies that the turbulent lifted flames are stabilized by balance mechanism between local turbulent burning velocity and flow velocity. Blowout velocity can be obtained from the ratio of mixing time to chemical time. Comparing to previous researches, thermal diffusivity should be evaluated from the initial temperature instead of adiabatic flame temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.124-127
• /
• 2003

Sewage sludge and clay used as raw materials in the study. Green aggregates contain different contents by dried weight of the sewage sludge, up to 80 percent is manufactured and burning conditions of soak temperature, soak time and rate of temperature increase. influence of burning condition and mixing ratio on specific gravity of burned aggregate are discussed. The appropriate burning condition to all aggregates is evaluated. Aggregates result form the thermal treatment get specific gravity under 0.8, water absorption fewer than 7.5 percent, and aggregate crushing value from 28 to 53. As the result, aggregates can be available as the lightweight aggregate for non-structural concrete.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.325-334
• /
• 2004

Computational experiments on fundamental un stretched laminar burning velocities and flame response to stretch (represented by the Markstein number) of hydrogen-air flames at high temperatures and pressures were conducted in order to understand the dynamics of the flames including hydrogen as an attractive energy carrier in conditions encountered in practical applications such as internal combustion engines. Outwardly propagating spherical premixed flames were considered for a fuel-equivalence ratio of 0.6, pressures of 5 to 50 atm, and temperatures of 298 to 1000 K. For these conditions, ratios of unstretched-to-stretched laminar burning velocities varied linearly with flame stretch (represented by the Karlovitz number), similar to the flames at normal temperature and normal to moderately elevated pressures, implying that the "local conditions" hypothesis can be extended to the practical conditions. Increasing temperatures tended to reduce tendencies toward preferential-diffusion instability behavior (increasing the Markstein number) whereas increasing pressures tended to increase tendencies toward preferential-diffusion instability behavior (decreasing the Markstein number).

• 에너지공학
• /
• 제20권2호
• /
• pp.163-169
• /
• 2011

기관의 구조를 변경하지 않는 상태에서 RM50의 사용 가능성에 대한 결정을 하기 위해 수치해석을 수행하였다. 열발생률을 비교한 결과 기관회전수가 증가할수록 각 연료간의 차이가 감소하였으며, RM50, 가솔린의 순서로 열발생률의 최대치가 높음을 알 수 있었다. 이는 연료의 연소속도의 순서와 동일하였다. 난류연소속도는 RM50이 가장 높으며 난류강도의 곡선은 난류 연소속도 곡선과 비슷한 경향을 보이고 있으며 RM50이 다른 연료에 비해 연소속도가 빠르고 소염거리가 짧으므로 연소실의 온도가 높아 NO 배출물을 증가시키는 요인이 되지만 NO의 화학적 반응 동력학의 영향에 의해 결과적으로 NO 배출물을 감소시킨다. 따라서 RM50 연료의 사용 가능성을 예측할 때는 연료의 저위발열량에 의한 실린더내 온도뿐 만 아니라 연소속도를 포함한 연소특성까지 고려할 필요가 있다.

• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.47-58
• /
• 2014

The characteristics of flame shape, laminar burning velocity, emissions and heat flux of stagnation point in premixed impinging jet flame of syngas fuel with 10% hydrogen content were experimentally investigated. Also, the adiabatic temperature and burning velocity are calculated by Chemkin package with USC-II mechanism. The equivalence ratios(0.8~5.0) and dimensionless separation distance(2.0~5.0) with fixed Reynolds number(1800) are main parameters in this work. Different flame shapes and colors were observed for different impingement conditions. The experimental results of burning velocity by flame surface area have a consistent with previous works and numerical simulation of this work. The inner flame length could be predicted with the ratio of mixture velocity and burning velocity from a simple formulation by the laminar burning velocity definition. It has been observed that the heat fluxes at stagnation point are directly affected by the flame shape including the separation distance. The emission results in impinging flame of syngas fuel show that the characteristics of $NO_x$ emission traced well with adiabatic temperature trend and CO emission due to fuel rich condition increased continuously with respect to the equivalence ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.104.1-104.1
• /
• 2010

We investigated combustion characteristics of wood pellets in a combustion equipment with adjusting amount of flue gas. Maximum temperature in a combustion chamber was $850^{\circ}C$. Higher heating Value of a domestic wood pellet tested is 19.1 MJ/kg and water content was 8.3%. Amount of flue gas causes big effect on burning characteristics in $450{\sim}600^{\circ}C$. Wood pellet does not burn in low temperature atmosphere less than $450^{\circ}C$ and low flue gas flow rate. We made burning the pellet that is made in Korea, USA, Chile and Canada. Color of foreign pellets are bright brown and they made by mainly sawdust. Korean pellet is a dark brown color because it contains bark. There are some differences in the result of elementary analysis and technical analysis. According to the result of burning experiment, burning times of each countries's pellet are similar.

• Journal of Preventive Medicine and Public Health
• /
• 제7권2호
• /
• pp.373-375
• /
• 1974

일산화(一酸化) 탄소(炭素)에 대한 피해와 대기오염(大氣汚染) 기준을 아황산(亞黃酸)까스를 기준으로 한다는 데의 관심을 가지고 가정에서 많이 사용하고 인는 연탄을 중심으로 관찰한 결과 CO는 연소온도와 비례하나 $SO_2$는 비례하지 않으며 일단 발생된 CO는 적어도 24시간(時間) 이내에는 변화가 거의 없으며 비교적 장시간 유지한다. $SO_2$는 대기중에서 곧 변화를 일으켜 ($H_{2}SO_{4}$로 전환) 30분이내에 극소량으로 되므로 대기중의 황화물 측정은 $SO_2$보다 유황자체나 $H_{2}SO_{4}$를 측정함이 더욱 효과적이라 하겠다.

• 한국연초학회지
• /
• 제30권2호
• /
• pp.103-108
• /
• 2008

The application of RECON(Reconstituted tobacco sheet) and the ventilation technology has been considered as very useful methods for controlling the tar and nicotine deliveries in modern blended tobacco. In this study, the effects of RECON contents in simulated blends on the smoke delivery and burning temperature were evaluated in three different ventilation levels. The ventilation showed a great influence on the burning temperature and smoke deliveries. The nicotine, tar and CO deliveries was greatly reduced by the ventilation. The amount of RECON showed the minor impacts on the smoke delivery. In high ventilation level such as 85 % ventilation, there was no distinct change in smoke deliveries by the amount of RECON.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.83-87
• /
• 2000

Combustion characteristics of immobilized benzene and toluene in sands were studied. Experiments were performed by burning benzene and toluene immobilized on sands(particle size 0.1~0.5mm) to measure combustion rate and combustion temperature. The longer time from ignition to extinguishment was resulted from the larger particle size exhibited the higher mass burning rate. Of aromatic compounds tested the relative magnitude of facilitation of combustion was benzene and toluene. Combustion temperature of benzene and toluene without regard to the types of benzene and toluene was not increased with smaller sand. However, with larger sands, combustion temperature of benzene and toluene were increased by 50~$100^{\circ}C$ and the highest combustion temperature was obtained with larger sands.