• Title/Summary/Keyword: Bulk samples

Search Result 528, Processing Time 0.033 seconds

Effect on quanti-quality milk and mozzarella cheese characteristics with further increasing the level of dried stoned olive pomace in diet for lactating buffalo

  • Taticchi, A.;Bartocci, S.;Servili, M.;Di Giovanni, S.;Pauselli, M.;Mourvaki, E.;Zilio, D. Meo;Terramoccia, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.30 no.11
    • /
    • pp.1605-1611
    • /
    • 2017
  • Objective: Following a previous report, an experiment was conducted to determine the effect of increasing level of dried stoned olives pomaces (DSOP) in the diet of lactating buffaloes on milk and mozzarella cheese yield and characteristics. Methods: Sixteen pluriparous buffaloes distributed into two groups were fed an isoenergetic (0.9 milk forage unit/kg) and isoprotein (149 g/kg dry matter [DM] of crude protein) diet, with or without DSOP. Each animal received 17 kg DM/d. Samples of forages and concentrates were weekly collected and used for duplicate chemical analyses. Individual milk samples from each control were analyzed for chemical and coagulating parameters and daily production of mozzarella cheese was estimated. At the end of the trial, bulk milk of each group was processed to produce mozzarella cheese and chemical (fat, protein, ash, pH) composition, fatty acids composition, carotenoids and tocopherols content were determined. A sensory test was also performed. The oxidative stability was measured on mozzarella cheese and on governing liquid. Results: No significant differences were observed, neither for milk yield and body condition score, nor for milk characteristics. The fat was higher (p<0.05) in mozzarella of DSOP fed group but, saturated fatty acids were lower and unsaturated higher (p<0.01). Furthermore, lower atherogenic (p<0.01), and thrombogenic (p<0.05) indices were found in mozzarella cheese of DSOP fed group. In addition, the administration of DSOP did not affect the mozzarella cheese oxidative stability and no negative effect was found in the sensory properties. Conclusion: No contraindications appeared for the inclusion of DSOP in the diet of lactating buffaloes. Besides, important effects on mozzarella cheese quality were obtained, such as a modification of fat content and attributes with an increment in the mono-unsaturated. Additionally, a lower saturated/unsaturated ratio and atherogenic and thrombogenic indices suggest an improvement of dietetic and nutritional characteristics of mozzarella cheese.

Hydrothermal Alteration Around the TA 26 Seamounts of the Tofua Volcanic Arc in Lau Basin, Tonga (통가국 라우분지 TA 26 해저산의 열수변질작용)

  • Cho, Hyen Goo;Kim, Young-Ho;Um, In Kwon;Choi, Hunsoo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.25 no.4
    • /
    • pp.233-247
    • /
    • 2012
  • We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

Study on the Change of Strength and Water Vapour Diffusion Resistant of Stone by Soluble Salt (수용성 염에 의한 암석의 강도와 수증기확산저항도 변화에 관한 연구)

  • Lim, Kwon-Woong;Do, Jin-Young
    • Journal of Conservation Science
    • /
    • v.25 no.2
    • /
    • pp.147-154
    • /
    • 2009
  • The change of strength and water vapour diffusion resistant by soluble salts was investigated in the tuff and granite used in many stone monuments of Gyeongju area. With $Na_2SO_4$ and $CaSO_4{\cdot}2H_2O$ were treated the rock samples to understand the difference of solubility. The densities of the tested rocks were increased by the impregnation of $CaSO_4{\cdot}2H_2O$ and $Na_2SO_4$. The flexural strength was increased in the tuff samples but decreased in the granite as the salts increased in the pore. In the tuff, the uniaxial compressive strength was increased by $CaSO_4{\cdot}2H_2O$, but decreased by $Na_2SO_4$. In the granite, it was decreased slightly by $CaSO_4{\cdot}2H_2O$, but increased by $Na_2SO_4$. The water vapour diffusion resistant was increased by the salts in both rocks. As results, it was cleared that the mechanical strength colud be increased in early stage of weathering by the accumulation of salt and water vapour diffusion resistant.

