• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.57-67
• /
• 2003

Response analysis of buried pipeline subjected to permanent ground deformation(PGD) due to liquefaction is mainly executed by use of numerical analysis or semi-analytical relationship, When applying these methods, so called interfacial pipelineㆍsoil interaction force plays an dominant part. Currently used interaction force is mode up of indispensable mechanical and physical components for the response analysis of buried pipeline. However, it has somewhat limited applicability to the liquefied region since it is based on the experimental results for the non-liquefied region. Therefore, in this study, improved type of pipelineㆍsoil interaction force is proposed based on the existing interaction force and experimental research accomplishments. Above all, proposed interaction force includes various patterns of PGD or spatial distributions of interaction force caused by the decrease of soil stiffness. Through the comparison of numerical results using the proposed and the existing interaction force, relative influences of interaction force on the response of pipeline are evaluated and noticeable considerations in the application of semi-analytical relationship are discussed. Moreover, analyses due to the change of pipe thickness and burial depth are performed.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.435-442
• /
• 2000

Although the mummies of Lee Myeong-Jung and his wife who were a member of the Moon family, were buried in similar sites in around 1560, the degree of decay of the dead bodies and antiquities between two people were quite different. This study was focused on the cause of-those differences in terms of engineering geology. Cranular soil found several metered depth around the study site has good drainage ability and such characteristic could be a factor of excellent conservation of dead body. From the physical characteristics of the lime-containing material that is considered to be a barrier from water and air, it was observed that the material around dead body of wife was more compact and denser than that of husband. Such results could be a clear evidence that the lime containing material around dead body of wife was excellent barrier for keeping away from water and air. To investigate those differences of physical characteristics and constituent materials between two lime-containing materials, minerals had to be identified from the two materials. It was revealed that lime-containing material around dead body of wife contains gypsum and more calcite, which could be the reason for better barrier preventing from water and air than those around husband.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.65-72
• /
• 2016

There are numerous factors that affect stress distribution in a buried pipe, such as the shape, size, and stiffness of the pipe, its burial depth, and the stiffness of the surrounding soil. In addition, the pipe can benefit from the soil arching effect to some extent, through which the overburden and surcharge pressure at the crown can be carried by the adjacent soil. As a result, the buried pipe needs to support only a portion of the load that is not transferred to the adjacent soil. This paper presents numerical efforts to investigate the stress distribution in the buried concrete pipe under various environmental conditions. To that end, a nonlinear elasto-plastic model for backfill materials was implemented into finite element software by a user-defined subroutine (user material, or UMAT) to more precisely analyze the soil behavior surrounding a buried concrete pipe subjected to surface loading. In addition, three different backfill materials with a native soil were selected to examine the material-specific stress distribution in pipe. The environmental conditions considering in this study the loading effect and void effects were investigated using finite element method. The simulation results provide information on how the pressures are redistributed, and how the buried concrete pipe behaves under various environmental conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1673-1678
• /
• 2015

This paper describes magnetic field on power cable in underground transmission systems. Based on specification which is being used in domestic power utility, magnetic field was analyzed in accordance with line arrangement, line burial depth and phase spacing. Magnetic field magnitude and its trend were understood in each circuit type such as double circuits, triple circuits and quadruple circuits of underground transmission systems. In addition, magnetic field was analyzed according to phase arrangement changing in each circuit. Finally, the proper phase arrangement configuration type was suggested by the evaluation of analysis result. Magnetic field was calculated by using Biot-Savart's law. According to the evaluated magnetic fields based on phase layout configuration in each circuit, it figured out that each of magnetic fields was different. As a result, this paper proposes a proper phase layout configuration for generating minimum magnetic field. It is evaluated that the phase layout configuration in each circuit proposed in this paper can be used at actual underground transmission systems.

• Earthquakes and Structures
• /
• v.24 no.1
• /
• pp.65-79
• /
• 2023

A simplified analytical solution for seismic response of tunnel cross section in horizontally layered ground subjected to oblique incidence of SH wave is deduced in this paper. The proposed analytical solution consists of two main steps: free-field response in layered field and tunnel response. The free field responses of the layered ground are obtained by one-dimensional finite element method in time domain. The tunnel lining is treated as a thick-wall cylinder to calculate the tunnel response, which subject to free field stress. The analytical solutions are verified by comparing with the dynamic numerical results of two-dimensional ground-lining interaction analysis under earthquake in some common situations, which have a good agreement. Then, the appropriate range of the proposed analytical solution is analyzed, considering the height of the layered ground, the wavelength and incident angle of SH wave. Finally, by using the analytical solutions, the effects of the ground material, burial depth of the tunnel, and lining thickness and the slippage effect at the ground-lining interface on the seismic response of tunnels are investigated. The proposed solution could serve as a useful tool for seismic analysis and design of tunnels in layered ground.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.476-476
• /
• 2023

