• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.13-30
• /
• 2011

This study compared Pottery, Hwaecheongware, Buncheongware and Whiteware pieces excavated in Hakbong-ri of Chungnam analytically by observing their refined structures and estimating their firing temperature. As a result, base soil components of the specimens were mostly similar to those of typical Buncheongware, but the content of the fluxing agent was rather high, and it seemed that the Whiteware had been made with fairly different components from those of other sherds. Although the glaze showed less difference than base soil in general, the content of the glaze changed according to the decorating methods of Buncheongware. Based on the SEM-EDS analysis, it was found that the base soil components of the ceramics seemingly rather different were actually different and the analysis on the fine crystals of the base soil, the anorthite in the glaze and crystals in the ironing part, and the components and contents of white earth showed there were some noticeable points in the process of making each of the sherds. In the refiring experiment to estimate the firing temperature, mostly similar results were gained as $1150^{\circ}C$ to $1200^{\circ}C$ for pottery, $1100^{\circ}C$ to $1150^{\circ}C$ for Hwaecheongware, and $1100^{\circ}C$ to $1200^{\circ}C$ for iron-brown Buncheongware however, the results imply good quality Whiteware was burnt at above $1300^{\circ}C$ while bad quality Whiteware was burnt at a temperature far lower than that. Thus, there was clear difference between Whiteware sherds and other kinds of sherds.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.171-181
• /
• 2012

The demand characteristics of the conventional 12 kinds of epoxy resins which have been used for restoration of the ceramic relics were investigated to provide standards of the effective materials in this study. The result of durability analysis showed that a liquid type is more effective in ceramic relics (low damage, high strength), and a paste type is more effective in earthenware relics (high damage, low strength). The result of workability analysis appears that the liquid type is higher than the paste type, and a slow curing type is higher than a fast curing type in surface hardness. Therefore, in the case of the liquid type which is hard to reprocess due to high surface hardness, it is necessary to conduct a study on improving physical properties by adding filler. The result of the gloss analysis on epoxy resins showed that the liquid type (colorless) has higher gloss than the paste type, and the slow curing type has higher gloss than the fast curing type in liquid types. CDK-520A/520B and Araldite SV 427-2/HV 427-1 showed the most similar gloss to $700^{\circ}C$ earthenware, Devcon 5 minute, EPO-TEK 301-2, and Quik Wood showed the most similar gloss to celadon and whiteware, Quik Wood, EPO-TEK 301-2, and Devcon 5 minute showed the most similar gloss to buncheongware. It is necessary for conservator to decide the range of the restoration surface by predicting the increase and decrease of the restoration surface because most of the epoxy resins caused the volume change in curing process.