  • PDF

Improved Physical Properties of Ni-doped $BiFeO_3$ Ceramic

  • Yoo, Y.J.;Park, J.S.;Kang, J.H.;Kim, J.;Lee, B.W.;Kim, K.W.;Lee, Y.P.
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.250-250
    • /
    • 2012
  • Recently, multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and potential technological applications in magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because of its very interesting magnetoelectric properties for application to spintronics. Enhanced ferromagnetism was found by Fe-site ion substitution with magnetic ions. In this study, $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Fe_3O_4$ and NiO powders were mixed with the stoichiometric proportions, and calcined at $450^{\circ}C$ for 24 h to produce $BiFe_{1-x}Ni_xO_3$. Then, the samples were directly put into the oven, which was heated up to $800^{\circ}C$ and sintered in air for 20 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The Raman measurements were carried out with a Raman spectrometer with 514.5-nm-excitation Ar+-laser source under air ambient condition on a focused area of $1-{\mu}m$ diameter. The field-dependent magnetization and the temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The x-ray diffraction study demonstrates the compressive stress due to Ni substitution at the Fe site. $BiFe_{0.95}Ni_{0.05}O_3$ exhibits the rhombohedral perovskite structure R3c, similar to $BiFeO_3$. The lattice constant of $BiFe_{0.95}Ni_{0.05}O_3$ is smaller than of $BiFeO_3$ because of the smaller ionic radius of Ni3+ than that of Fe3+. The field-dependent magnetization of $BiFe_{0.95}Ni_{0.05}O_3$ exhibits a clear hysteresis loop at 300 K. The magnetic properties of $BiFe_{0.95}Ni_{0.05}O_3$ were improved at room temperature because of the existence of structurally compressive stress.

  • PDF

The New X-ray Induced Electron Emission Spectrometer

  • Yu.N.Yuryev;Park, Hyun-Min;Lee, Hwack-Ju;Kim, Ju-Hwnag;Cho, Yang-Ku;K.Yu.Pogrebitsky
    • Proceedings of the Korea Crystallographic Association Conference
    • /
    • 2002.11a
    • /
    • pp.5-6
    • /
    • 2002
  • The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

  • PDF

Mineralogy and Geochemistry of Shale Deposits in the Lower Anambra Basin, Nigeria: Implication for Provenance, Tectonic Setting and Depositional Environment

  • Olugbenga Okunlola;Agonsi Udodirim Lydia;Aliyu Ohiani Umaru;Raymond Webrah Kazapoe;Olusegun G. Olisa
    • Economic and Environmental Geology
    • /
    • v.56 no.6
    • /
    • pp.799-816
    • /
    • 2023
  • Mineralogical and geochemical studies of shales within the Lower Anambra Basin was conducted to unravel the depositional environment, provenance, maturity, paleo-weathering conditions, and tectonic settings. Mineralogical studies conducted using X-ray diffraction analysis revealed that the samples were composed of kaolinite, montmorillonite, chlorite, and illite. KaolinIite is the dominant mineral, constituting approximately 41.5% of the bulk composition, whereas the non-clay minerals are quartz, ilmenite, and sillimanite. Geochemical analysis showed a predominance of SiO2, Al2O3, and Fe2O3 contents of the shale samples with mean values of 52.29%, 14.09%, and 6.15% for Imo Shale (IS); 52.31%, 16.70%, and 7.39% for Mamu Shale (MS); 43.21%, 21.33%, and 10.36% for Enugu Shale (ES); 53.35%, 15.64%, and 7.17% for Nkporo Shale (NS); and 51.24%, 17.25%, and 7.78% for Agwu Shale (AS). However, the shales were depleted in Na2O, MgO, K2O, MnO, TiO2, CaO, and P2O5. The trace element ratios of Ni/Co and Cu/Zn of the shale suggest an oxic depositional environment. The average SiO2 vs. Al2O3 ratio of the shales indicated textural maturity. Compared to the PAAS standard, the shales plot below the PAAS value of 0.85, suggesting a high degree of maturity and intensive chemical weathering, further confirmed on a CIA vs. PIA plot. On log (K2O/Na2O) against SiO2 and tectonic setting discriminant function diagrams, the shales plot mostly in the field of passive continental margin tectonic setting. The discriminant function diagrams as well as Al2O3/TiO2 ratio of the shales showed that they were derived from a mixed source (mafic and intermediate igneous rocks).