해저면에 놓인 물체는 주변의 국소 흐름 변화에 의해 해저면 전단응력이 국부적으로 변화하는 과정에서 침식과 퇴적이 발생하게 되면서 해저면 지형의 변화에 의해 움직임이 발생한다. 이때 물체의 크기, 무게, 밀도와 형상에 따라 구름, 미끄러짐, 액상화 현상 또한 동반 될 수 있다. 본 연구에서는 해저면에 놓인 물체의 시간변화에 따른 매몰심 변화를 예측하고자 하였다. 물체는 원형 단면의 실린더 형태로 고려했다. 시간변화에 따른 매몰심 변화를 평형 매몰심으로의 접근속도에 관련된 인수와 매몰심 변화량으로 기본방적식을 구성하였고, 이를 유한 차분식으로 수립하였다. 최종 평형 매몰심 계산은 Friedrichs et al.(2016)의 경험식을 사용하였다. 앞선 연구에서 김효섭 등(2016)은 시간에 따른 세굴심 변화 모델 STEP-K를 제시한 바 있다. 시간변화에 따른 연직방향 실린더 주변에서의 국소세굴심을 예측하는 기법으로, 해저면에 놓인 수평방향 물체 주변의 매몰심 발달을 예측하기 위해 매몰 발생에 대한 시간의 척도를 새롭게 제안하였다. STEP-K에서 사용했던 KC수를 대신해 흐름-단주기 파랑 공조시의 해저면의 전단응력을 대표할 수 있는 대표전단응력을 사용할 수 있게 하였다. 보정계수를 통해 현장 또는 실험실 단위의 자료가 가용한 경우 식을 보정할 수 있다. 제안한 매몰심 예측기법은 Elmore et al.(2007)의 매몰실험 관측자료를 활용하여 보정하였다. 결과적으로 보정자료에 대한 시간에 따른 매몰심의 변화양상을 잘 재현하였으며, 향후 우리나라 해양환경 자료를 활용한 보정을 통해 적용성을 높일 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• v.38 no.1
• /
• pp.69-77
• /
• 2024

The development of shield-driven cross-river tunnels in China is witnessing a notable shift towards larger diameters, longer distances, and higher water pressures due to the more complex excavation environment. Complex geological formations, such as fault and karst cavities, pose significant construction risks. Real-time adjustment of shield tunneling parameters based on parameter prediction is the key to ensuring the safety and efficiency of shield tunneling. In this study, prediction models for the torque and thrust of the cutter plate of ultra-large diameter slurry shield TBMs is established based on integrated learning algorithms, by analyzing the real data of Heyan Road cross-river tunnel. The influence of geological complexities at the excavation face, substantial burial depth, and high water level on the slurry shield tunneling parameters are considered in the models. The results reveal that the predictive models established by applying Random Forest and AdaBoost algorithms exhibit strong agreement with actual data, which indicates that the good adaptability and predictive accuracy of these two models. The models proposed in this study can be applied in the real-time prediction and adaptive adjustment of the tunneling parameters for shield tunneling under complex geological conditions.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.300-311
• /
• 2019

An ROV trencher is a type of heavy-duty work class ROV equipped with high-pressure water jet tools for cutting into the sea floor and burying cables. This kind of trencher is mostly used for PLIB operations. This paper introduces the development of this kind of ROV trencher, which has a 698 kW power system, with a 250 kW hydraulic system and two 224 kW water jet systems. The project was launched in January 2014. After four years of design, manufacturing, and system integration, we carried out two sea trials near the Yeongilman port (about 20-30 m in depth) in Pohang to evaluate the system performance in November 2017 and August 2018. Through tests, we found that most of specifications were satisfied, including a maximum bury depth of 3 m, maximum bury speed of 2 km/h, and maximum forward speed of 1.54 m/s.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2017

Geographic Information System The geographic information system (GIS) has been limited to the government and some public sectors. Recently, the market has been diversified by combining with other areas such as mobile and CRM (Customer Relationship Management). The development direction of GIS technology in the 21st century is Web GIS, 3D GIS, mobile GIS, LBS, etc. as general technology for GIS application system development and spatial information service. In this study, we developed a new concept marking nail (a marking nail with built - in intelligent storage memory device) from the function of simple positioning of a marking nail related to a previously used underground item,, Burial depth, pipe thickness, piping material, management agency, contractor, contact, etc.) and store it in DB server, if necessary.Make it available in the right place. Through this research, it is possible to prevent and minimize various accidents caused by irregular excavation works, etc., and to provide information for establishing countermeasures related to sink holes. In order to provide systematic and reliable information on underground burial management, it was proposed to input information conveniently in the field, and the purpose was to reduce the incidence of buried underground pipes absolutely.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.311-318
• /
• 2019

We analyzed the preliminary survey data (2014-2016) of macrobenthic community biomass (n = 112) from the wind farm area located in the southern part of the west coast of Korea and compared this data with data from the entire west coast (n = 369; 2006-2008). Modal classes from frequency distributions were 6 times higher in the latter (5 vs. 32 g/㎡). The mean and median values of the latter were 1.3 and 1.7 times higher (mean, 20.7 vs. 27.8 g/㎡; median, 17.1 vs. 29.5 g/㎡), and the maximum value was 3.4 times higher. Mood's median test showed significant difference at p-value = 0.01. We estimated the biomass-to-depth relationships from each data set by using Akaike Information Criterion and regarded the non-overlap of the 95% confidence intervals as indicating significant difference. The biomass was different from a 10 m depth below, and 3 times higher in the west coast at around 20 m compared with the maximum depth of the wind farm area. A local event of catastrophic sedimentation ranging from 1 to 2 m was observed in the wind farm during winter surveys. This could be a probable source of the lower biomass, but information on biomass seasonality and a natural experimental approach seem to be needed for the conduct of further studies. This study is meaningful in that it provided the background to assess future changes by understanding the lower level of benthic productivity in the area. We expect this study will contribute to the preparation of measures that can remove or mitigate the source of the lower biomass and improve the productivity of fishery resources in the area.