• 디자인학연구
• /
• 제16권1호
• /
• pp.169-180
• /
• 2003

외식 산업에 있어 다국적 브랜드가 국내 외식사업을 잠식하고 있고 그러한 브랜드가 국내 소비자에게 인지도가 높아가고 있는 시점에서 패스트푸드도 브랜드화된 하나의 제품이라 보고 그 가치를 느끼게 하는 비쥬얼 아이덴티티를 중심으로 브랜드 인지도와 이미지 연상을 연구를 통하여 전개하고자 한다. 최근에 외식산업의 발달로 브랜드 아이덴티티에 의한 브랜드 이미지를 통해서 자산가치가 새로히 평가받고 있는 이때에 무엇보다도 여러가지 마케팅 포지셔닝이 다양한 패스트푸드업을 통해서 브랜드 연상(Brand Association)과 그 의미를 확인하는데 그 연구 목적이 있다. 서비스를 제공하는 음식의 제조와 판매가 분리된 조직적인 경영기법인 프랜차이징 시스템(Franchising System)으로 운영하는 특성을 갖고 있다. 이러한 경영전략은 소비자에게 자사 브랜드의 인지도와 충성도를 높이는 매우 중요한 포지셔닝(Positioning)으로 차지하고 있는 것이다. 또한 이미 발생된 브랜드 마크에 의한 색체와 도형 등 비쥬얼이미지(Visual Image)에 의한 연상(Association)이 어떻게 나타내고 있는가 연구함으로 국내 패스트푸드업의 프랜차이즈(Fran chise)의 활성화에 도움이 되고자 한다.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.37-48
• /
• 1991

Rice plants are subjected to various forces such as natural force of wind and mechanical force of cultivating machines. Rheological behavior of the rice stem can be expressed in terms of three variables : stress, relaxation and time. The objectives of this study are to examine stress relaxation, creep and recovery characteristics on the rice stem in case of axial and radial loading. Stress relaxation with time was studied on three levels of loading rate and on four levels of applied stress. The results were summarized as follows : 1. The hysterisis losses of the rice stem distinctly observed at the radial compression in comparison with axial compression. The hysterisis loss implied that the stem to absorbed energy without being deformed beyond the yield point. 2. Ageneralized Maxwell model consisting of three elements gave a good description of the relaxation behavior of the rice stem. Rate of loading was more significant on the observed relaxation behavior within the short relaxation time, but there were little influences of rate of loading on the relaxation time. 3. The stress relaxation intensity and the residual stress increased in magnitude as the applied stress increased, but the relaxation time was little affected by the applied stress. 4. The coefficients of the stress relaxation model showed much differences in the radial compression and the axial compression, especially the higher relaxation stress of the third element was observed in the radial compression. 5. The behaviors of rice stem in creep and recovery test also might be represented by a four element Burger's model. But the coefficients of the creep model were different from those of the recovery model. 6. The steady-state phenomena of creep appeared at the stress larger than 20 MPa in Samkang and 1.8 MPa in Whajin. 7. The elastic modulus of the stem showed the range from 40 to 60 MPa. It could be considered, as a result, the rice stems had viscoelastic properties.

• Journal of Biosystems Engineering
• /
• 제17권1호
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• 대한임상독성학회지
• /
• 제11권2호
• /
• pp.81-88
• /
• 2013