Determination and prediction of amino acid digestibility in brown rice for growing-finishing pigs

  • Qing Ouyang;Rui Li;Ganyi Feng;Gaifeng Hou;Xianji Jiang;Xiaojie Liu;Hui Tang;Ciming Long;Jie Yin;Yulong Yin
    • Animal Bioscience
    • /
    • v.37 no.8
    • /
    • pp.1474-1482
    • /
    • 2024
  • Objective: The experiment aimed to determine the standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in 10 brown rice samples fed to pigs, and to construct predictive models for SID of CP and AA based on the physical characteristics and chemical composition of brown rice. Methods: Twenty-two cannulated pigs (initial body weight: 42.0±1.2 kg) were assigned to a replicated 11×3 incomplete Latin square design, including an N-free diet and 10 brown rice diets. Each period included 5 d adaptation and 2 d ileal digesta collection. Chromic oxide was added at 0.3% to all the diets as an indigestible marker for calculating the ileal CP and AA digestibility. Results: The coefficients of variation of all detected indices for physical characteristics and chemical composition, except for bulk weight, dry matter (DM) and gross energy, in 10 brown rice samples were greater than 10%. The SID of CP, lysine (Lys), methionine, threonine (Thr), and tryptophan (Trp) in brown rice was 77.2% (62.6% to 85.5%), 87.5% (80.3% to 94.3%), 89.2% (78.9% to 98.9%), 55.4% (46.1% to 67.6%) and 92.5% (86.3% to 96.3%), respectively. The best prediction equations for the SID of CP, Lys, Thr, and Trp were as following, SIDCP = -664.181+8.484×DM (R2 = 0.40), SIDLys = 53.126+6.031×ether extract (EE)+0.893×thousand-kernel volume (R2 = 0.66), SIDThr = 39.916+7.843×EE (R2 = 0.41), and SIDTrp = -361.588+4.891×DM+0.387×total starch (R2 = 0.85). Conclusion: Overall, a great variation exists among 10 sources of brown rice, and the thousand-grain volume, DM, EE, and total starch can be used as the key predictors for SID of CP and AA.

Research on Interest Rate Determinants in Shipping Loans (선박금융의 금리결정 요인에 관한 연구)

  • Chung, Kyung-Suk;Lee, Ki-Hwan;Kim, Myoung-Hee
    • Journal of Korea Port Economic Association
    • /
    • v.40 no.1
    • /
    • pp.133-149
    • /
    • 2024
  • According to previous studies, the key factor in determining the loan interest rate for shipping companies is the default risk premium. Therefore, this study analyzes the determinants of the risk premium of shipping loans using a multiple linear regression model. With the risk premium as the dependent variable, a total of 10 independent variables are selected, including three factors: loan characteristics, borrower's creditworthiness, and economic situation. Samples are 82 shipping loans supported by Bank A from 2014 to 2022. As a result, borrower's creditworthiness(current ratio, debt ratio, firm age) and economic situation(freight index) affect the risk premium in analysis for all samples. It is found that borrower's creditworthiness has some influence on the risk premium for container ships(current ratio, cash holding ratio, debt ratio, operating income to sales) and bulk carriers(debt ratio, firm age). Market situation affects the risk premium in gas carriers. However, in the model targeting tanker ships, unlike previous studies, all factors have no effect on the risk premium.

