• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.107-113
• /
• 2024

Scheduling of semiconductor test facilities has been crucial since effective scheduling contributes to the profits of semiconductor enterprises and enhances the quality of semiconductor products. This study aims to solve the scheduling problems for the wafer burn-in test facilities of the semiconductor back-end process by utilizing simulation and deep reinforcement learning-based methods. To solve the scheduling problem considered in this study. we propose novel state, action, and reward designs based on the Markov decision process. Furthermore, a neural network is trained by employing the recent RL-based method, named proximal policy optimization. Experimental results showed that the proposed method outperformed traditional heuristic-based scheduling techniques, achieving a higher due date compliance rate of jobs in terms of total job completion time.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.77-81
• /
• 2001

Burn-in is a test procedure to find and eliminate the inherent initial failure of a product during or at the final stage of production process. Software testing is the validation and verification process which is used to cut off the faults from a software. The two have the common function and objective of "debugging". This article summarizes some significant models on the optimal hardware and software burn-in time, and provides the relevant paper lists. The need for the development of the unified burn-in policy of a hardware-software system is addressed.addressed.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.183-188
• /
• 2017

Background: Recommendations have been proposed for minimum aerobic fitness among firefighters but it is unclear if those criteria relate to performance on the fireground. Less fit individuals fatigue more quickly than fit individuals when working at comparable intensity and may have gait changes, increasing risk of falls. We evaluated the effect of fatigue during a live burn evolution on gait parameters and functional balance comparing them to aerobic fitness levels. Methods: A total of 24 firefighters had gait and balance tested before and after a live burn evolution. Data were stratified by aerobic fitness of greater/less than 14 metabolic equivalents (METs). Results: Analysis of gait cycles measurements before and after the live burn evolution revealed that single leg stance, cycle, and swing time decreased (p < 0.05) but there were no differences in the other measures. There were no differences in time to complete the functional balance test, or errors committed before or after a live burn evolution. When firefighters were sorted by fitness level of 14 METs, there were no differences for errors or time before or after the live burn evolution. Balance data were analyzed using a linear regression. Individuals with lower fitness levels required more time to complete the test. Conclusion: A 14-MET criterion failed to distinguish gait or balance characteristics in this group. However, less fit firefighters did require more time to complete the balance test (p = 0.003). Aerobic fitness alone does not predict gait changes among firefighters following a live burn evolution but does appear to influence functional balance.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.290-296
• /
• 2016

This study was conducted in order to examine the effect of burn damage and the resultant anti-corrosion performance. The breakdown and defect of the paint film caused by burn damage are considered to affect not only the macroscopic appearance but also the adhesive force and the anti-corrosion performance of the paint film. The material of the paint film was epoxy paint that is used most widely for heavy-duty coating, and in order to induce burn damage, heat treatment with a torch was applied to the other side of the paint film. Surface and chemical structure changes according to aging were analyzed using FE-SEM and infrared absorption spectroscopy, and variation in the anti-corrosion performance was analyzed through the AC impedance test.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.602-613
• /
• 2015

As one of the mission payloads to be verified through the cube satellite mission of Cube Laboratory for Space Technology Experimental Project (STEP Cube Lab), we developed a hinge driving separation nut-type holding and releasing mechanism. The mechanism offers advantages, such as a large holding capacity and negligible induced shock, although its activation principle is based on a nylon cable cutting mechanism triggered by a nichrome burn wire generally used for cube satellite applications for the purpose of holding and releasing onboard appendages owing to its simplicity and low cost. The basic characteristics of the mechanism have been measured through a release function test, static load test under qualification temperature limits, and shock measurement test. In addition, the structural safety and operational functionality of the mechanism module under launch and on-orbit environments have been successfully demonstrated through a vibration test and thermal vacuum test.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.187-191
• /
• 1999

Burns can be caused by fire, chemicals, heated object and fluids. Distinguishing a minor burn from a more serious burn involves determining the degree of damage to the tissues of the body. Algin is known as natural polymer marine plants, we prepared the official burn ointment which is made by Algin. This burn ointment was covered on the skin wound of artificial burned and their effect of healing was investigated by the evaluation of histological and hematological change as a function of time. The result of rats test showed that burn ointments made from Algin was effective in formation of the new tissue and reduction of inflammation.