Purpose: The aim of this study is to investigate current status, indications, and complications of hyperbaric oxygen therapy. Methods: A retrospective investigation of patients who underwent hyperbaric oxygen therapy at a university medical center from September 2004 to August 2013 was conducted based on patients' medical records and results of an email survey for 99 emergency centers. Results: During the study period, a total of 233 patients underwent hyperbaric oxygen therapy. Indications for hyperbaric oxygen treatment of illness or injury were as follows: 1) 151 cases of acute carbon monoxide poisoning(65.4%), 2) flap wound management, including 42 cases(18.2%), 3) skin care transplanted, including 23 cases(10.4%), 4) Burger's disease, including 5 five cases(2.1%), respectively. Total application time$^*$ frequency was 1,088 and total time was 1,239 hours. Among 233 patients who underwent hyperbaric oxygen therapy, 32 patients(13.7%) had complications: 1) otalgia in 21 cases(9.0%), 2) mastoiditis?in six cases(2.6%), 3) hemotympanum in five cases(2.1%), respectively. There were only 8 emergency centers that currently had an operational hyperbaric oxygen chamber in 77 emergency centers(10.4%). Conclusion: Indications identified through this study showed difference from current indications worldwide. It seems necessary that physicians' perception regarding application of hyperbaric oxygen therapy for more indications be changed and improved. A hyperbaric chamber capable of providing respiratory assistance and intensive care is also needed. A good network for sharing treatment experiences and a specialized team for administration of hyperbaric oxygen therapy is also required.

• 한국어류학회지
• /
• 제25권4호
• /
• pp.227-233
• /
• 2013

태안반도 모항항의 암반조간대 조수웅덩이에서 2010년 1월부터 12월까지 매월 어류를 채집하여 고도에 따른 종조성분포를 분석하였다. 조사 기간 동안 채집된 어류는 3목 8과 14속 16종이었으며, 이 가운데 망둑어과의 점망둑(Chaenogobius annularis)이 34.6%로 우점하였고, 아우점종으로는 그물베도라치(Chaenogobius annularis)가 22.0%, 조피볼락 (Chaenogobius annularis)이 6.9%, 두줄망둑 (Chaenogobius annularis)이 6.8%순이었다. 그물베도라치는 고도에 관계없이 주거종으로 출현하였으며, 점망둑은 상부조간대에서 가장 우점하였고, 모든 조사 시기에 채집되었다. 주거종의 개체수는 일시주거종과 기회방문종보다 높았으며, 생체량은 주거종이 61.4%로 가장 높았으며, 일시주거종이 14.2%, 기회방문종이 24.4%였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권2호
• /
• pp.27-38
• /
• 1993

To investigate relationships between image guality and exposure dose, Chest X-ray films were evaluated for the following points:how much scattered radiation can affect reduction in image quality and can be permissible diagnostically? For this purpose using a test charts and Burger's phantoms. The visual evaluation of their X-ray films and the measurements of scattered radiation were carried out. The dose of scattered radiation ranging from 20 to 25% was found to be for nothing in any diagnostic obstacle. In this range, surface doses were low of 17, 21, and $25{\mu}Gy$ for The thickness of the chest of 15, 20 and 25 cm respectively. Comparison of these high voltage X-ray films with low voltage ones showed a surface dose rate of 1:11.7. Therefore, X-ray quality, photosensitive materials(film and screen) and grid should be selected very carefully for the purpose of reduction in exposure dose.

• Fisheries and Aquatic Sciences
• /
• 제25권5호
• /
• pp.276-286
• /
• 2022

This study is focused on the effect of phycobiliprotein extraction of Gracilaria on the quality of common carp burgers, and the application of nanoliposomes containing pigment in the improvement of its antimicrobial and antioxidant activity of burgers during refrigerated storage in 18 days. Burgers were incorporated with phycobiliprotein and liposomal phycobiliprotein (2.5% and 5% w/w), and their chemical and microbial changes in terms of pH, peroxide value (PV), thiobarbituric acid (TBA), total volatile basic nitrogen (TVB-N), total viable counts (TVC), psychrotrophic bacterial counts (PTC), and sensory characteristics were evaluated. Results presented a nanoliposome size of about 515.5 nm with capable encapsulation efficiency (83.98%). Our results showed non-encapsulated phycobiliprotein could delay the deterioration of common carp burgers, as a reduction in PV, TBA, and TVB-N, TVC, and PTC values in burgers treated with free and nano encapsulated phycobiliprotein. Moreover, the potential of phycobiliprotein was improved when it was encapsulated into chitosan coated liposomes. Burgers treated with 5% nanoliposomes displayed the lowest amount of lipid oxidation and microbial deterioration in comparison to others during storage. According to chemical, microbial and sensory evaluation, the shelf life of common carp burgers was increased in samples treated with encapsulated phycobiliprotein at 2.5% and 5%, as compared to the control (p ≤ 0.05).