Comparison of Standard Culture Method and Real-time PCR Assay for Detection of Staphylococcus aureus in Processed and Unprocessed Foods (가공식품과 비가공식품에서의 황색포도상구균 검출을 위한 배지법과 Real-time PCR법의 비교)

  • Lee, Jae-Hoon;Song, Kwang-Young;Hyeon, Ji-Yeon;Hwang, In-Gyun;Kwak, Hyo-Sun;Han, Jeong-A;Chung, Yun-Hee;Seo, Kun-Ho
    • Food Science of Animal Resources
    • /
    • v.30 no.3
    • /
    • pp.410-418
    • /
    • 2010
  • Staphylococcus aureus is one of the major pathogens that can cause staphylococcal infection and food poisoning. In this study, we compared conventional culture methods and real-time PCR for detection of S. aureus in artificially inoculated milk, sausage, raw pork, and vegetable salad. The performance of a coagulase test for confirming S. aureus was also compared with a colony PCR test. Bulk food samples (500 g each) were artificially inoculated with S. aureus and divided into 20 samples (25 g or mL each). All samples were added to tryptic soy broth (225 mL/sample) with 10% NaCl and incubated at $37^{\circ}C$ for 24 h. After the enrichment, broth cultures were streaked onto Baird-Parker (BP) agar with egg yolk tellulite, and incubated at $37^{\circ}C$ for 24 h. In addition, 1 mL of broth cultures was collected to perform real-time PCR. Two suspicious colonies from the BP agar were picked up and plated on nutrient agar and incubated at $37^{\circ}C$ for 24 h followed, by a coagulase confirmation test and a colony PCR analysis. There were no statistical differences between culture methods and realtime PCR in food samples with low background microflora, such as milk and sausage. However, a significant statistical difference was found between the culture methods and real-time PCR for raw pork and vegetable salad. Furthermore, the colony PCR test of the presumptive colonies on BP agar for confirming S. aureus is more accurate and efficient than the coagulase test for unprocessed foods.

$^{17}O$ NMR Study On Water Excharge Rate of Paramagnetic Contrast Agents ($^{17}O$ NMR 기법을 이용한 상자성 자기공명조영제의 물분자 교환에 관한 연구)

  • Yongmin Chang;Sung Wook Hong;Moon Jung Hwang;Il Soo Rhee;Duk-Sik Kang
    • Investigative Magnetic Resonance Imaging
    • /
    • v.5 no.1
    • /
    • pp.33-37
    • /
    • 2001
  • Purpose : The water exchange rate between bulk water and bound water is an important parameter in deciding the efficiency of paramagnetic contrast agents. In this study, we evaluated the water exchange rates of various Gd-chelates using oxygen-17 NMR technique. Material and Methods : The samples (Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA, Gd-EOB-DTPA) were prepared by mixing 5% $^{17}O-enriched$ water (Isotech, USA). The pH of the samples was adjusted to physiological value [pH=7.0] by buffer solution. The variable temperature $^{17}O-NMR$ measurements were performed using Bruker-600 (14.1 T, 81.3 MHz) spectrometer. Bruker VT-1000 temperature control units were used to stabilize the temperature. The $^{17}O$ spin-spin relaxation times (T2) were measured using Carr-Purcell-Meiboom-Gill (CPMG)I pulse sequence with 24 echo trains. The variable temperature T2 relaxation data were then fitted into Solomon-Bloembergen equations using least square fit algorithm to estimate the water exchange times. Results : From the measured $^{17}O-NMR$ relaxation rates, the determined water exchange rates at 300K are $0.42{\;}{\mu}s$ for Gd-DTPA, $1.99{\;}{\mu}s$ for Gd-DTPA-BMA, $0.27{\;}{\mu}s$ for Gd-DOTA, and $0.11{\;}{\mu}s$ for Gd-EOB-DTPA. The Gd-DTPA-BMA showed slowest exchange whereas Gd-EOB-DTPA had fastest water exchange rate. In addition, it was found that the water exchange rates (${\tau}_m$) of all samples had exponential temperature dependence with different decay constant. Conclusion : $^{17}O-NMR$ relaxation rate measurements, when combined with variable temperature technique, provide a solid tool for studying water exchange rate, which is very important in investigating the detailed mechanism of relaxation enhancement effect of the paramagnetic contrast agents.

  • PDF