• 한국환경보건학회지
• /
• 제25권3호
• /
• pp.58-63
• /
• 1999

Biodegradable films were prepared by solution blend method in the weight ratio of chitosan for the purpose of useful biomaterials. The possibility of biomaterials prepared from natural polymer as a skin substitute was evaluated by measuring biocompatibility. These films were inserts in the back of rat and their biodegradability was investigated by the film weight and hematology as a function of time for the biotransformation. The result of rat test showed that medium, high viscosity chitosan induced some suspects of inbiocompatibility in the tissue by goreign body reaction 48 and 72 hours after implantation. Also, we prepared the official burn ointment which is made by low viscosity chitosan. This burn ointment was covered on the skin wound of artificial burn and their effect of healing was investigated by the evaluation of the naked eye and hematological change as a function of time. The result of rats test showed that burn ointments made from chitosan was effective reductio of inflammation than negative group.

• 가정간호학회지
• /
• 제30권2호
• /
• pp.194-201
• /
• 2023

Purpose: Post-burn pruritus is one of the most prevalent complications experienced by burn patients. Though medications are prescribed for pruritus, managing this condition can prove challenging. The aim of this research was to develop and disseminate non-pharmacological self-management educational resources, and subsequently evaluate the effectiveness of implementing a percussion therapy approach. Methods: A one-group pretest-posttest design was employed to evaluate the effect of percussion therapy on one hundred patients, all of whom had suffered deep second-degree burns and undergone skin graft surgery. Variables such as the severity of pruritus, distress caused by pruritus, and satisfaction with pruritus treatment were scrutinized. A paired t-test was conducted to compare these variables before and after the intervention. Results: The majority of participants were diagnosed with third-degree burns, and the average Total Body Surface Area (TBSA) affected was 25.2%. Post-test results revealed a marked reduction in both severity and distress caused by pruritus. The intervention led to significant decreases in average severity and pain due to itchiness, and an increase in the satisfaction level following the application of percussion therapy. Conclusions: The implementation of the percussion was identified as effective in diminishing post-burn pruritus, alleviating pruritus-associated pain, and enhancing satisfaction with pruritus treatment. The percussion approach presents itself as a non-invasive, non-pharmacological strategy for managing pruritus in burn patients.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.200-205
• /
• 2010

고온고압, 장시간 연소조건하에서 일정한 추력을 유지하는 로켓 추진기관 개발을 위해 W/$Y_2O_3$ 노즐목 삽입재를 평가하였다. 연소시간 증가에 따른 내열성능 변화를 검토하였으며, 비삭마 소재로 범용되고 있는 CIT의 내열성능과 비교하였다. 연소시간이 증가함에 따라 삭마율은 감소하는 경향을 보였으며, W/$Y_2O_3$의 삭마율은 CIT의 약 55 %이었다. 노즐목 삽입재의 육안검사와 미세조직검사에서 연소시간의 증가로 인한 특이 현상은 발견되지 않았으며, 진공 열처리는 균열 방지에 효과가 있음을 확인하였다.

• Journal of Veterinary Science
• /
• 제22권1호
• /
• pp.9.1-9.11
• /
• 2021

Background: Scalding burn injuries can occur in everyday life but occur more frequently in young children. Therefore, it is important to develop more effective burn treatments. Objectives: This study examined the effects of bee venom (BV) stimulation on scalding burn injury-induced nociception in mice as a new treatment for burn pain. Methods: To develop a burn injury model, the right hind paw was immersed temporarily in hot water (65℃, 3 seconds). Immediately after the burn, BV (0.01, 0.02, or 0.1 mg/kg) was injected subcutaneously into the ipsilateral knee area once daily for 14 days. A von Frey test was performed to assess the nociceptive response, and the altered walking parameters were evaluated using an automated gait analysis system. In addition, the peripheral and central expression changes in substance P (Sub P) were measured in the dorsal root ganglion and spinal cord by immunofluorescence. Results: Repeated BV treatment at the 2 higher doses used in this study (0.02 and 0.1 mg/kg) alleviated the pain responses remarkably and recovered the gait performances to the level of acetaminophen (200 mg/kg, intraperitoneal, once daily), which used as the positive control group. Moreover, BV stimulation had an inhibitory effect on the increased expression of Sub P in the peripheral and central nervous systems by a burn injury. Conclusions: These results suggest that a peripheral BV treatment may have positive potency in treating burn-induced pain.