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4431-4440
• /
• 2022

An advanced nuclear reactor based on molten salts including a molten salt reactor and pyroprocessing needs a sensitive monitoring system suitable for operation in harsh environments with limited access. Multi-element detection is challenging with the conventional technologies that are compatible with the in-situ operation; hence laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential alternative. However, limited precision is a chronic problem with LIBS. We increased the precision of LIBS under high temperature by protecting optics using a gas protective layer and correcting for shotto-shot variance and lens-to-sample distance using a laser-induced acoustic signal. This study investigates cerium as a surrogate for uranium and corrosion products for simulating corrosive environments in LiCl-KCl. While the un-corrected limit of detection (LOD) range is 425-513 ppm, the acoustic-corrected LOD range is 360-397 ppm. The typical cerium concentrations in pyroprocessing are about two orders of magnitude higher than the LOD found in this study. A LIBS monitoring system that adopts these methods could have a significant impact on the ability to monitor and provide early detection of the transient behavior of salt composition in advanced molten salt-based nuclear reactors.

• 농업과학연구
• /
• 제14권1호
• /
• pp.98-133
• /
• 1987

The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.

• 농업과학연구
• /
• 제22권1호
• /
• pp.1-10
• /
• 1995

기계화농업에서 농작물은 재배관리, 수확 및 가공과정에서 기계와 접촉하면서 기계로부터 순간적인 하중 및 지속적으로 받는 하중과 같은 여러 종류의 하중을 받아 변형되거나 파괴로 손상되는 등의 결과가 발생한다. 즉 기계작업 과정에서 작물은 파괴도 일어날 수 있으므로 작물의 물성에 따라 기계가 적응하면서 작업이 수행되어야 질적인 작업능율을 높일 수 있게 된다. 본 연구는 재배 및 수확과정에서 기계로부터 받는 벼 줄기의 역학적 특성의 구명을 위하여 크리이프 시험장치를 설계 제작하여 컴퓨터 측정장치를 구성, Burger모형(模型)에 의하여 수확시기에 측방향(側方向)의 압축하중 및 휨하중을 받는 벼 줄기의 크리이프 특성(特性)을 측정(測定) 분석(分析)하였다. 결과를 요약(要約)하면 다음과 같다. 1. 크리이프 거동은 4요소 Burger모형(模型)에 의하여 벼줄기의 크리이프거동을 정확히 예측(豫測)할 수 있었으며, 예측한 결과는 실측치에 거의 일치하였다. 2. 압축하중의 크기가 증가함에 따라 크리이프 변형량은 증가하는 경향이었는데, 25N 이하의 낮은 하중에서 정상상태 크리이프거동을 하였고, 30N 이상의 높은 하중에서 대수적 크리이프거동을 하였다. 3. 작용하중에 따른 크리이프거동을 나타내는 모형의 계수를 구하였는데 순간탄성계수 $E_0$ 및 지연시간 ${\tau}_K$는 작용하중의 증가에 따라 증가하였고, 지연탄성계수 $E_r$ 및 점성계수 ${\eta}_v$는 작용하중 증가에 따라 감소하는 점탄성(粘彈性) 재료(材料)임을 확인할 수 있었다. 4. 측방향 압축 하중이 25.0 N 이상 작용할 때 줄기 중부 및 상부에서 정상상태(定常狀態) 크리이프가 일어나, 하중의 작용시 줄기 부위(部位)에 따른 저항력은 하부(下部)에서 가장 컸고, 중부(中部)에서 가장 작게 나타나 파손 가능성이 높은 것으로 판단된다. 5. 압축하중 및 휨하중의 작용에 의한 줄기 부위에 따른 크리이프변형은 줄기 중부(中部)에서 가장 크게 일어났고, 하부(下部)에서 가장 작게 일어나 중부의 저항력이 가장 낮게 나타났다.